Deepak Blow Moulding Private Limited
About Deepak Blow Moulding Private Limited
Data last updated:
Deepak Blow Moulding Private Limited was a private limited company based in Rajkot, Gujarat, India. The company has been converted to a Limited Liability Partnership (LLP) and no longer exists as a company. For the latest details, refer to the successor LLP. It operated in the fabricated metal products segment of the plastics and polymers sector. It was incorporated on 13 February 2003.
The company was registered with the Registrar of Companies (ROC), Ahmedabad, under CIN U25206GJ2003PTC041990. Its GSTIN is 24AABCD9202F1Z4 (Gujarat).
The company had an authorised share capital of ₹2 Lakh and a paid-up capital of ₹2 Lakh. It was led by directors Tapaskumar Deepakkumar Tilva and Smitaben Deepakbhai Tilwa.
Its last annual general meeting (AGM) was held on 30 September 2023, and its latest financial statements are for the year ended 31 March 2023. The registered office was at Royal Park, Rajkot, Gujarat.
As per the financials filed for FY 2023, the company reported a revenue of ₹13.4 Lakh, a decline of 93% compared to the previous year. For the same year it recorded a net loss of ₹29.48 Lakh (net margin -220.1%) and EBITDA of ₹13.1 Lakh (EBITDA margin 97.8%). Revenue has declined at a compounded annual rate (CAGR) of 16% over three years and 13% over five years.
Company details
Contact details
Deepak Blow Moulding Private Limited's registered office is in Rajkot, Gujarat. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered Address71 Orbit Tower 8 – Royal Park, Behind G T Seth School 150 Feet Ring Road, Rajkot, Gujarat, India – 360005
- IndustryPlastics, Fabricated Metal Products, Plastic Products, Rubber Products, Non-Metallic Mineral Products
To see the full contact details of Deepak Blow Moulding Private Limited, buy the company report.
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
Financials of Deepak Blow Moulding Private Limited
FY 2023 filings availableDeepak Blow Moulding Private Limited reported revenue of ₹13.4 Lakh (down 93% YoY) for FY 2023.
Compounded Annual Growth Rate (CAGR)
Revenue has declined at a compounded annual rate (CAGR) of 13% over five years, including a 93% fall in the latest year. EBITDA fell 93% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹13.1 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | -₹29.48 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 97.8% | ||||
| Net Profit Margin | -220.1% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Deepak Blow Moulding Private Limited, buy the company report.
Board of directors of Deepak Blow Moulding Private Limited
Deepak Blow Moulding has 2 current directors and 3 former directors. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Tapaskumar Deepakkumar Tilva Also directs: Deepak Blow Moulding LLP | Director | 13 Feb 2003 | 23 Years 9 Months | As last reported |
| Smitaben Deepakbhai Tilwa Also directs: Deepak Blow Moulding LLP | Director | 25 Sep 2020 | 6 Years 1 Months | As last reported |
Auditor
Deepak Blow Moulding Private Limited is audited by Santoki & Co for the financial year 2017.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| Santoki & Co | FY 2017 | 112080 |
Shareholding
The shareholding of Deepak Blow Moulding Private Limited is on record for 2 financial years, the latest being FY 2017, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2017 | FY 2016 |
|---|---|---|
| Promoters | ||
| Domestic institutional investors (DII) | ||
| Foreign institutional investors (FII) | ||
| Public | ||
| Others |
To see the full shareholding pattern of Deepak Blow Moulding Private Limited, buy the company report.
Legal cases
No court or tribunal cases involving Deepak Blow Moulding Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Deepak Blow Moulding Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
Deepak Blow Moulding has 1 GST registration: 1 active.
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 24AABCD9202F1Z4 | Gujarat | Active | 01 Jul 2017 |
To see the full GST registrations and return filing status of Deepak Blow Moulding Private Limited, buy the company report.
Recent activity
Deepak Blow Moulding Private Limited has 5 board changes on record since 2003: 2 appointments and 3 cessations. The latest: Smitaben Deepakbhai Tilwa ceased to be Additional Director on 31 Dec 2020.
Frequently asked questions
Deepak Blow Moulding has been "Converted to LLP" - the business changed its legal structure from a company to a Limited Liability Partnership. The original company no longer exists in its previous form. For the latest information, refer to the successor LLP entity registered with MCA.
Deepak Blow Moulding was a private limited company based in Rajkot, Gujarat, India. The company worked in fabricated metal products, within the plastics industry. It was incorporated on 13 February 2003 and is registered under CIN U25206GJ2003PTC041990. For the latest details, refer to the successor LLP entity.
The CIN (Corporate Identification Number) of Deepak Blow Moulding is U25206GJ2003PTC041990. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Deepak Blow Moulding had 2 directors:
- Tapaskumar Deepakkumar Tilva - Director
- Smitaben Deepakbhai Tilwa - Director
Deepak Blow Moulding was incorporated on 13 February 2003. It is registered with the Registrar of Companies, Ahmedabad.
The registered office of Deepak Blow Moulding is at 71 Orbit Tower 8 – Royal Park, Behind G T Seth School 150 Feet Ring Road, Rajkot, Gujarat, India – 360005.
The latest financial statements of Deepak Blow Moulding on record with the MCA are for the year ended 31 March 2023. Its last annual general meeting was held on 30 September 2023. Year-wise statements from 2015 are in the company report.
The GSTIN of Deepak Blow Moulding is 24AABCD9202F1Z4, registered in Gujarat.
Deepak Blow Moulding operated in the plastics industry, in the fabricated metal products segment.
Smitaben Deepakbhai Tilwa ceased to be Additional Director on 31 Dec 2020. Mohanlal Mahidas Patel ceased to be Director on 26 Sep 2020. Prakashkumar Mohanlal Tilva ceased to be Director on 26 Sep 2020. Deepak Blow Moulding has 5 board changes on record in total.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
