MSME (Udyam registered) Ministry of MSME
- Category
- Small (2024-25)
- Udyam number
- UDYAM-OD-07-0009068
Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding Private Limited - manufacturing in Cuttack, Odisha, India. FY 2026 financials & compliance.
Revenue · FY 2024
₹18 Cr
▲ 15% YoY
Net profit · FY 2024
₹16 Lakh
Net margin 0.9%
EBITDA · FY 2024
₹2.53 Cr
EBITDA margin 14%
Authorised capital
₹1 Cr
Registered with MCA
Paid-up capital
₹98.31 Lakh
Issued & subscribed
Open charges
₹8.29 Cr
Satisfied ₹16.04 Lakh
Company age
9 yrs
Est. 2017
Directors on board
3
As per MCA filings
About Aadi Polyextrusion & Moulding Private Limited
Data last updated:
Aadi Polyextrusion & Moulding Private Limited is a private limited company based in Cuttack, Odisha, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 08 November 2017 and has been in existence for over 9 years.
The company is registered with the Registrar of Companies (ROC), Cuttack, under CIN U93000OR2017PTC027880. Its GSTIN is 21AAQCA2037G1Z1 (Odisha).
The company has an authorised share capital of ₹1 Cr and a paid-up capital of ₹98.31 Lakh. It is led by directors including Shyam Sundar Poddar and Kaushal Poddar.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Plot No. S – 3/44 & S – 3/45 New Industrial Estate Jagatpur, Cuttack, Odisha, India – 753008.
As per the financials filed for FY 2024, the company reported a revenue of ₹18 Cr, a growth of 15% compared to the previous year. For the same year it recorded a net profit of ₹16 Lakh (net margin 0.9%) and EBITDA of ₹2.53 Cr (EBITDA margin 14%). Revenue has grown at a compounded annual rate (CAGR) of 23% over three years and 104% over five years.
As per MCA filings, the company has open charges of ₹8.29 Cr and satisfied charges of ₹16.04 Lakh on record.
Aadi Polyextrusion & Moulding Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-OD-07-0009068). The current compliance status is marked as compliant by the Registrar of Companies.
Company Details of Aadi Polyextrusion & Moulding Private Limited
CIN U93000OR2017PTC027880
Registration Number 027880
Incorporation Date 08 November 2017
ROC Cuttack
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-OD-07-0009068
Recognitions & Rankings of Aadi Polyextrusion & Moulding
Contact Details
- EmailLocked
- TelephoneLocked
- WebsiteLocked
- Social MediaLocked
- Registered AddressPlot No. S – 3/44 & S – 3/45 New Industrial Estate Jagatpur, Cuttack, Odisha, India – 753008
- IndustryManufacturing, Plastic-Based Products, Fittings & Components
Comprehensive company report
Aadi Polyextrusion & Moulding Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
- One PDF report, delivered after checkout
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business Activity of Aadi Polyextrusion & Moulding Private Limited
The main business activity of Aadi Polyextrusion & Moulding is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main Activity Group Code | Description of Main Activity | Business Activity Code | Description of Business Activity | Turnover Percentage |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products | Locked |
Premium access
Business activity turnover details
Turnover share and past changes in activity are in the company report.
- Turnover contribution
- Historical classifications
- Filing-level activity changes
Verified entity values are shown only after access is granted.
Financials of Aadi Polyextrusion & Moulding Private Limited FY 2025 filings available
Aadi Polyextrusion & Moulding Private Limited reported revenue of ₹18 Cr (up 15% YoY) for FY 2024.
Revenue · FY 2024
₹18 Cr ▲ 15%
Net profit · FY 2024
₹16 Lakh margin 0.9%
EBITDA · FY 2024
₹2.53 Cr margin 14%
Compounded Annual Growth Rate (CAGR) of Aadi Polyextrusion & Moulding Private Limited
Revenue CAGR growth
1 year
▲ 15%
3 years · compounded
▲ 23%
5 years · compounded
▲ 104%
EBITDA CAGR growth
1 year
▲ 56%
3 years · compounded
▲ 32%
5 years · compounded
▲ 106%
Revenue has grown at a compounded annual rate (CAGR) of 104% over five years, including 15% growth in the latest year. EBITDA rose 56% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary of Aadi Polyextrusion & Moulding Private Limited
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | •••• | •••• | •••• | •••• | •••• |
| Other Income | •••• | •••• | •••• | •••• | •••• |
| Total Revenue | •••• | •••• | •••• | •••• | •••• |
| Cost of Materials Consumed | •••• | •••• | •••• | •••• | •••• |
| Employee Benefit Expense | •••• | •••• | •••• | •••• | •••• |
| Finance Costs | •••• | •••• | •••• | •••• | •••• |
| Depreciation and Amortisation | •••• | •••• | •••• | •••• | •••• |
| Other Expenses | •••• | •••• | •••• | •••• | •••• |
| Total Expenses | •••• | •••• | •••• | •••• | •••• |
| EBITDA | ₹2.53 Cr | •••• | •••• | •••• | •••• |
| Profit Before Tax | •••• | •••• | •••• | •••• | •••• |
| Tax Expense | •••• | •••• | •••• | •••• | •••• |
| Net Profit (PAT) | ₹16 Lakh | •••• | •••• | •••• | •••• |
| Balance Sheet | |||||
| Share Capital | •••• | •••• | •••• | •••• | •••• |
| Reserves and Surplus | •••• | •••• | •••• | •••• | •••• |
| Net Worth (Total Equity) | •••• | •••• | •••• | •••• | •••• |
| Long-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Short-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Trade Payables | •••• | •••• | •••• | •••• | •••• |
| Total Liabilities | •••• | •••• | •••• | •••• | •••• |
| Fixed Assets | •••• | •••• | •••• | •••• | •••• |
| Investments | •••• | •••• | •••• | •••• | •••• |
| Inventories | •••• | •••• | •••• | •••• | •••• |
| Trade Receivables | •••• | •••• | •••• | •••• | •••• |
| Cash and Bank Balance | •••• | •••• | •••• | •••• | •••• |
| Total Assets | •••• | •••• | •••• | •••• | •••• |
Financial Ratios of Aadi Polyextrusion & Moulding Private Limited
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 14% | •••• | •••• | •••• | •••• |
| Net Profit Margin | 0.9% | •••• | •••• | •••• | •••• |
| Return on Equity (ROE) | •••• | •••• | •••• | •••• | •••• |
| Return on Capital Employed (ROCE) | •••• | •••• | •••• | •••• | •••• |
| Return on Assets (ROA) | •••• | •••• | •••• | •••• | •••• |
| Liquidity and Debt | |||||
| Current Ratio | •••• | •••• | •••• | •••• | •••• |
| Quick Ratio | •••• | •••• | •••• | •••• | •••• |
| Debt-to-Equity Ratio | •••• | •••• | •••• | •••• | •••• |
| Interest Coverage Ratio | •••• | •••• | •••• | •••• | •••• |
| Efficiency and Growth | |||||
| Asset Turnover | •••• | •••• | •••• | •••• | •••• |
| Receivable Days | •••• | •••• | •••• | •••• | •••• |
| Payable Days | •••• | •••• | •••• | •••• | •••• |
| Inventory Days | •••• | •••• | •••• | •••• | •••• |
| Revenue Growth | •••• | •••• | •••• | •••• | •••• |
| Net Profit Growth | •••• | •••• | •••• | •••• | •••• |
Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Aadi Polyextrusion & Moulding are in the company report.
Premium access
Financial statements from FY 2018
Earlier years and trend charts are in the company report.
- Income statements
- Balance sheets
- Cash-flow statements
- Ratios and benchmarks
Verified entity values are shown only after access is granted.
Board of Directors of Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding has 3 directors on record. No former directors are listed.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Shyam Sundar Poddar Also directs: Orissa Plasto Pipes Pvt Ltd, J P Ferrous Limited, Ardent Steel Private Limited and 2 more | Director | 08 Nov 2017 | 8 Years 11 Months | Current |
| Kaushal Poddar Also directs: Orissa Plasto Pipes Pvt Ltd, J P Ferrous Limited, Chandaneswar Enterprises Limited and 2 more | Director | 08 Nov 2017 | 8 Years 11 Months | Current |
| Sheetal Poddar Also directs: Sheetal Plastic Tubes Private Limited | Director | 01 Sep 2021 | 5 Years 1 Months | Current |
Peer Comparison of Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding Private Limited is compared with the companies closest to it by revenue in the Manufacturing industry (Fittings, Plastic Based Products). Net profit, margin and employee counts of each company are in the company report.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Pravesh Door Private Limited | ₹18.07 Cr (FY 2025) | •••• | •••• | 43.0% | •••• | Variav, Gujarat, India |
| Red Star Polymers Private Limited | ₹18.06 Cr (FY 2025) | •••• | •••• | •••• | Tiruvallur, Tamil Nadu, India | |
| Nexgen Fluoropolymers Private Limited | ₹18.06 Cr (FY 2024) | •••• | •••• | 10.0% | •••• | Delhi, India |
| Sanidhya Polytech Private Limited | ₹18.02 Cr (FY 2025) | •••• | •••• | 44.0% | •••• | Rajkot, Gujarat, India |
| Jai Shiv Texfab Private Limited | ₹18.01 Cr (FY 2025) | •••• | •••• | 52.0% | •••• | Bhiwani, Haryana, India |
| Aadi Polyextrusion & Moulding Private Limited this company | ₹18 Cr (FY 2024) | •••• | •••• | 15.0% | •••• | Cuttack, Odisha, India |
| R.E Polytechnologies Private Limited | ₹18 Cr (FY 2025) | •••• | •••• | 6.0% | •••• | Vadodara, Gujarat, India |
| Diamond Flanges and Fittings Private Limited | ₹17.94 Cr (FY 2025) | •••• | •••• | -24.0% | •••• | Howrah, West Bengal, India |
| Family Plastic Private Limited | ₹17.91 Cr (FY 2025) | •••• | •••• | 7.0% | •••• | Thiruvananthapuram, Kerala, India |
| Virtue Plast Private Limited | ₹17.9 Cr (FY 2024) | •••• | •••• | 16.0% | •••• | Navi Mumbai, Maharashtra, India |
| Mahishmati Plastics Private Limited | ₹17.89 Cr (FY 2024) | •••• | •••• | 5.0% | •••• | Nimrani, Madhya Pradesh, India |
Peers are the five companies nearest above and the five nearest below Aadi Polyextrusion & Moulding by revenue in the Manufacturing industry (Fittings, Plastic Based Products), from the latest filed financials of each company. Net profit, margin and employee counts of each peer are in the company report.
Auditor Details of Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding Private Limited is audited by R K DAS AND ASSOCIATES for the financial year 2023.
| Name | Status | Appointment Date | Cessation Date |
|---|---|---|---|
| R K DAS AND ASSOCIATES | Locked | Locked | Locked |
Premium access
Complete auditor history
Appointment and cessation dates and past auditor changes are in the company report.
- Appointment status
- Appointment dates
- Cessation dates
- Auditor changes
Verified entity values are shown only after access is granted.
Ownership and Shareholding of Aadi Polyextrusion & Moulding Private Limited
Premium access
Shareholding and ownership data
Promoter, institutional, public and beneficial ownership figures are in the company report.
- Ownership categories
- Historical changes
- Group structure
- FII and DII holdings
Verified entity values are shown only after access is granted.
Charges & Borrowings of Aadi Polyextrusion & Moulding Private Limited
Open charges
₹8.29 Cr
Satisfied charges
₹16.04 Lakh
Breakdown by lending institutions
Latest charge details
| Date | Lender | Amount | Status |
|---|---|---|---|
| 06 Dec 2022 | Hdfc Bank Limited | ₹14.9 Lakh | Open |
| 08 Feb 2020 | Hdfc Bank Limited | ₹8.14 Cr | Open |
| 27 Nov 2021 | Hdfc Bank Limited | ₹16.04 Lakh | Satisfied |
Total charge records: 3 View all charges
Employees and EPFO Compliance at Aadi Polyextrusion & Moulding Private Limited
Employment history and EPFO contributions of people linked to Aadi Polyextrusion & Moulding.
Premium access
Employee and EPFO history
Monthly headcount, contribution history and filing status are in the company report.
- Monthly headcount
- PF contributions
- ECR filing status
- Establishment history
Verified entity values are shown only after access is granted.
Recent Activity on Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding Private Limited has 3 board changes on record since 2017: 3 appointments. The latest: Sheetal Poddar was appointed as Director on 01 Sep 2021.
AGM
Aadi Polyextrusion & Moulding Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Filing
Aadi Polyextrusion & Moulding Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Cuttack.
Charges
A charge with Hdfc Bank Limited of Rs. 8.14 Cr registered on 08 Feb 2020 with Charge ID 100333714 was modified on 04 Dec 2024.
Charges
A charge registered on 27 Nov 2021 via Charge ID 100522403 with Hdfc Bank Limited was fully satisfied on 07 Nov 2024.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 0.15 Cr with Charge ID 100663977 was registered on 06 Dec 2022.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 0.16 Cr with Charge ID 100522403 was registered on 27 Nov 2021.
Appointed
Sheetal Poddar was appointed as Director.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 8.14 Cr with Charge ID 100333714 was registered on 08 Feb 2020.
Appointed
Kaushal Poddar was appointed as Director.
Appointed
Shyam Sundar Poddar was appointed as Director.
Incorporation
08 Nov 2017
Aadi Polyextrusion & Moulding Private Limited was registered on 08 Nov 2017 with Roc Cuttack & aged 8 years 11 months as per MCA records.
Credit Ratings, Litigation & Regulatory Alerts for Aadi Polyextrusion & Moulding Private Limited
Premium access
Credit ratings, litigation, and regulatory alerts
Credit ratings, court records and regulatory alerts are in the company report.
- Rating history
- Court and tribunal cases
- Regulatory alerts
- Director-linked violations
Verified entity values are shown only after access is granted.
MSME Payment Delays by Aadi Polyextrusion & Moulding Private Limited
Premium access
MSME payment history
Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.
- Outstanding amounts
- Delay periods and reasons
- MSME-1 filing history
- Vendor payment signals
Verified entity values are shown only after access is granted.
Subsidiaries & Group Companies of Aadi Polyextrusion & Moulding Private Limited
Premium access
Corporate group structure
Parent, subsidiary, associate and joint venture records with holdings are in the company report.
- Parent company
- Subsidiaries and ownership
- Associates and joint ventures
- Entity investments
Verified entity values are shown only after access is granted.
GST Compliance of Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 21AAQCA2037G1Z1 | Odisha | Active | 20 Dec 2017 |
Premium access
GST registrations and filing compliance
State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.
- GSTIN registrations
- State-wise filing status
- HSN and SAC details
- Tax jurisdiction records
Verified entity values are shown only after access is granted.
MCA Filings & Documents of Aadi Polyextrusion & Moulding Private Limited
Premium access
MCA filings and documents
Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.
- Incorporation documents
- Annual returns and statements
- Charge filings
- Complete filing index
Verified entity values are shown only after access is granted.
Frequently Asked Questions about Aadi Polyextrusion & Moulding Private Limited
Aadi Polyextrusion & Moulding is an active private limited company based in Cuttack, Odisha, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 08 November 2017 (9+ years old) and is registered under CIN U93000OR2017PTC027880.
Aadi Polyextrusion & Moulding reported revenue of ₹18 Cr for FY 2024 (up 15% YoY).
Aadi Polyextrusion & Moulding has 3 current directors:
- Shyam Sundar Poddar - Director
- Kaushal Poddar - Director
- Sheetal Poddar - Director
Aadi Polyextrusion & Moulding reported a net profit of ₹16 Lakh (net margin 0.9%) and EBITDA of ₹2.53 Cr (EBITDA margin 14%) for FY 2024, as per its filed financial statements.
The compounded annual growth rate (CAGR) of the revenue of Aadi Polyextrusion & Moulding is 23% over three years and 104% over five years. In the latest year (FY 2024) revenue rose 15%. CAGR is the steady yearly rate that links the first and the last year.
The GSTIN of Aadi Polyextrusion & Moulding is 21AAQCA2037G1Z1, registered in Odisha.
The CIN (Corporate Identification Number) of Aadi Polyextrusion & Moulding is U93000OR2017PTC027880. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Aadi Polyextrusion & Moulding was incorporated on 08 November 2017, making it 9+ years old. It is registered with the Registrar of Companies, Cuttack.
The peers of Aadi Polyextrusion & Moulding by revenue are Pravesh Door Private Limited, Red Star Polymers Private Limited, Nexgen Fluoropolymers Private Limited, Sanidhya Polytech Private Limited, Jai Shiv Texfab Private Limited and 5 more, all in the Manufacturing industry (Fittings, Plastic Based Products).
Sheetal Poddar was appointed as Director on 01 Sep 2021. Kaushal Poddar was appointed as Director on 08 Nov 2017. Shyam Sundar Poddar was appointed as Director on 08 Nov 2017.
Yes, Aadi Polyextrusion & Moulding is registered as a small enterprise under Udyam registration (number: UDYAM-OD-07-0009068).