MSME (Udyam registered) Ministry of MSME
- Category
- Micro (2020-21)
- Udyam number
- UDYAM-TN-08-0005491
Adhishri Plastics and Technologies Private Limited
Adhishri Plastics and Technologies Private Limited - manufacturing in Sriperumbudur, Tamil Nadu, India. FY 2026 financials & compliance.
Revenue · FY 2024
₹5.92 Cr
▲ 13% YoY
Net loss · FY 2024
₹2.75 Lakh
Net margin -0.5%
EBITDA · FY 2024
₹17.48 Lakh
EBITDA margin 3%
Authorised capital
₹10 Lakh
Registered with MCA
Paid-up capital
₹10 Lakh
Issued & subscribed
Open charges
₹57.04 Lakh
Satisfied ₹57.04 Lakh
Company age
8 yrs
Est. 2018
Directors on board
2
As per MCA filings
About Adhishri Plastics and Technologies Private Limited
Data last updated:
Adhishri Plastics and Technologies Private Limited is a private limited company based in Sriperumbudur, Tamil Nadu, India. It operates in the rubber-based products segment of the manufacturing sector. It was incorporated on 04 December 2018 and has been in existence for over 8 years.
The company is registered with the Registrar of Companies (ROC), Chennai, under CIN U25209TN2018PTC126145. Its GSTIN is 33AARCA6392B1ZN (Tamil Nadu).
The company has an authorised share capital of ₹10 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors Jayalakshmi and Rishi Kumar Venkatraman.
Its last annual general meeting (AGM) was held on 30 September 2024, and its latest financial statements are for the year ended 31 March 2024. The registered office is at No.9 Sri Ramakrishna Nagar Amarambedu Village, Sriperumbudur, Tamil Nadu, India – 600069.
As per the financials filed for FY 2024, the company reported a revenue of ₹5.92 Cr, a growth of 13% compared to the previous year. For the same year it recorded a net loss of ₹2.75 Lakh (net margin -0.5%) and EBITDA of ₹17.48 Lakh (EBITDA margin 3%). Revenue has grown at a compounded annual rate (CAGR) of 5% over three years and 35% over five years.
As per MCA filings, the company has open charges of ₹57.04 Lakh and satisfied charges of ₹57.04 Lakh on record. Court records list 7 cases involving the company, including 6 filed by the company and 1 filed against it; 3 cases are pending.
Adhishri Plastics and Technologies Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-TN-08-0005491).
Company details
CIN U25209TN2018PTC126145
Registration Number 126145
Incorporation Date 04 December 2018
ROC Chennai
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2024
Date of Balance Sheet 31 March 2024
MSME Classification Micro
Udyam Registration UDYAM-TN-08-0005491
Recognitions & Rankings of Adhishri Plastics and Technologies
Contact details
Adhishri Plastics and Technologies Private Limited's registered office is in Sriperumbudur, Tamil Nadu. Its e-mail address is in the company report.
- Email
- Registered AddressNo.9 Sri Ramakrishna Nagar Amarambedu Village, Sriperumbudur, Tamil Nadu, India – 600069
- IndustryManufacturing, Rubber-Based Products, Plastic-Based Products
To see the full contact details of Adhishri Plastics and Technologies Private Limited, buy the company report.
Comprehensive company report
Adhishri Plastics and Technologies Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Adhishri Plastics and Technologies is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Adhishri Plastics and Technologies Private Limited, buy the company report.
Financials of Adhishri Plastics and Technologies Private Limited
FY 2024 filings availableAdhishri Plastics and Technologies Private Limited reported revenue of ₹5.92 Cr (up 13% YoY) for FY 2024.
Revenue · FY 2024
₹5.92 Cr ▲ 13%
Net loss · FY 2024
₹2.75 Lakh margin -0.5%
EBITDA · FY 2024
₹17.48 Lakh margin 3%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▲ 13%
3 years · compounded
▼ 5%
5 years · compounded
▲ 35%
EBITDA CAGR growth
1 year
▲ 55%
3 years · compounded
▼ 10%
5 years · compounded
▲ 67%
Revenue has grown at a compounded annual rate (CAGR) of 35% over five years, including 13% growth in the latest year. EBITDA rose 55% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹17.48 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | -₹2.75 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 3% | ||||
| Net Profit Margin | -0.5% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Adhishri Plastics and Technologies Private Limited, buy the company report.
Board of directors of Adhishri Plastics and Technologies Private Limited
Adhishri Plastics and Technologies has 2 current directors and 8 former directors. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Jayalakshmi | Director | 27 Jan 2022 | 4 Years 9 Months | Current |
| Rishi Kumar Venkatraman | Director | 08 Apr 2019 | 7 Years 7 Months | Current |
Peer comparison
Adhishri Plastics and Technologies Private Limited is compared with the 5 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products, Rubber Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| I.A. Bhai Enterprises Private Limited | ₹5.95 Cr (FY 2025) | 13.0% | Noida, Uttar Pradesh, India | |||
| Kodanda Polypacks Private Limited | ₹5.94 Cr (FY 2018) | -24.0% | Hyderabad, Andhra Pradesh, India | |||
| S.R.Beadings Limited | ₹5.92 Cr (FY 2025) | 30.0% | Alwar, Rajasthan, India | |||
| Adhishri Plastics and Technologies Private Limitedthis company | ₹5.92 Cr (FY 2024) | -₹2.75 Lakh | -0.5% | 13.0% | Sriperumbudur, Tamil Nadu, India | |
| Onkar Polymers Private Limited | ₹5.92 Cr (FY 2025) | 11.0% | Punjab, India | |||
| Hanson Petro Private Limited | ₹5.92 Cr (FY 2022) | -3.0% | Punjab, India |
To see the full peer comparison of Adhishri Plastics and Technologies Private Limited, buy the company report.
Auditor
Adhishri Plastics and Technologies Private Limited is audited by A ARUL ANTO & CO for the financial year 2021.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| A ARUL ANTO & CO | FY 2021 | 013020S |
Shareholding
The shareholding of Adhishri Plastics and Technologies Private Limited is on record for 2 financial years, the latest being FY 2021, split between promoters, domestic institutions, public shareholders and others.
| Shareholder category | FY 2021 | FY 2019 |
|---|---|---|
| Promoters | ||
| Domestic institutional investors (DII) | ||
| Public | ||
| Others |
To see the full shareholding pattern of Adhishri Plastics and Technologies Private Limited, buy the company report.
Charges & borrowings
Open charges
₹57.04 Lakh
Satisfied charges
₹57.04 Lakh
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 28 Jun 2023 | 100743574 | Bank of India | ₹5 Lakh | Satisfied | |
| 29 Mar 2023 | 100726704 | Others | ₹34.34 Lakh | Satisfied | |
| 18 Jun 2020 | 100348805 | Bank of India | ₹2.7 Lakh | Satisfied | |
| 18 Oct 2019 | 100299439 | Bank of India | ₹15 Lakh | Satisfied |
To see the full charge records of Adhishri Plastics and Technologies Private Limited, buy the company report.
Total charge records: 4 View all charges
Legal cases
Adhishri Plastics and Technologies Private Limited has 7 court cases on record: 6 filed by Adhishri Plastics and Technologies, 1 filed against it. 3 cases are pending and 4 are disposed.
Total cases
7
Filed by the company
6
Filed against the company
1
Pending
3
Disposed
4
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| High courts | 6 | 0 | 2 |
| District courts | 1 | 1 | 1 |
Cases on record (5 of 7)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, Chennai, Tamil Nadu | Court case (PC) | Filed against the company by Cholamandalam Investment and Finance Company Ltd Rep by D.Vimalan | Pending |
| Madras High Court | Writ petition | Filed by the company against The State Tax Officer | Pending |
| Madras High Court | Interim or miscellaneous application | Filed by the company against The State Tax Officer | Pending |
| Madras High Court | Writ petition | Filed by the company against an individual | Disposed |
| Madras High Court | Interim or miscellaneous application | Filed by the company against an individual | Disposed |
To see the full case history of Adhishri Plastics and Technologies Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Adhishri Plastics and Technologies Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
Adhishri Plastics and Technologies has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 33AARCA6392B1ZN | Tamil Nadu | Active | 28 Dec 2018 |
To see the full GST registrations and return filing status of Adhishri Plastics and Technologies Private Limited, buy the company report.
Recent activity
Adhishri Plastics and Technologies Private Limited has 10 board changes on record since 2019: 2 appointments and 8 cessations. The latest: Jayalakshmi ceased to be Additional Director on 30 Sep 2022.
Charges
A charge registered on 18 Oct 2019 via Charge ID 100299439 with Bank Of India was fully satisfied on 13 Dec 2024.
AGM
Adhishri Plastics And Technologies Private Limited last Annual general meeting of members was held on 30 Sep 2024 as per latest MCA records.
Charges
A charge registered on 29 Mar 2023 via Charge ID 100726704 with Others was fully satisfied on 24 Aug 2024.
Charges
A charge registered on 28 Jun 2023 via Charge ID 100743574 with Bank Of India was fully satisfied on 11 Jun 2024.
Charges
A charge registered on 18 Jun 2020 via Charge ID 100348805 with Bank Of India was fully satisfied on 05 Jun 2024.
Filing
Adhishri Plastics And Technologies Private Limited has filed its annual Financial statements for the year ended 31 Mar 2024 with Roc Chennai.
Charges
A charge with Bank Of India amounted to Rs. 5.00 Lakh with Charge ID 100743574 was registered on 28 Jun 2023.
Charges
A charge with Others amounted to Rs. 34.34 Lakh with Charge ID 100726704 was registered on 29 Mar 2023.
Charges
A charge with Others of Rs. 34.34 Lakh registered on 29 Mar 2023 with Charge ID 100726704 was modified on 29 Mar 2023.
Ceased
Jayalakshmi ceased to be Additional Director.
Ceased
Arunkumar ceased to be Managing Director.
Appointed
Jayalakshmi was appointed as Director.
10 earlier events are in the company report.
Frequently asked questions
Adhishri Plastics and Technologies is an active private limited company based in Sriperumbudur, Tamil Nadu, India. The company works in rubber-based products, within the manufacturing industry. It was incorporated on 04 December 2018 (8+ years old) and is registered under CIN U25209TN2018PTC126145.
Adhishri Plastics and Technologies has 2 current directors:
- Jayalakshmi - Director
- Rishi Kumar Venkatraman - Director
The latest financial statements of Adhishri Plastics and Technologies on record with the MCA are for the year ended 31 March 2024. Its last annual general meeting was held on 30 September 2024. Year-wise statements from FY 2019 are in the company report.
The GSTIN of Adhishri Plastics and Technologies is 33AARCA6392B1ZN, registered in Tamil Nadu.
The CIN (Corporate Identification Number) of Adhishri Plastics and Technologies is U25209TN2018PTC126145. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Adhishri Plastics and Technologies has 7 court cases on record: 6 filed by the company and 1 filed against it. 3 are pending. Most are in the high courts.
Adhishri Plastics and Technologies was incorporated on 04 December 2018, making it 8+ years old. It is registered with the Registrar of Companies, Chennai.
The peers of Adhishri Plastics and Technologies by revenue are I.A. Bhai Enterprises Private Limited, Kodanda Polypacks Private Limited, S.R.Beadings Limited, Onkar Polymers Private Limited, Hanson Petro Private Limited, all in the Manufacturing industry (Plastic Based Products, Rubber Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Jayalakshmi ceased to be Additional Director on 30 Sep 2022. Arunkumar ceased to be Managing Director on 27 Jan 2022. Jayalakshmi was appointed as Director on 27 Jan 2022. Adhishri Plastics and Technologies has 10 board changes on record in total.
Yes, Adhishri Plastics and Technologies is registered as a micro enterprise under Udyam registration (number: UDYAM-TN-08-0005491).
The registered office of Adhishri Plastics and Technologies is at No.9 Sri Ramakrishna Nagar Amarambedu Village, Sriperumbudur, Tamil Nadu, India – 600069.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
Swiggy Limited Listed company · 92 pages
BharatPe (Resilient Innovations Pvt Ltd) Unlisted company · 78 pages