Advantek Moulding Technologies Private Limited
About Advantek Moulding Technologies Private Limited
Data last updated:
Advantek Moulding Technologies Private Limited is a private limited company based in Delhi, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 07 September 2011 and has been in existence for over 15 years.
The company is registered with the Registrar of Companies (ROC), Delhi, under CIN U29253DL2011PTC224681. The company has 2 GST registrations on record, none of which is active.
The company has an authorised share capital of ₹1 Lakh and a paid-up capital of ₹1 Lakh. It is led by directors Harish Sharma and Kamla Sharma.
Its last annual general meeting (AGM) was held on 30 September 2023, and its latest financial statements are for the year ended 31 March 2023. The registered office is at 19 – Block – 3A Wea Sat Nagar Karol Bagh, Delhi, India – 110005.
As per the financials filed for FY 2023, the company reported a revenue of ₹6.99 Cr, a decline of 11% compared to the previous year. For the same year it recorded a net profit of ₹1.06 Lakh (net margin 0.2%) and EBITDA of ₹32.42 Lakh (EBITDA margin 4.6%). Revenue has grown at a compounded annual rate (CAGR) of 42% over five years.
As per MCA filings, the company has open charges of ₹1.44 Cr and satisfied charges of ₹2.12 Cr on record.
The current compliance status is marked as compliant by the Registrar of Companies.
- EmailLocked
- TelephoneLocked
- WebsiteLocked
- Social MediaLocked
- Registered Address19 – Block – 3A Wea Sat Nagar Karol Bagh, Delhi, India – 110005
- IndustryManufacturing, Plastic-Based Products
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
- One PDF report, delivered after checkout
Business Activity of Advantek Moulding Technologies Private Limited
The main business activity of Advantek Moulding Technologies is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main Activity Group Code | Description of Main Activity | Business Activity Code | Description of Business Activity | Turnover Percentage |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products | Locked |
Business activity turnover details
Turnover share and past changes in activity are in the company report.
- Turnover contribution
- Historical classifications
- Filing-level activity changes
Verified entity values are shown only after access is granted.
Financials of Advantek Moulding Technologies Private Limited FY 2023 filings available
Advantek Moulding Technologies Private Limited reported revenue of ₹6.99 Cr (down 11% YoY) for FY 2023.
Compounded Annual Growth Rate (CAGR) of Advantek Moulding Technologies Private Limited
Revenue fell 11% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 42%. EBITDA rose 42% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary of Advantek Moulding Technologies Private Limited
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | ₹6.99 Cr | •••• | •••• | •••• | •••• |
| Other Income | •••• | •••• | •••• | •••• | •••• |
| Total Revenue | •••• | •••• | •••• | •••• | •••• |
| Cost of Materials Consumed | •••• | •••• | •••• | •••• | •••• |
| Employee Benefit Expense | •••• | •••• | •••• | •••• | •••• |
| Finance Costs | •••• | •••• | •••• | •••• | •••• |
| Depreciation and Amortisation | •••• | •••• | •••• | •••• | •••• |
| Other Expenses | •••• | •••• | •••• | •••• | •••• |
| Total Expenses | •••• | •••• | •••• | •••• | •••• |
| EBITDA | ₹32.42 Lakh | •••• | •••• | •••• | •••• |
| Profit Before Tax | •••• | •••• | •••• | •••• | •••• |
| Tax Expense | •••• | •••• | •••• | •••• | •••• |
| Net Profit (PAT) | ₹1.06 Lakh | •••• | •••• | •••• | •••• |
| Balance Sheet | |||||
| Share Capital | •••• | •••• | •••• | •••• | •••• |
| Reserves and Surplus | •••• | •••• | •••• | •••• | •••• |
| Net Worth (Total Equity) | •••• | •••• | •••• | •••• | •••• |
| Long-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Short-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Trade Payables | •••• | •••• | •••• | •••• | •••• |
| Total Liabilities | •••• | •••• | •••• | •••• | •••• |
| Fixed Assets | •••• | •••• | •••• | •••• | •••• |
| Investments | •••• | •••• | •••• | •••• | •••• |
| Inventories | •••• | •••• | •••• | •••• | •••• |
| Trade Receivables | •••• | •••• | •••• | •••• | •••• |
| Cash and Bank Balance | •••• | •••• | •••• | •••• | •••• |
| Total Assets | •••• | •••• | •••• | •••• | •••• |
Financial Ratios of Advantek Moulding Technologies Private Limited
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 4.6% | •••• | •••• | •••• | •••• |
| Net Profit Margin | 0.2% | •••• | •••• | •••• | •••• |
| Return on Equity (ROE) | •••• | •••• | •••• | •••• | •••• |
| Return on Capital Employed (ROCE) | •••• | •••• | •••• | •••• | •••• |
| Return on Assets (ROA) | •••• | •••• | •••• | •••• | •••• |
| Liquidity and Debt | |||||
| Current Ratio | •••• | •••• | •••• | •••• | •••• |
| Quick Ratio | •••• | •••• | •••• | •••• | •••• |
| Debt-to-Equity Ratio | •••• | •••• | •••• | •••• | •••• |
| Interest Coverage Ratio | •••• | •••• | •••• | •••• | •••• |
| Efficiency and Growth | |||||
| Asset Turnover | •••• | •••• | •••• | •••• | •••• |
| Receivable Days | •••• | •••• | •••• | •••• | •••• |
| Payable Days | •••• | •••• | •••• | •••• | •••• |
| Inventory Days | •••• | •••• | •••• | •••• | •••• |
| Revenue Growth | •••• | •••• | •••• | •••• | •••• |
| Net Profit Growth | •••• | •••• | •••• | •••• | •••• |
Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Advantek Moulding Technologies are in the company report.
Financial statements from 2015
Earlier years and trend charts are in the company report.
- Income statements
- Balance sheets
- Cash-flow statements
- Ratios and benchmarks
Verified entity values are shown only after access is granted.
Peer Comparison of Advantek Moulding Technologies Private Limited
Advantek Moulding Technologies Private Limited is compared with the companies closest to it by revenue in the Manufacturing industry (Plastic Based Products). Revenue, net profit, margin and growth of each company are in the company report.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Jupiter Coaters Private Limited | •••• | •••• | •••• | •••• | - | Bishnupur - I, West Bengal, India |
| Ajit Polyplast Private Limited | •••• | •••• | •••• | •••• | - | Delhi, India |
| Chopra Polytubes Private Limited | •••• | •••• | •••• | •••• | - | Kanpur, Uttar Pradesh, India |
| Arr Freeflow Private Limited | •••• | •••• | •••• | •••• | - | Kanchipuram, Tamil Nadu, India |
| Bnezz India Private Limited | •••• | •••• | •••• | •••• | - | East Delhi, Delhi, India |
| Advantek Moulding Technologies Private Limited this company | •••• | •••• | •••• | •••• | - | Delhi, India |
| Samraj Polytex Limited | •••• | •••• | •••• | •••• | - | Delhi, India |
| Ajay Industrial Polymers Private Limited | •••• | •••• | •••• | •••• | - | Delhi, India |
| Polarplas India Private Limited | •••• | •••• | •••• | •••• | - | Ahmadabad City, Gujarat, India |
| JJN Polypack Private Limited | •••• | •••• | •••• | •••• | - | Delhi, India |
| Biraja Infra Solution Private Limited | •••• | •••• | •••• | •••• | - | Jajpur, Orissa, India |
Peers are the five companies nearest above and the five nearest below Advantek Moulding Technologies by revenue in the Manufacturing industry (Plastic Based Products), from the latest filed financials of each company. Revenue, net profit, margin and growth of each peer are in the company report.
Auditor Details of Advantek Moulding Technologies Private Limited
Advantek Moulding Technologies Private Limited is audited by USP & Co. for the financial year 2023.
| Name | Status | Appointment Date | Cessation Date |
|---|---|---|---|
| USP & Co. | Locked | Locked | Locked |
Complete auditor history
Appointment and cessation dates and past auditor changes are in the company report.
- Appointment status
- Appointment dates
- Cessation dates
- Auditor changes
Verified entity values are shown only after access is granted.
Board of Directors of Advantek Moulding Technologies Private Limited
Advantek Moulding Technologies has 2 current directors and 2 former directors. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Harish Sharma Also directs: Bio Tacticals Private Limited | Director | 07 Sep 2011 | 15 Years 1 Months | Current |
| Kamla Sharma | Director | 26 Dec 2012 | 13 Years 9 Months | Current |
Ownership and Shareholding of Advantek Moulding Technologies Private Limited
Shareholding and ownership data
Promoter, institutional, public and beneficial ownership figures are in the company report.
- Ownership categories
- Historical changes
- Group structure
- FII and DII holdings
Verified entity values are shown only after access is granted.
Charges & Borrowings of Advantek Moulding Technologies Private Limited
| Date | Lender | Amount | Status |
|---|---|---|---|
| 30 May 2013 | Others | ₹1.44 Cr | Open |
| 25 May 2021 | Others | ₹2.12 Cr | Satisfied |
Total charge records: 2 View all charges
Employees and EPFO Compliance at Advantek Moulding Technologies Private Limited
Employment history and EPFO contributions of people linked to Advantek Moulding Technologies.
Employee and EPFO history
Monthly headcount, contribution history and filing status are in the company report.
- Monthly headcount
- PF contributions
- ECR filing status
- Establishment history
Verified entity values are shown only after access is granted.
Recent Activity on Advantek Moulding Technologies Private Limited
Advantek Moulding Technologies Private Limited has 4 board changes on record since 2011: 2 appointments and 2 cessations. The latest: Kamla Sharma ceased to be Additional Director on 19 Jan 2019.
Credit Ratings, Litigation & Regulatory Alerts for Advantek Moulding Technologies Private Limited
Credit ratings, litigation, and regulatory alerts
Credit ratings, court records and regulatory alerts are in the company report.
- Rating history
- Court and tribunal cases
- Regulatory alerts
- Director-linked violations
Verified entity values are shown only after access is granted.
MSME Payment Delays by Advantek Moulding Technologies Private Limited
MSME payment history
Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.
- Outstanding amounts
- Delay periods and reasons
- MSME-1 filing history
- Vendor payment signals
Verified entity values are shown only after access is granted.
Subsidiaries & Group Companies of Advantek Moulding Technologies Private Limited
Corporate group structure
Parent, subsidiary, associate and joint venture records with holdings are in the company report.
- Parent company
- Subsidiaries and ownership
- Associates and joint ventures
- Entity investments
Verified entity values are shown only after access is granted.
GST Compliance of Advantek Moulding Technologies Private Limited
Advantek Moulding Technologies has 2 GST registrations on record, and all of them have been cancelled or are inactive. Only active GST numbers are listed on this page.
GST registrations and filing compliance
State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.
- GSTIN registrations
- State-wise filing status
- HSN and SAC details
- Tax jurisdiction records
Verified entity values are shown only after access is granted.
MCA Filings & Documents of Advantek Moulding Technologies Private Limited
MCA filings and documents
Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.
- Incorporation documents
- Annual returns and statements
- Charge filings
- Complete filing index
Verified entity values are shown only after access is granted.
Frequently Asked Questions about Advantek Moulding Technologies Private Limited
Advantek Moulding Technologies is an active private limited company based in Delhi, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 07 September 2011 (15+ years old) and is registered under CIN U29253DL2011PTC224681.
Advantek Moulding Technologies reported revenue of ₹6.99 Cr for FY 2023 (down 11% YoY).
Advantek Moulding Technologies has 2 current directors:
- Harish Sharma - Director
- Kamla Sharma - Director
Advantek Moulding Technologies reported a net profit of ₹1.06 Lakh (net margin 0.2%) and EBITDA of ₹32.42 Lakh (EBITDA margin 4.6%) for FY 2023, as per its filed financial statements.
The compounded annual growth rate (CAGR) of the revenue of Advantek Moulding Technologies is 42% over five years. In the latest year (FY 2023) revenue fell 11%. CAGR is the steady yearly rate that links the first and the last year.
No. Advantek Moulding Technologies has 2 GST registrations on record and all of them are cancelled or inactive.
The CIN (Corporate Identification Number) of Advantek Moulding Technologies is U29253DL2011PTC224681. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Advantek Moulding Technologies was incorporated on 07 September 2011, making it 15+ years old. It is registered with the Registrar of Companies, Delhi.
The peers of Advantek Moulding Technologies by revenue are Jupiter Coaters Private Limited, Ajit Polyplast Private Limited, Chopra Polytubes Private Limited, Arr Freeflow Private Limited, Bnezz India Private Limited and 5 more, all in the Manufacturing industry (Plastic Based Products).
Kamla Sharma ceased to be Additional Director on 19 Jan 2019. Meenakshi Sharma ceased to be Director on 19 Jan 2019. Kamla Sharma was appointed as Director on 26 Dec 2012. Advantek Moulding Technologies has 4 board changes on record in total.
The registered office of Advantek Moulding Technologies is at 19 – Block – 3A Wea Sat Nagar Karol Bagh, Delhi, India – 110005.