MSME (Udyam registered) Ministry of MSME
- Category
- Small (2023-24)
- Udyam number
- UDYAM-UP-28-0017207
Amitek Molders Private Limited
Amitek Molders Private Limited - manufacturing in Dadri, Uttar Pradesh, India. FY 2026 financials & compliance.
Revenue · FY 2025
₹9.85 Cr
▲ 27% YoY
Net profit · FY 2025
₹4.56 Lakh
Net margin 0.5%
EBITDA · FY 2025
₹73.08 Lakh
EBITDA margin 7.4%
Authorised capital
₹10 Lakh
Registered with MCA
Paid-up capital
₹10 Lakh
Issued & subscribed
Open charges
₹5.25 Cr
Satisfied ₹2.72 Cr
Company age
8 yrs
Est. 2018
Directors on board
2
As per MCA filings
About Amitek Molders Private Limited
Data last updated:
Amitek Molders Private Limited is a private limited company based in Dadri, Uttar Pradesh, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 05 June 2018 and has been in existence for over 8 years.
The company is registered with the Registrar of Companies (ROC), Kanpur, under CIN U25209UP2018PTC105008. Its GSTIN is 09AAQCA9847C1Z7 (Uttar Pradesh).
The company has an authorised share capital of ₹10 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors Meenakshi Sharma and Amit Sharma.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at A – 105 Sigma – 3, Dadri, Uttar Pradesh, India – 201310.
As per the financials filed for FY 2025, the company reported a revenue of ₹9.85 Cr, a growth of 27% compared to the previous year. For the same year it recorded a net profit of ₹4.56 Lakh (net margin 0.5%) and EBITDA of ₹73.08 Lakh (EBITDA margin 7.4%). Revenue has grown at a compounded annual rate (CAGR) of 13% over three years and 28% over five years.
As per MCA filings, the company has open charges of ₹5.25 Cr and satisfied charges of ₹2.72 Cr on record.
Amitek Molders Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-UP-28-0017207).
Company details
CIN U25209UP2018PTC105008
Registration Number 105008
Incorporation Date 05 June 2018
ROC Kanpur
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
MSME Classification Small
Udyam Registration UDYAM-UP-28-0017207
Key People
Meenakshi Sharma Director Amit Sharma Director Recognitions & Rankings of Amitek Molders
Contact details
Amitek Molders Private Limited's registered office is in Dadri, Uttar Pradesh. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressA – 105 Sigma – 3, Dadri, Uttar Pradesh, India – 201310
- IndustryManufacturing, Plastic-Based Products
To see the full contact details of Amitek Molders Private Limited, buy the company report.
Comprehensive company report
Amitek Molders Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Amitek Molders is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Amitek Molders Private Limited, buy the company report.
Financials of Amitek Molders Private Limited
FY 2025 filings availableAmitek Molders Private Limited reported revenue of ₹9.85 Cr (up 27% YoY) for FY 2025.
Revenue · FY 2025
₹9.85 Cr ▲ 27%
Net profit · FY 2025
₹4.56 Lakh margin 0.5%
EBITDA · FY 2025
₹73.08 Lakh margin 7.4%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▲ 27%
3 years · compounded
▲ 13%
5 years · compounded
▲ 28%
EBITDA CAGR growth
1 year
▲ 25%
3 years · compounded
▲ 28%
5 years · compounded
▲ 20%
Revenue has grown at a compounded annual rate (CAGR) of 28% over five years, including 27% growth in the latest year. EBITDA rose 25% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹73.08 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹4.56 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 7.4% | ||||
| Net Profit Margin | 0.5% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Amitek Molders Private Limited, buy the company report.
Board of directors of Amitek Molders Private Limited
Amitek Molders has 2 directors on record. No former directors are listed.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Meenakshi Sharma | Director | 05 Jun 2018 | 8 Years 5 Months | Current |
| Amit Sharma | Director | 05 Jun 2018 | 8 Years 5 Months | Current |
Peer comparison
Amitek Molders Private Limited is compared with the 6 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Kairav Elastomers Private Limited | ₹9.94 Cr (FY 2024) | 61.0% | Kolkata, West Bengal, India | |||
| Three Star Fine Chem Products Private Limited | ₹9.93 Cr (FY 2024) | 3.0% | Chennai, Tamil Nadu, India | |||
| Comfort Polymers Private Limited | ₹9.88 Cr (FY 2025) | 21.0% | Srinagar, Jammu and Kashmir, India | |||
| Mantri Plast Pvt. Ltd. | ₹9.86 Cr (FY 2017) | 2.0% | Mumbai, Maharashtra, India | |||
| Amitek Molders Private Limitedthis company | ₹9.85 Cr (FY 2025) | ₹4.56 Lakh | 0.5% | 27.0% | Dadri, Uttar Pradesh, India | |
| Dimer Poly Private Limited | ₹9.84 Cr (FY 2025) | -59.0% | New Delhi, Delhi, India | |||
| Rajvansh Polymers Private Limited | ₹9.82 Cr (FY 2025) | -31.0% | Kashipur, Uttarakhand, India |
To see the full peer comparison of Amitek Molders Private Limited, buy the company report.
Auditor
Amitek Molders Private Limited is audited by D S P L & COMPANY for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| D S P L & COMPANY | FY 2023 | 073924 |
Shareholding
The shareholding of Amitek Molders Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2022 | FY 2021 | FY 2020 | FY 2019 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Amitek Molders Private Limited, buy the company report.
Charges & borrowings
Open charges
₹5.25 Cr
Satisfied charges
₹2.72 Cr
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 25 Nov 2025 | 101188260 | Indian Bank | ₹36 Lakh | Open | |
| 25 Nov 2025 | 101188246 | Indian Bank | ₹55 Lakh | Open | |
| 23 Oct 2024 | 101040649 | Indian Bank | ₹3.84 Cr | Open | |
| 25 Jun 2022 | 100593034 | Others | ₹49.91 Lakh | Open | |
| 25 May 2022 | 100583016 | Others | ₹1.76 Cr | Satisfied |
To see the full charge records of Amitek Molders Private Limited, buy the company report.
Total charge records: 6 View all charges
Legal cases
No court or tribunal cases involving Amitek Molders Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
Amitek Molders Private Limited has 2 MSME Form 1 returns on record for the period ending Sep 2019, listing 6 overdue payments to 2 micro and small suppliers. Companies must report dues to micro and small suppliers that stay unpaid for more than 45 days in a half-yearly MSME Form 1 return.
Suppliers with reported dues (2 of 2)
| Supplier | Amount due | Due since | Reported on |
|---|---|---|---|
| an individual supplier | |||
| Aquent Polymers Private Limited |
To see the full MSME payment records of Amitek Molders Private Limited, buy the company report.
Individuals and sole proprietors among the suppliers are not named.
GST
Amitek Molders has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 09AAQCA9847C1Z7 | Uttar Pradesh | Active | 28 Aug 2018 |
To see the full GST registrations and return filing status of Amitek Molders Private Limited, buy the company report.
Recent activity
Amitek Molders Private Limited has 2 board changes on record since 2018: 2 appointments. The latest: Amit Sharma was appointed as Director on 05 Jun 2018.
Charges
A charge with Indian Bank amounted to Rs. 36.00 Lakh with Charge ID 101188260 was registered on 25 Nov 2025.
Charges
A charge with Indian Bank amounted to Rs. 55.00 Lakh with Charge ID 101188246 was registered on 25 Nov 2025.
AGM
Amitek Molders Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Filing
Amitek Molders Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Kanpur.
Charges
A charge registered on 25 May 2022 via Charge ID 100583016 with Others was fully satisfied on 13 Dec 2024.
Charges
A charge with Indian Bank amounted to Rs. 384.10 Lakh with Charge ID 101040649 was registered on 23 Oct 2024.
Charges
A charge with Others amounted to Rs. 49.91 Lakh with Charge ID 100593034 was registered on 25 Jun 2022.
Charges
A charge registered on 20 Dec 2018 via Charge ID 100235285 with Others was fully satisfied on 09 Jun 2022.
Charges
A charge with Others amounted to Rs. 176.20 Lakh with Charge ID 100583016 was registered on 25 May 2022.
Charges
A charge with Others of Rs. 96.01 Lakh registered on 20 Dec 2018 with Charge ID 100235285 was modified on 28 Jan 2020.
Charges
A charge with Others amounted to Rs. 96.01 Lakh with Charge ID 100235285 was registered on 20 Dec 2018.
Appointed
Amit Sharma was appointed as Director.
2 earlier events are in the company report.
Frequently asked questions
Amitek Molders is an active private limited company based in Dadri, Uttar Pradesh, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 05 June 2018 (8+ years old) and is registered under CIN U25209UP2018PTC105008.
Amitek Molders has 2 current directors:
- Meenakshi Sharma - Director
- Amit Sharma - Director
The latest financial statements of Amitek Molders on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from FY 2019 are in the company report.
The GSTIN of Amitek Molders is 09AAQCA9847C1Z7, registered in Uttar Pradesh.
The CIN (Corporate Identification Number) of Amitek Molders is U25209UP2018PTC105008. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Amitek Molders was incorporated on 05 June 2018, making it 8+ years old. It is registered with the Registrar of Companies, Kanpur.
The peers of Amitek Molders by revenue are Kairav Elastomers Private Limited, Three Star Fine Chem Products Private Limited, Comfort Polymers Private Limited, Mantri Plast Pvt. Ltd, Dimer Poly Private Limited and 1 more, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Amit Sharma was appointed as Director on 05 Jun 2018. Meenakshi Sharma was appointed as Director on 05 Jun 2018.
Yes, Amitek Molders is registered as a small enterprise under Udyam registration (number: UDYAM-UP-28-0017207).
Amitek Molders has 2 MSME Form 1 returns on record for the period ending Sep 2019, listing 6 overdue payments to 2 micro and small suppliers. The latest return was filed on 31 Oct 2019.
The registered office of Amitek Molders is at A – 105 Sigma – 3, Dadri, Uttar Pradesh, India – 201310.
Amitek Molders operates in the manufacturing industry, in the plastic-based products segment.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
Swiggy Limited Listed company · 92 pages
BharatPe (Resilient Innovations Pvt Ltd) Unlisted company · 78 pages