MSME (Udyam registered) Ministry of MSME
- Category
- Small (2024-25)
- Udyam number
- UDYAM-MP-16-0001247
Anand Metal Engineering Private Limited
Anand Metal Engineering Private Limited - consumer electronics & durables in Indore, Madhya Pradesh, India. FY 2026 financials & compliance.
Revenue · FY 2025
₹17.96 Cr
▲ 23% YoY
Net profit · FY 2025
₹10.23 Lakh
Net margin 0.6%
EBITDA · FY 2025
₹1.39 Cr
EBITDA margin 7.7%
Authorised capital
₹17 Lakh
Registered with MCA
Paid-up capital
₹16.6 Lakh
Issued & subscribed
Open charges
₹5.23 Cr
Satisfied ₹1 Cr
Company age
19 yrs
Est. 2007
Directors on board
4
As per MCA filings
About Anand Metal Engineering Private Limited
Data last updated:
Anand Metal Engineering Private Limited is a private limited company based in Indore, Madhya Pradesh, India. It operates in the electronics manufacturing segment of the consumer electronics and durables sector. It was incorporated on 03 May 2007 and has been in existence for over 19 years.
The company is registered with the Registrar of Companies (ROC), Gwalior, under CIN U27109MP2007PTC019500. Its GSTIN is 23AAGCA3422K1ZZ (Madhya Pradesh). The company holds 3 GST registrations, all of them active.
The company has an authorised share capital of ₹17 Lakh and a paid-up capital of ₹16.6 Lakh. It is led by directors including Suresh Kumar Tharumal Mata and Dilip Jain.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at 404 Navneet Plaza 5/2 Old Palasiya, Indore, Madhya Pradesh, India – 452001.
As per the financials filed for FY 2025, the company reported a revenue of ₹17.96 Cr, a growth of 23% compared to the previous year. For the same year it recorded a net profit of ₹10.23 Lakh (net margin 0.6%) and EBITDA of ₹1.39 Cr (EBITDA margin 7.7%). Revenue has grown at a compounded annual rate (CAGR) of 40% over three years and 73% over five years.
As per MCA filings, the company has open charges of ₹5.23 Cr and satisfied charges of ₹1 Cr on record. Court records list 2 cases involving the company, including 2 filed by the company; 2 cases are pending.
Anand Metal Engineering Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-MP-16-0001247). The current compliance status is marked as compliant by the Registrar of Companies.
Company Details of Anand Metal Engineering Private Limited
CIN U27109MP2007PTC019500
Registration Number 019500
Incorporation Date 03 May 2007
ROC Gwalior
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-MP-16-0001247
Recognitions & Rankings of Anand Metal Engineering
Contact Details
- EmailLocked
- TelephoneLocked
- WebsiteLocked
- Social MediaLocked
- Registered Address404 Navneet Plaza 5/2 Old Palasiya, Indore, Madhya Pradesh, India – 452001
- IndustryConsumer Electronics & Durables, Electronics Manufacturing
Comprehensive company report
Anand Metal Engineering Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
- One PDF report, delivered after checkout
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business Activity of Anand Metal Engineering Private Limited
The main business activity of Anand Metal Engineering is manufacturing. In detail, this covers electrical equipment, general purpose and special purpose machinery & equipment, transport equipment.
| Main Activity Group Code | Description of Main Activity | Business Activity Code | Description of Business Activity | Turnover Percentage |
|---|---|---|---|---|
| C | Manufacturing | C10 | Electrical equipment, General Purpose and Special purpose Machinery & equipment, Transport equipment | Locked |
Premium access
Business activity turnover details
Turnover share and past changes in activity are in the company report.
- Turnover contribution
- Historical classifications
- Filing-level activity changes
Verified entity values are shown only after access is granted.
Financials of Anand Metal Engineering Private Limited FY 2025 filings available
Anand Metal Engineering Private Limited reported revenue of ₹17.96 Cr (up 23% YoY) for FY 2025.
Revenue · FY 2025
₹17.96 Cr ▲ 23%
Net profit · FY 2025
₹10.23 Lakh margin 0.6%
EBITDA · FY 2025
₹1.39 Cr margin 7.7%
Compounded Annual Growth Rate (CAGR) of Anand Metal Engineering Private Limited
Revenue CAGR growth
1 year
▲ 23%
3 years · compounded
▲ 40%
5 years · compounded
▲ 73%
EBITDA CAGR growth
1 year
▲ 45%
3 years · compounded
▲ 14%
5 years · compounded
▲ 59%
Revenue has grown at a compounded annual rate (CAGR) of 73% over five years, including 23% growth in the latest year. EBITDA rose 45% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary of Anand Metal Engineering Private Limited
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | •••• | •••• | •••• | •••• | •••• |
| Other Income | •••• | •••• | •••• | •••• | •••• |
| Total Revenue | •••• | •••• | •••• | •••• | •••• |
| Cost of Materials Consumed | •••• | •••• | •••• | •••• | •••• |
| Employee Benefit Expense | •••• | •••• | •••• | •••• | •••• |
| Finance Costs | •••• | •••• | •••• | •••• | •••• |
| Depreciation and Amortisation | •••• | •••• | •••• | •••• | •••• |
| Other Expenses | •••• | •••• | •••• | •••• | •••• |
| Total Expenses | •••• | •••• | •••• | •••• | •••• |
| EBITDA | ₹1.39 Cr | •••• | •••• | •••• | •••• |
| Profit Before Tax | •••• | •••• | •••• | •••• | •••• |
| Tax Expense | •••• | •••• | •••• | •••• | •••• |
| Net Profit (PAT) | ₹10.23 Lakh | •••• | •••• | •••• | •••• |
| Balance Sheet | |||||
| Share Capital | •••• | •••• | •••• | •••• | •••• |
| Reserves and Surplus | •••• | •••• | •••• | •••• | •••• |
| Net Worth (Total Equity) | •••• | •••• | •••• | •••• | •••• |
| Long-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Short-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Trade Payables | •••• | •••• | •••• | •••• | •••• |
| Total Liabilities | •••• | •••• | •••• | •••• | •••• |
| Fixed Assets | •••• | •••• | •••• | •••• | •••• |
| Investments | •••• | •••• | •••• | •••• | •••• |
| Inventories | •••• | •••• | •••• | •••• | •••• |
| Trade Receivables | •••• | •••• | •••• | •••• | •••• |
| Cash and Bank Balance | •••• | •••• | •••• | •••• | •••• |
| Total Assets | •••• | •••• | •••• | •••• | •••• |
Financial Ratios of Anand Metal Engineering Private Limited
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 7.7% | •••• | •••• | •••• | •••• |
| Net Profit Margin | 0.6% | •••• | •••• | •••• | •••• |
| Return on Equity (ROE) | •••• | •••• | •••• | •••• | •••• |
| Return on Capital Employed (ROCE) | •••• | •••• | •••• | •••• | •••• |
| Return on Assets (ROA) | •••• | •••• | •••• | •••• | •••• |
| Liquidity and Debt | |||||
| Current Ratio | •••• | •••• | •••• | •••• | •••• |
| Quick Ratio | •••• | •••• | •••• | •••• | •••• |
| Debt-to-Equity Ratio | •••• | •••• | •••• | •••• | •••• |
| Interest Coverage Ratio | •••• | •••• | •••• | •••• | •••• |
| Efficiency and Growth | |||||
| Asset Turnover | •••• | •••• | •••• | •••• | •••• |
| Receivable Days | •••• | •••• | •••• | •••• | •••• |
| Payable Days | •••• | •••• | •••• | •••• | •••• |
| Inventory Days | •••• | •••• | •••• | •••• | •••• |
| Revenue Growth | •••• | •••• | •••• | •••• | •••• |
| Net Profit Growth | •••• | •••• | •••• | •••• | •••• |
Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Anand Metal Engineering are in the company report.
Premium access
Financial statements from 2015
Earlier years and trend charts are in the company report.
- Income statements
- Balance sheets
- Cash-flow statements
- Ratios and benchmarks
Verified entity values are shown only after access is granted.
Board of Directors of Anand Metal Engineering Private Limited
Anand Metal Engineering has 4 current directors and 7 former directors. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Suresh Kumar Tharumal Mata | Director | 21 Dec 2024 | 1 Years 10 Months | Current |
| Dilip Jain Also directs: Lampcap India Private Limited, Shri Ameya Electricals Pvt Ltd | Director | 01 Jul 2021 | 5 Years 3 Months | Current |
| Girish Nair Also directs: Lampcap India Private Limited, Shri Ameya Electricals Pvt Ltd | Director | 04 Apr 2025 | 1 Years 6 Months | Current |
| Anand Nair | Director | 04 Apr 2025 | 1 Years 6 Months | Current |
Peer Comparison of Anand Metal Engineering Private Limited
Anand Metal Engineering Private Limited is compared with the companies closest to it by revenue in the Consumer Durables industry (Electronic Appliances Manufacturing). Net profit, margin and employee counts of each company are in the company report.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Sky Electronics Private Limited | ₹18.06 Cr (FY 2025) | •••• | •••• | 12.0% | •••• | Mumbai, Maharashtra, India |
| Switcher India LLP | ₹18.02 Cr (FY 2021) | •••• | •••• | 11.0% | •••• | Delhi, India |
| Sarvadnya Udyog Private Limited | ₹18 Cr (FY 2025) | •••• | •••• | -14.0% | •••• | Thane, Maharashtra, India |
| Lumec Energy Private Limited | ₹17.99 Cr (FY 2024) | •••• | •••• | 45.0% | •••• | Unnao, Uttar Pradesh, India |
| Shree Ashoka Solar and Energy Private Limited | ₹17.98 Cr (FY 2025) | •••• | •••• | -56.0% | •••• | Nagpur, Maharashtra, India |
| Anand Metal Engineering Private Limited this company | ₹17.96 Cr (FY 2025) | •••• | •••• | 23.0% | •••• | Indore, Madhya Pradesh, India |
| NSR Lumen Tech Private Limited | ₹17.93 Cr (FY 2024) | •••• | •••• | -3.0% | •••• | New Delhi, Delhi, India |
| Sunnywell Technology Private Limited | ₹17.91 Cr (FY 2024) | •••• | •••• | 21121.0% | •••• | Noida, Uttar Pradesh, India |
| Esaplling Private Limited | ₹17.91 Cr (FY 2020) | •••• | •••• | 19.0% | •••• | Pune, Maharashtra, India |
| Kshitij Kitchencare Private Limited | ₹17.91 Cr (FY 2025) | •••• | •••• | 10.0% | •••• | Ambernath, Maharashtra, India |
| Paramount Commercial Corpn Pvt Ltd | ₹17.9 Cr (FY 2024) | •••• | •••• | 31.0% | •••• | Mumbai, Maharashtra, India |
Peers are the five companies nearest above and the five nearest below Anand Metal Engineering by revenue in the Consumer Durables industry (Electronic Appliances Manufacturing), from the latest filed financials of each company. Net profit, margin and employee counts of each peer are in the company report.
Auditor Details of Anand Metal Engineering Private Limited
Anand Metal Engineering Private Limited is audited by MANISH SAINI & CO. for the financial year 2023.
| Name | Status | Appointment Date | Cessation Date |
|---|---|---|---|
| MANISH SAINI & CO. | Locked | Locked | Locked |
Premium access
Complete auditor history
Appointment and cessation dates and past auditor changes are in the company report.
- Appointment status
- Appointment dates
- Cessation dates
- Auditor changes
Verified entity values are shown only after access is granted.
Ownership and Shareholding of Anand Metal Engineering Private Limited
Premium access
Shareholding and ownership data
Promoter, institutional, public and beneficial ownership figures are in the company report.
- Ownership categories
- Historical changes
- Group structure
- FII and DII holdings
Verified entity values are shown only after access is granted.
Charges & Borrowings of Anand Metal Engineering Private Limited
Open charges
₹5.23 Cr
Satisfied charges
₹1 Cr
Breakdown by lending institutions
Latest charge details
| Date | Lender | Amount | Status |
|---|---|---|---|
| 20 Apr 2021 | Uco Bank | ₹5.23 Cr | Open |
| 24 Aug 2016 | Uco Bank | ₹50 Lakh | Satisfied |
| 23 Aug 2016 | Uco Bank | ₹50 Lakh | Satisfied |
Total charge records: 3 View all charges
Legal Cases of Anand Metal Engineering Private Limited
Anand Metal Engineering Private Limited has 2 court cases on record: 2 filed by Anand Metal Engineering. All cases are pending. Status as checked between 21 Sep 2026 and 03 Oct 2026.
Total cases
2
Filed by the company
2
Pending
2
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 2 | 0 | 2 |
Cases on record (2 of 2)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, Indore, Madhya Pradesh | Court case (SC NIA) | Filed by the company against an individual | Pending |
| District court, Indore, Madhya Pradesh | Court case (UN CR) | Filed by the company against an individual | Pending |
Premium access
Full case history
All 2 cases with case numbers, court, year-wise trend, opposite parties and decision dates are in the company report.
- Every case with its case number
- Year-wise trend
- Opposite parties
- Decision dates and orders
Verified entity values are shown only after access is granted.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
Employees and EPFO Compliance at Anand Metal Engineering Private Limited
Employment history and EPFO contributions of people linked to Anand Metal Engineering.
Premium access
Employee and EPFO history
Monthly headcount, contribution history and filing status are in the company report.
- Monthly headcount
- PF contributions
- ECR filing status
- Establishment history
Verified entity values are shown only after access is granted.
Recent Activity on Anand Metal Engineering Private Limited
Anand Metal Engineering Private Limited has 11 board changes on record since 2010: 4 appointments and 7 cessations. The latest: Anand Nair was appointed as Director on 04 Apr 2025.
AGM
Anand Metal Engineering Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Appointed
Anand Nair was appointed as Director.
Appointed
Girish Nair was appointed as Director.
Filing
Anand Metal Engineering Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Gwalior.
Ceased
Manish Tamboli ceased to be Director.
Appointed
Suresh Kumar Tharumal Mata was appointed as Director.
Charges
A charge with Uco Bank of Rs. 522.50 Lakh registered on 20 Apr 2021 with Charge ID 100441025 was modified on 06 Apr 2024.
Appointed
Dilip Jain was appointed as Director.
Charges
A charge registered on 24 Aug 2016 via Charge ID 100047453 with Uco Bank was fully satisfied on 04 May 2021.
Charges
A charge registered on 23 Aug 2016 via Charge ID 100049275 with Uco Bank was fully satisfied on 03 May 2021.
Charges
A charge with Uco Bank amounted to Rs. 522.50 Lakh with Charge ID 100441025 was registered on 20 Apr 2021.
Ceased
Deosharan Trivedi ceased to be Director.
8 earlier events are listed in the company report.
Credit Ratings, Litigation & Regulatory Alerts for Anand Metal Engineering Private Limited
Premium access
Credit ratings, litigation, and regulatory alerts
Credit ratings, court records and regulatory alerts are in the company report.
- Rating history
- Court and tribunal cases
- Regulatory alerts
- Director-linked violations
Verified entity values are shown only after access is granted.
MSME Payment Delays by Anand Metal Engineering Private Limited
Premium access
MSME payment history
Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.
- Outstanding amounts
- Delay periods and reasons
- MSME-1 filing history
- Vendor payment signals
Verified entity values are shown only after access is granted.
Subsidiaries & Group Companies of Anand Metal Engineering Private Limited
Premium access
Corporate group structure
Parent, subsidiary, associate and joint venture records with holdings are in the company report.
- Parent company
- Subsidiaries and ownership
- Associates and joint ventures
- Entity investments
Verified entity values are shown only after access is granted.
GST Compliance of Anand Metal Engineering Private Limited
Anand Metal Engineering has 3 GST registrations: 3 active.
Total GSTINs
3
Active
3
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 23AAGCA3422K1ZZ | Madhya Pradesh | Active | 01 Jul 2017 |
| 23AAGCA3422K2ZY | Madhya Pradesh | Active | 11 Aug 2021 |
| 23AAGCA3422K3ZX | Madhya Pradesh | Active | 01 Apr 2025 |
Premium access
GST registrations and filing compliance
State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.
- GSTIN registrations
- State-wise filing status
- HSN and SAC details
- Tax jurisdiction records
Verified entity values are shown only after access is granted.
MCA Filings & Documents of Anand Metal Engineering Private Limited
Premium access
MCA filings and documents
Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.
- Incorporation documents
- Annual returns and statements
- Charge filings
- Complete filing index
Verified entity values are shown only after access is granted.
Frequently Asked Questions about Anand Metal Engineering Private Limited
Anand Metal Engineering is an active private limited company based in Indore, Madhya Pradesh, India. The company works in electronics manufacturing, within the consumer electronics and durables industry. It was incorporated on 03 May 2007 (19+ years old) and is registered under CIN U27109MP2007PTC019500.
Anand Metal Engineering reported revenue of ₹17.96 Cr for FY 2025 (up 23% YoY).
Anand Metal Engineering has 4 current directors:
- Suresh Kumar Tharumal Mata - Director
- Dilip Jain - Director
- Girish Nair - Director
- Anand Nair - Director
Anand Metal Engineering reported a net profit of ₹10.23 Lakh (net margin 0.6%) and EBITDA of ₹1.39 Cr (EBITDA margin 7.7%) for FY 2025, as per its filed financial statements.
The compounded annual growth rate (CAGR) of the revenue of Anand Metal Engineering is 40% over three years and 73% over five years. In the latest year (FY 2025) revenue rose 23%. CAGR is the steady yearly rate that links the first and the last year.
The GSTIN of Anand Metal Engineering is 23AAGCA3422K1ZZ, registered in Madhya Pradesh. The company has 3 GST registrations in all, of which 3 are active. Other active GSTINs include 23AAGCA3422K2ZY (Madhya Pradesh), 23AAGCA3422K3ZX (Madhya Pradesh).
The CIN (Corporate Identification Number) of Anand Metal Engineering is U27109MP2007PTC019500. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Anand Metal Engineering has 2 court cases on record: 2 filed by the company. 2 are pending.
Anand Metal Engineering was incorporated on 03 May 2007, making it 19+ years old. It is registered with the Registrar of Companies, Gwalior.
The peers of Anand Metal Engineering by revenue are Sky Electronics Private Limited, Switcher India LLP, Sarvadnya Udyog Private Limited, Lumec Energy Private Limited, Shree Ashoka Solar and Energy Private Limited and 5 more, all in the Consumer Durables industry (Electronic Appliances Manufacturing).
Anand Nair was appointed as Director on 04 Apr 2025. Girish Nair was appointed as Director on 04 Apr 2025. Manish Tamboli ceased to be Director on 25 Dec 2024. Anand Metal Engineering has 11 board changes on record in total.