MSME (Udyam registered) Ministry of MSME
- Category
- Micro (2022-23)
- Udyam number
- UDYAM-UP-28-0002170
Anjali Moulders Private Limited
Anjali Moulders Private Limited - manufacturing in Noida, Uttar Pradesh, India. FY 2026 financials & compliance.
Revenue · FY 2026
₹33.17 Lakh
▼ 16% YoY
Net profit · FY 2026
₹17.85 Lakh
Net margin 53.8%
EBITDA · FY 2026
₹29.09 Lakh
EBITDA margin 87.7%
Authorised capital
₹1 Lakh
Registered with MCA
Paid-up capital
₹1 Lakh
Issued & subscribed
Open charges
₹80.27 Cr
Secured borrowings
Company age
22 yrs
Est. 2004
Directors on board
3
As per MCA filings
About Anjali Moulders Private Limited
Data last updated:
Anjali Moulders Private Limited is a private limited company based in Noida, Uttar Pradesh, India, a subsidiary of Oss Construction Private Limited. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 25 June 2004 and has been in existence for over 22 years.
The company is registered with the Registrar of Companies (ROC), Uttar Pradesh, under CIN U25209UP2004PTC148166. Its GSTIN is 09AAFCA5973Q1ZU (Uttar Pradesh).
The company has an authorised share capital of ₹1 Lakh and a paid-up capital of ₹1 Lakh. It is led by directors including Vijay Kumar and Yogesh Shrivastava.
Its last annual general meeting (AGM) was held on 10 September 2026, and its latest financial statements are for the year ended 31 March 2026. The registered office is at C – 90 Sector 65 Noida, Uttar Pradesh, India – 201301.
As per the financials filed for FY 2026, the company reported a revenue of ₹33.17 Lakh, a decline of 16% compared to the previous year. For the same year it recorded a net profit of ₹17.85 Lakh (net margin 53.8%) and EBITDA of ₹29.09 Lakh (EBITDA margin 87.7%). Revenue has grown at a compounded annual rate (CAGR) of 1% over three years and 24% over five years.
As per MCA filings, the company has open charges of ₹80.27 Cr on record.
Anjali Moulders Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-UP-28-0002170). The current compliance status is marked as compliant by the Registrar of Companies.
Company details
CIN U25209UP2004PTC148166
Registration Number 148166
Incorporation Date 25 June 2004
ROC Uttar Pradesh
Listing Status Unlisted
Company Status Active
Date of Last AGM 10 September 2026
Date of Balance Sheet 31 March 2026
Parent Company Oss Construction Private Limited
Compliance Status Active Compliant
MSME Classification Micro
Udyam Registration UDYAM-UP-28-0002170
CIN history
Anjali Moulders has one previous CIN (Corporate Identification Number): U25209DL2004PTC127185. The current CIN is U25209UP2004PTC148166, which is the unique identifier assigned by the Registrar of Companies.
| CIN | Status |
|---|---|
| U25209UP2004PTC148166 | Current |
| U25209DL2004PTC127185 | Previous |
Recognitions & Rankings of Anjali Moulders
Contact details
Anjali Moulders Private Limited's registered office is in Noida, Uttar Pradesh. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressC – 90 Sector 65 Noida, Uttar Pradesh, India – 201301
- IndustryManufacturing, Plastic-Based Products
To see the full contact details of Anjali Moulders Private Limited, buy the company report.
Comprehensive company report
Anjali Moulders Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Financials of Anjali Moulders Private Limited
FY 2026 filings availableAnjali Moulders Private Limited reported revenue of ₹33.17 Lakh (down 16% YoY) for FY 2026.
Revenue · FY 2026
₹33.17 Lakh ▼ 16%
Net profit · FY 2026
₹17.85 Lakh margin 53.8%
EBITDA · FY 2026
₹29.09 Lakh margin 87.7%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▼ 16%
3 years · compounded
▼ 1%
5 years · compounded
▲ 24%
Revenue fell 16% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 24%. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2025-26 | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | ₹33.17 Lakh | ||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹29.09 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹17.85 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2025-26 | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 87.7% | ||||
| Net Profit Margin | 53.8% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Anjali Moulders Private Limited, buy the company report.
Board of directors of Anjali Moulders Private Limited
Anjali Moulders has 3 current directors and 7 former directors. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Vijay Kumar Also directs: Oss Construction Private Limited | Director | 03 Oct 2020 | 6 Years 1 Months | Current |
| Yogesh Shrivastava Also directs: Oss Construction Private Limited | Director | 03 Oct 2020 | 6 Years 1 Months | Current |
| Ramesh Kumar Singh Also directs: Oss Construction Private Limited | Director | 03 Oct 2020 | 6 Years 1 Months | Current |
Peer comparison
Anjali Moulders Private Limited is compared with the 10 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Bright Choice Ventures Private Limited | ₹39.99 Lakh (FY 2025) | Kanpur, Uttar Pradesh, India | ||||
| Asp Nanocepts Technologies Private Limited | ₹39.9 Lakh (FY 2025) | 253.0% | New Delhi, Delhi, India | |||
| GSS Multiplast Private Limited | ₹39.86 Lakh (FY 2025) | -72.0% | Delhi, India | |||
| S.V.Rubber Company Private Limited | ₹39.64 Lakh (FY 2024) | -42.0% | Telangana, India | |||
| Shree Alloy Industries Pvt Ltd | ₹39.52 Lakh (FY 2025) | 30896.0% | New Delhi, Delhi, India | |||
| Sambhav Polymers Private Limited | ₹39.2 Lakh (FY 2025) | 288.0% | New Delhi, Delhi, India | |||
| Uma Swastik Plast Private Limited | ₹39.09 Lakh (FY 2022) | -26.0% | Hyderabad, Telangana, India | |||
| Salai Pipes Private Limited | ₹39.06 Lakh (FY 2023) | -12.0% | Pudhukottai, Tamil Nadu, India | |||
| A.R.Plastics Private Limited | ₹39.02 Lakh (FY 2025) | 14.0% | Kota, Rajasthan, India | |||
| Plastvision India Private Limited | ₹38.98 Lakh (FY 2023) | 38400.0% | Gurugram, Haryana, India | |||
| Anjali Moulders Private Limitedthis company | ₹33.17 Lakh (FY 2026) | ₹17.85 Lakh | 53.8% | -16.0% | Noida, Uttar Pradesh, India |
To see the full peer comparison of Anjali Moulders Private Limited, buy the company report.
Auditor
Anjali Moulders Private Limited is audited by GOYAL MALHOTRA & ASSOCIATES for the financial year 2026.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| GOYAL MALHOTRA & ASSOCIATES | FY 2026 | 008015C |
Shareholding
The shareholding of Anjali Moulders Private Limited is on record for 5 financial years, the latest being FY 2026, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2026 | FY 2025 | FY 2024 | FY 2023 | FY 2022 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Anjali Moulders Private Limited, buy the company report.
Charges & borrowings
Open charges
₹80.27 Cr
Satisfied charges
None
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 14 Jul 2026 | 101349938 | Others | ₹6.25 Cr | Open | |
| 09 Jun 2026 | 101310343 | Others | ₹8.5 Cr | Open | |
| 26 Dec 2025 | 101214901 | Others | ₹15.6 Cr | Open | |
| 26 Mar 2021 | 100435355 | Others | ₹49.92 Cr | Open |
To see the full charge records of Anjali Moulders Private Limited, buy the company report.
Total charge records: 4 View all charges
Legal cases
No court or tribunal cases involving Anjali Moulders Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Anjali Moulders Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
Anjali Moulders has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 09AAFCA5973Q1ZU | Uttar Pradesh | Active | 20 Aug 2020 |
To see the full GST registrations and return filing status of Anjali Moulders Private Limited, buy the company report.
Recent activity
Anjali Moulders Private Limited has 10 board changes on record since 2011: 3 appointments and 7 cessations. The latest: Anitha Reddy ceased to be Director on 06 Oct 2020.
AGM
Anjali Moulders Private Limited last Annual general meeting of members was held on 10 Sep 2026 as per latest MCA records.
Charges
A charge with Others amounted to Rs. 625.00 Lakh with Charge ID 101349938 was registered on 14 Jul 2026.
Charges
A charge with Others amounted to Rs. 850.00 Lakh with Charge ID 101310343 was registered on 09 Jun 2026.
Filing
Anjali Moulders Private Limited has filed its annual Financial statements for the year ended 31 Mar 2026 with Roc Uttar Pradesh Ii.
Charges
A charge with Others amounted to Rs. 1,560.00 Lakh with Charge ID 101214901 was registered on 26 Dec 2025.
Charges
A charge with Others of Rs. 4,992.00 Lakh registered on 26 Mar 2021 with Charge ID 100435355 was modified on 21 Feb 2025.
Charges
A charge with Others amounted to Rs. 4,992.00 Lakh with Charge ID 100435355 was registered on 26 Mar 2021.
Ceased
Anitha Reddy ceased to be Director.
Ceased
Sujith Vallapa Reddy ceased to be Director.
Appointed
Ramesh Kumar Singh was appointed as Director.
Appointed
Vijay Kumar was appointed as Director.
Appointed
Yogesh Shrivastava was appointed as Director.
6 earlier events are in the company report.
Frequently asked questions
Anjali Moulders is an active private limited company based in Noida, Uttar Pradesh, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 25 June 2004 (22+ years old) and is registered under CIN U25209UP2004PTC148166.
Anjali Moulders has 3 current directors:
- Vijay Kumar - Director
- Yogesh Shrivastava - Director
- Ramesh Kumar Singh - Director
The latest financial statements of Anjali Moulders on record with the MCA are for the year ended 31 March 2026. Its last annual general meeting was held on 10 September 2026. Year-wise statements from 2015 are in the company report.
The GSTIN of Anjali Moulders is 09AAFCA5973Q1ZU, registered in Uttar Pradesh.
The CIN (Corporate Identification Number) of Anjali Moulders is U25209UP2004PTC148166. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Anjali Moulders was incorporated on 25 June 2004, making it 22+ years old. It is registered with the Registrar of Companies, Uttar Pradesh.
The peers of Anjali Moulders by revenue are Bright Choice Ventures Private Limited, Asp Nanocepts Technologies Private Limited, GSS Multiplast Private Limited, S.V.Rubber Company Private Limited, Shree Alloy Industries Pvt Ltd and 5 more, all in the Manufacturing industry (Plastic Based Products).
Anitha Reddy ceased to be Director on 06 Oct 2020. Sujith Vallapa Reddy ceased to be Director on 06 Oct 2020. Ramesh Kumar Singh was appointed as Director on 03 Oct 2020. Anjali Moulders has 10 board changes on record in total.
Yes, Anjali Moulders is registered as a micro enterprise under Udyam registration (number: UDYAM-UP-28-0002170).
The registered office of Anjali Moulders is at C – 90 Sector 65 Noida, Uttar Pradesh, India – 201301.
Anjali Moulders operates in the manufacturing industry, in the plastic-based products segment.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
Swiggy Limited Listed company · 92 pages
BharatPe (Resilient Innovations Pvt Ltd) Unlisted company · 78 pages