MSME (Udyam registered) Ministry of MSME
- Category
- Micro (2024-25)
- Udyam number
- UDYAM-HR-15-0000106
Ceido Tooling Private Limited
Ceido Tooling Private Limited - engineering in Rewari, Haryana, India. FY 2026 financials & compliance.
Revenue · FY 2024
₹2.08 Cr
▼ 5% YoY
Net profit · FY 2024
₹15.03 Lakh
Net margin 7.2%
EBITDA · FY 2024
₹60.02 Lakh
EBITDA margin 28.8%
Authorised capital
₹10 Lakh
Registered with MCA
Paid-up capital
₹10 Lakh
Issued & subscribed
Open charges
₹3.96 Cr
Secured borrowings
Company age
7 yrs
Est. 2019
Directors on board
2
As per MCA filings
About Ceido Tooling Private Limited
Data last updated:
Ceido Tooling Private Limited is a private limited company based in Rewari, Haryana, India. It operates in the engineering components retail and distribution segment of the engineering sector. It was incorporated on 13 December 2019 and has been in existence for over 7 years.
The company is registered with the Registrar of Companies (ROC), Haryana, under CIN U28999HR2019PTC084147. Its GSTIN is 06AAICC5244R1Z5 (Haryana).
The company has an authorised share capital of ₹10 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors Annu Yadav and Jitender Kumar.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Plot No. 133 Sector – 3 Phase 1 Bawal Industrial Area, Rewari, Haryana, India – 123501.
As per the financials filed for FY 2024, the company reported a revenue of ₹2.08 Cr, a decline of 5% compared to the previous year. For the same year it recorded a net profit of ₹15.03 Lakh (net margin 7.2%) and EBITDA of ₹60.02 Lakh (EBITDA margin 28.8%). Revenue has grown at a compounded annual rate (CAGR) of 21% over three years.
As per MCA filings, the company has open charges of ₹3.96 Cr on record. Court records list 2 cases involving the company, including 2 filed against it; 2 cases are pending.
Ceido Tooling Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-HR-15-0000106).
Company Details of Ceido Tooling Private Limited
CIN U28999HR2019PTC084147
Registration Number 084147
Incorporation Date 13 December 2019
ROC Haryana
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
MSME Classification Micro
Udyam Registration UDYAM-HR-15-0000106
Key People
Annu Yadav Director Jitender Kumar Director Recognitions & Rankings of Ceido Tooling
Contact Details
- EmailLocked
- TelephoneLocked
- WebsiteLocked
- Social MediaLocked
- Registered AddressPlot No. 133 Sector – 3 Phase 1 Bawal Industrial Area, Rewari, Haryana, India – 123501
- IndustryEngineering, Engineering Components Retail & Distribution
Comprehensive company report
Ceido Tooling Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
- One PDF report, delivered after checkout
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business Activity of Ceido Tooling Private Limited
The main business activity of Ceido Tooling is manufacturing. In detail, this covers metal and metal products.
| Main Activity Group Code | Description of Main Activity | Business Activity Code | Description of Business Activity | Turnover Percentage |
|---|---|---|---|---|
| C | Manufacturing | C7 | Metal and metal products | Locked |
Premium access
Business activity turnover details
Turnover share and past changes in activity are in the company report.
- Turnover contribution
- Historical classifications
- Filing-level activity changes
Verified entity values are shown only after access is granted.
Financials of Ceido Tooling Private Limited FY 2025 filings available
Ceido Tooling Private Limited reported revenue of ₹2.08 Cr (down 5% YoY) for FY 2024.
Revenue · FY 2024
₹2.08 Cr ▼ 5%
Net profit · FY 2024
₹15.03 Lakh margin 7.2%
EBITDA · FY 2024
₹60.02 Lakh margin 28.8%
Compounded Annual Growth Rate (CAGR) of Ceido Tooling Private Limited
Revenue CAGR growth
1 year
▼ 5%
3 years · compounded
▲ 21%
EBITDA CAGR growth
1 year
▼ 27%
3 years · compounded
▲ 43%
Revenue fell 5% in the latest year, but over three years it has grown at a compounded annual rate (CAGR) of 21%. EBITDA fell 27% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary of Ceido Tooling Private Limited
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | •••• | •••• | •••• | •••• | •••• |
| Other Income | •••• | •••• | •••• | •••• | •••• |
| Total Revenue | •••• | •••• | •••• | •••• | •••• |
| Cost of Materials Consumed | •••• | •••• | •••• | •••• | •••• |
| Employee Benefit Expense | •••• | •••• | •••• | •••• | •••• |
| Finance Costs | •••• | •••• | •••• | •••• | •••• |
| Depreciation and Amortisation | •••• | •••• | •••• | •••• | •••• |
| Other Expenses | •••• | •••• | •••• | •••• | •••• |
| Total Expenses | •••• | •••• | •••• | •••• | •••• |
| EBITDA | ₹60.02 Lakh | •••• | •••• | •••• | •••• |
| Profit Before Tax | •••• | •••• | •••• | •••• | •••• |
| Tax Expense | •••• | •••• | •••• | •••• | •••• |
| Net Profit (PAT) | ₹15.03 Lakh | •••• | •••• | •••• | •••• |
| Balance Sheet | |||||
| Share Capital | •••• | •••• | •••• | •••• | •••• |
| Reserves and Surplus | •••• | •••• | •••• | •••• | •••• |
| Net Worth (Total Equity) | •••• | •••• | •••• | •••• | •••• |
| Long-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Short-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Trade Payables | •••• | •••• | •••• | •••• | •••• |
| Total Liabilities | •••• | •••• | •••• | •••• | •••• |
| Fixed Assets | •••• | •••• | •••• | •••• | •••• |
| Investments | •••• | •••• | •••• | •••• | •••• |
| Inventories | •••• | •••• | •••• | •••• | •••• |
| Trade Receivables | •••• | •••• | •••• | •••• | •••• |
| Cash and Bank Balance | •••• | •••• | •••• | •••• | •••• |
| Total Assets | •••• | •••• | •••• | •••• | •••• |
Financial Ratios of Ceido Tooling Private Limited
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 28.8% | •••• | •••• | •••• | •••• |
| Net Profit Margin | 7.2% | •••• | •••• | •••• | •••• |
| Return on Equity (ROE) | •••• | •••• | •••• | •••• | •••• |
| Return on Capital Employed (ROCE) | •••• | •••• | •••• | •••• | •••• |
| Return on Assets (ROA) | •••• | •••• | •••• | •••• | •••• |
| Liquidity and Debt | |||||
| Current Ratio | •••• | •••• | •••• | •••• | •••• |
| Quick Ratio | •••• | •••• | •••• | •••• | •••• |
| Debt-to-Equity Ratio | •••• | •••• | •••• | •••• | •••• |
| Interest Coverage Ratio | •••• | •••• | •••• | •••• | •••• |
| Efficiency and Growth | |||||
| Asset Turnover | •••• | •••• | •••• | •••• | •••• |
| Receivable Days | •••• | •••• | •••• | •••• | •••• |
| Payable Days | •••• | •••• | •••• | •••• | •••• |
| Inventory Days | •••• | •••• | •••• | •••• | •••• |
| Revenue Growth | •••• | •••• | •••• | •••• | •••• |
| Net Profit Growth | •••• | •••• | •••• | •••• | •••• |
Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Ceido Tooling are in the company report.
Premium access
Financial statements from FY 2020
Earlier years and trend charts are in the company report.
- Income statements
- Balance sheets
- Cash-flow statements
- Ratios and benchmarks
Verified entity values are shown only after access is granted.
Board of Directors of Ceido Tooling Private Limited
Ceido Tooling has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Annu Yadav | Director | 13 Dec 2019 | 6 Years 10 Months | Current |
| Jitender Kumar Also directs: Sterilis Medicare LLP, Ceido Casting Private Limited | Director | 13 Dec 2019 | 6 Years 10 Months | Current |
Peer Comparison of Ceido Tooling Private Limited
Ceido Tooling Private Limited is compared with the companies closest to it by revenue in the Engineering industry (Components Retail and Distribution). Net profit, margin and employee counts of each company are in the company report.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Kothari Equipments Pvt. Ltd. | ₹2.17 Cr (FY 2024) | •••• | •••• | 89.0% | •••• | Kolkata, West Bengal, India |
| Unique Intertrade Private Limited | ₹2.16 Cr (FY 2025) | •••• | •••• | -23.0% | •••• | Ahmedabad, Gujarat, India |
| Sanita Products Private Limited | ₹2.16 Cr (FY 2025) | •••• | •••• | 878.0% | •••• | Delhi, India |
| Vittrak Distributors Private Limited | ₹2.11 Cr (FY 2025) | •••• | •••• | 3.0% | •••• | Vadodara, Gujarat, India |
| JSK Engg. Private Limited | ₹2.09 Cr (FY 2024) | •••• | •••• | 46.0% | •••• | Mumbai, Maharashtra, India |
| Ceido Tooling Private Limited this company | ₹2.08 Cr (FY 2024) | •••• | •••• | -5.0% | •••• | Rewari, Haryana, India |
| Its Tooling Private Limited | ₹2.08 Cr (FY 2017) | •••• | •••• | -12.0% | •••• | Chennai, Tamil Nadu, India |
| New Tractor Parts Private Limited | ₹2.08 Cr (FY 2025) | •••• | •••• | -40.0% | •••• | Pune, Maharashtra, India |
| Tooltech India Priuvate Limited | ₹2.07 Cr (FY 2024) | •••• | •••• | 7.0% | •••• | New Delhi, Delhi, India |
| Elero Motors and Controls Private Limited | ₹2.07 Cr (FY 2022) | •••• | •••• | 18.0% | •••• | New Delhi, Delhi, India |
| Maruti Needle Bearings Private Limited | ₹2.04 Cr (FY 2024) | •••• | •••• | -37.0% | •••• | Mumbai, Maharashtra, India |
Peers are the five companies nearest above and the five nearest below Ceido Tooling by revenue in the Engineering industry (Components Retail and Distribution), from the latest filed financials of each company. Net profit, margin and employee counts of each peer are in the company report.
Auditor Details of Ceido Tooling Private Limited
Ceido Tooling Private Limited is audited by JEETENDAR GUPTA & CO for the financial year 2022.
| Name | Status | Appointment Date | Cessation Date |
|---|---|---|---|
| JEETENDAR GUPTA & CO | Locked | Locked | Locked |
Premium access
Complete auditor history
Appointment and cessation dates and past auditor changes are in the company report.
- Appointment status
- Appointment dates
- Cessation dates
- Auditor changes
Verified entity values are shown only after access is granted.
Ownership and Shareholding of Ceido Tooling Private Limited
Premium access
Shareholding and ownership data
Promoter, institutional, public and beneficial ownership figures are in the company report.
- Ownership categories
- Historical changes
- Group structure
- FII and DII holdings
Verified entity values are shown only after access is granted.
Charges & Borrowings of Ceido Tooling Private Limited
Open charges
₹3.96 Cr
Satisfied charges
None
Breakdown by lending institutions
Latest charge details
| Date | Lender | Amount | Status |
|---|---|---|---|
| 12 May 2025 | Others | ₹17.42 Lakh | Open |
| 26 Jul 2024 | Others | ₹1.26 Cr | Open |
| 05 Sep 2023 | Hdfc Bank Limited | ₹15 Lakh | Open |
| 31 Aug 2023 | Others | ₹1.51 Cr | Open |
| 28 Jul 2021 | Others | ₹49.38 Lakh | Open |
Total charge records: 6 View all charges
Legal Cases of Ceido Tooling Private Limited
Ceido Tooling Private Limited has 2 court cases on record: 2 filed against it. All cases are pending. Status as checked between 01 Oct 2026 and 02 Oct 2026.
Total cases
2
Filed against the company
2
Pending
2
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 2 | 2 | 2 |
Cases on record (2 of 2)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, Mumbai CMM Courts, Maharashtra | Court case (SUMMARY CASE) | Filed against the company by Mahindra and Mahindra Financial Services Limited | Pending |
| District court, Mumbai CMM Courts, Maharashtra | Court case (SUMMARY CASE) | Filed against the company by Mahindra and Mahindra Financial Service Limited | Pending |
Premium access
Full case history
All 2 cases with case numbers, court, year-wise trend, opposite parties and decision dates are in the company report.
- Every case with its case number
- Year-wise trend
- Opposite parties
- Decision dates and orders
Verified entity values are shown only after access is granted.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
Employees and EPFO Compliance at Ceido Tooling Private Limited
Employment history and EPFO contributions of people linked to Ceido Tooling.
Premium access
Employee and EPFO history
Monthly headcount, contribution history and filing status are in the company report.
- Monthly headcount
- PF contributions
- ECR filing status
- Establishment history
Verified entity values are shown only after access is granted.
Recent Activity on Ceido Tooling Private Limited
Ceido Tooling Private Limited has 3 board changes on record since 2019: 2 appointments and 1 cessation. The latest: Manju Bai ceased to be Director on 05 Jan 2023.
AGM
Ceido Tooling Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Charges
A charge with Others amounted to Rs. 17.42 Lakh with Charge ID 101094430 was registered on 12 May 2025.
Filing
Ceido Tooling Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Haryana.
Charges
A charge with Others amounted to Rs. 125.50 Lakh with Charge ID 100952205 was registered on 26 Jul 2024.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 15.00 Lakh with Charge ID 100786027 was registered on 05 Sep 2023.
Charges
A charge with Others amounted to Rs. 151.48 Lakh with Charge ID 100776780 was registered on 31 Aug 2023.
Ceased
Manju Bai ceased to be Director.
Charges
A charge with Others amounted to Rs. 49.38 Lakh with Charge ID 100463565 was registered on 28 Jul 2021.
Charges
A charge with Others amounted to Rs. 37.00 Lakh with Charge ID 100339218 was registered on 13 Feb 2020.
Appointed
Annu Yadav was appointed as Director.
Appointed
Jitender Kumar was appointed as Director.
Incorporation
13 Dec 2019
Ceido Tooling Private Limited was registered on 13 Dec 2019 with Roc Haryana & aged 6 years 10 months as per MCA records.
Credit Ratings, Litigation & Regulatory Alerts for Ceido Tooling Private Limited
Premium access
Credit ratings, litigation, and regulatory alerts
Credit ratings, court records and regulatory alerts are in the company report.
- Rating history
- Court and tribunal cases
- Regulatory alerts
- Director-linked violations
Verified entity values are shown only after access is granted.
MSME Payment Delays by Ceido Tooling Private Limited
Premium access
MSME payment history
Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.
- Outstanding amounts
- Delay periods and reasons
- MSME-1 filing history
- Vendor payment signals
Verified entity values are shown only after access is granted.
Subsidiaries & Group Companies of Ceido Tooling Private Limited
Premium access
Corporate group structure
Parent, subsidiary, associate and joint venture records with holdings are in the company report.
- Parent company
- Subsidiaries and ownership
- Associates and joint ventures
- Entity investments
Verified entity values are shown only after access is granted.
GST Compliance of Ceido Tooling Private Limited
Ceido Tooling has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 06AAICC5244R1Z5 | Haryana | Active | 28 Dec 2019 |
Premium access
GST registrations and filing compliance
State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.
- GSTIN registrations
- State-wise filing status
- HSN and SAC details
- Tax jurisdiction records
Verified entity values are shown only after access is granted.
MCA Filings & Documents of Ceido Tooling Private Limited
Premium access
MCA filings and documents
Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.
- Incorporation documents
- Annual returns and statements
- Charge filings
- Complete filing index
Verified entity values are shown only after access is granted.
Frequently Asked Questions about Ceido Tooling Private Limited
Ceido Tooling is an active private limited company based in Rewari, Haryana, India. The company works in engineering components retail and distribution, within the engineering industry. It was incorporated on 13 December 2019 (7+ years old) and is registered under CIN U28999HR2019PTC084147.
Ceido Tooling reported revenue of ₹2.08 Cr for FY 2024 (down 5% YoY).
Ceido Tooling has 2 current directors:
- Annu Yadav - Director
- Jitender Kumar - Director
Ceido Tooling reported a net profit of ₹15.03 Lakh (net margin 7.2%) and EBITDA of ₹60.02 Lakh (EBITDA margin 28.8%) for FY 2024, as per its filed financial statements.
The compounded annual growth rate (CAGR) of the revenue of Ceido Tooling is 21% over three years. In the latest year (FY 2024) revenue fell 5%. CAGR is the steady yearly rate that links the first and the last year.
The GSTIN of Ceido Tooling is 06AAICC5244R1Z5, registered in Haryana.
The CIN (Corporate Identification Number) of Ceido Tooling is U28999HR2019PTC084147. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Ceido Tooling has 2 court cases on record: 2 filed against it. 2 are pending.
Ceido Tooling was incorporated on 13 December 2019, making it 7+ years old. It is registered with the Registrar of Companies, Haryana.
The peers of Ceido Tooling by revenue are Kothari Equipments Pvt. Ltd, Unique Intertrade Private Limited, Sanita Products Private Limited, Vittrak Distributors Private Limited, JSK Engg. Private Limited and 5 more, all in the Engineering industry (Components Retail and Distribution).
Manju Bai ceased to be Director on 05 Jan 2023. Annu Yadav was appointed as Director on 13 Dec 2019. Jitender Kumar was appointed as Director on 13 Dec 2019.