Essen Plastics Private Limited

Essen Plastics Private Limited - manufacturing in Hyderabad, Telangana, India. FY 2026 financials & compliance.
CIN U74899TG1988PTC130860 Incorporated 03 February 1988 ROC Hyderabad HQ Hyderabad, Telangana, India
Active Private Limited Company manufacturing MSME · Small
Data last updated
Revenue · FY 2024
₹17.21 Cr
▲ 2% YoY
Net profit · FY 2024
₹4.58 Lakh
Net margin 0.3%
EBITDA · FY 2024
₹12.98 Lakh
EBITDA margin 0.8%
Authorised capital
₹20 Lakh
Registered with MCA
Paid-up capital
₹10 Lakh
Issued & subscribed
Open charges
₹17.27 Cr
Satisfied ₹2.17 Cr
Company age
38 yrs
Est. 1988
Directors on board
4
As per MCA filings

About Essen Plastics Private Limited

Data last updated:

Essen Plastics Private Limited is a private limited company based in Hyderabad, Telangana, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 03 February 1988 and has been in existence for over 38 years.

The company is registered with the Registrar of Companies (ROC), Hyderabad, under CIN U74899TG1988PTC130860. Its GSTIN is 36AAACE0581D2Z2 (Telangana). The company holds 4 GST registrations, of which 1 is active.

The company has an authorised share capital of ₹20 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors including Bhaskar Rao Maddipati and Vineeth Kumar Maddipati.

Its last annual general meeting (AGM) was held on 30 September 2024, and its latest financial statements are for the year ended 31 March 2024. The registered office is at Plot No.13 Phase – IV Ida Jeedemetla, Hyderabad, Telangana, India – 500055.

As per the financials filed for FY 2024, the company reported a revenue of ₹17.21 Cr, a growth of 2% compared to the previous year. For the same year it recorded a net profit of ₹4.58 Lakh (net margin 0.3%) and EBITDA of ₹12.98 Lakh (EBITDA margin 0.8%). Revenue has grown at a compounded annual rate (CAGR) of 425% over three years and 161% over five years.

As per MCA filings, the company has open charges of ₹17.27 Cr and satisfied charges of ₹2.17 Cr on record.

Essen Plastics Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-TS-20-0028181). The current compliance status is marked as compliant by the Registrar of Companies.

Company details

CIN U74899TG1988PTC130860
Registration Number 130860
Incorporation Date 03 February 1988
ROC Hyderabad
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2024
Date of Balance Sheet 31 March 2024
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-TS-20-0028181

CIN history

Essen Plastics has one previous CIN (Corporate Identification Number): U74899DL1988PTC030489. The current CIN is U74899TG1988PTC130860, which is the unique identifier assigned by the Registrar of Companies.

CINStatus
U74899TG1988PTC130860Current
U74899DL1988PTC030489Previous
Key People
Bhaskar Rao Maddipati Director Vineeth Kumar Maddipati Director Ratan Kumar Maddipati Director

Recognitions & Rankings of Essen Plastics

MSME (Udyam registered) Ministry of MSME
Category
Small (2023-24)
Udyam number
UDYAM-TS-20-0028181

Contact details

Essen Plastics Private Limited's registered office is in Hyderabad, Telangana. Its e-mail address and telephone number are in the company report.

  • Email
  • Telephone
  • Registered Address
    Plot No.13 Phase – IV Ida Jeedemetla, Hyderabad, Telangana, India – 500055
  • Industry
    Manufacturing, Plastic-Based Products

To see the full contact details of Essen Plastics Private Limited, buy the company report.

Comprehensive company report
Essen Plastics Private Limited - one report that includes everything
  • Company details, directors and signatories
  • Historical financials and ratios
  • Shareholding pattern and group structure
  • Charges with holder and property details
  • Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included

Business activity

The main business activities of Essen Plastics are trade and real estate. In detail, this covers wholesale trading and real estate activities with own or leased property. 2 activity segments are registered with the MCA.

Main activity group codeMain activityBusiness activity codeBusiness activityShare of turnover
GTradeG1Wholesale Trading
LReal EstateL1Real estate activities with own or leased property

To see the full business activity and turnover split of Essen Plastics Private Limited, buy the company report.

Financials of Essen Plastics Private Limited

FY 2024 filings available

Essen Plastics Private Limited reported revenue of ₹17.21 Cr (up 2% YoY) for FY 2024.

Revenue · FY 2024
₹17.21 Cr ▲ 2%
Net profit · FY 2024
₹4.58 Lakh margin 0.3%
EBITDA · FY 2024
₹12.98 Lakh margin 0.8%

Compounded Annual Growth Rate (CAGR)

Revenue CAGR growth
1 year
▲ 2%
3 years · compounded
▲ 425%
5 years · compounded
▲ 161%
EBITDA CAGR growth
1 year
▼ 62%
3 years · compounded
▲ 22%
5 years · compounded
▲ 54%

Revenue has grown at a compounded annual rate (CAGR) of 161% over five years, including 2% growth in the latest year. EBITDA fell 62% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.

Financial Statement Summary

MetricsFY 2023-24FY 2022-23FY 2021-22FY 2020-21FY 2019-20
Profit and Loss Statement
Revenue from Operations
Other Income
Total Revenue
Cost of Materials Consumed
Employee Benefit Expense
Finance Costs
Depreciation and Amortisation
Other Expenses
Total Expenses
EBITDA₹12.98 Lakh
Profit Before Tax
Tax Expense
Net Profit (PAT)₹4.58 Lakh
Balance Sheet
Share Capital
Reserves and Surplus
Net Worth (Total Equity)
Long-term Borrowings
Short-term Borrowings
Trade Payables
Total Liabilities
Fixed Assets
Investments
Inventories
Trade Receivables
Cash and Bank Balance
Total Assets

Financial Ratios

MetricsFY 2023-24FY 2022-23FY 2021-22FY 2020-21FY 2019-20
Profitability
EBITDA Margin0.8%
Net Profit Margin0.3%
Return on Equity (ROE)
Return on Capital Employed (ROCE)
Return on Assets (ROA)
Liquidity and Debt
Current Ratio
Quick Ratio
Debt-to-Equity Ratio
Interest Coverage Ratio
Efficiency and Growth
Asset Turnover
Receivable Days
Payable Days
Inventory Days
Revenue Growth
Net Profit Growth

To see the full financial statements and ratios of Essen Plastics Private Limited, buy the company report.

Board of directors of Essen Plastics Private Limited

Essen Plastics has 4 current directors and 2 former directors. Current directors are listed first, with their designation and appointment date.

Current Directors
NameDesignationAppointment DateTenureStatus
Bhaskar Rao Maddipati
Also directs: Centaur Techplast Private Limited, Centaur Holdings Private Limited
Director06 Mar 20188 Years 7 MonthsCurrent
Vineeth Kumar Maddipati
Also directs: Centaur Techplast Private Limited, Centaur Holdings Private Limited
Director06 Mar 20188 Years 7 MonthsCurrent
Ratan Kumar Maddipati
Also directs: Centaur Techplast Private Limited, Centaur Holdings Private Limited
Director06 Mar 20188 Years 7 MonthsCurrent
Suseela Maddipati
Also directs: Centaur Techplast Private Limited, Centaur Holdings Private Limited
Director06 Mar 20188 Years 7 MonthsCurrent
View all directors

Auditor

Essen Plastics Private Limited is audited by G.P.Rao & Associates for the financial year 2023.

Auditor firmFinancial yearFirm registration number
G.P.Rao & AssociatesFY 2023203034

Shareholding

The shareholding of Essen Plastics Private Limited is on record for 5 financial years, the latest being FY 2022, split between promoters, domestic institutions, foreign institutions, public shareholders and others.

Shareholder categoryFY 2022FY 2021FY 2020FY 2019FY 2018
Promoters
Domestic institutional investors (DII)
Foreign institutional investors (FII)
Public
Others

To see the full shareholding pattern of Essen Plastics Private Limited, buy the company report.

Charges & borrowings

Open charges
₹17.27 Cr
Satisfied charges
₹2.17 Cr
Breakdown by lending institutions
Standard Chartered Bank₹17.00 Cr
Hdfc Bank Limited₹0.27 Cr
Latest charge details
DateCharge IDLenderAmountStatusModified or satisfied on
31 Mar 2023100703339Hdfc Bank Limited₹26.64 LakhOpen
28 Dec 2018100226569Standard Chartered Bank₹17 CrOpen
10 May 200810104316Bank of India₹19.5 LakhSatisfied
27 Aug 200190036721Bank of India₹30.75 LakhSatisfied
04 Mar 200090035728Bank of India₹3 LakhSatisfied

To see the full charge records of Essen Plastics Private Limited, buy the company report.

Total charge records: 13 View all charges

MSME payment delays

No delayed payments to MSME suppliers are on our record for Essen Plastics Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.

Employees & EPFO

Essen Plastics Private Limited has 1 active EPFO establishment as of Apr 07, 2024.

Active EPFO establishments
1

GST

Essen Plastics has 4 GST registrations: 1 active and 3 cancelled or inactive.

Total GSTINs
4
Active
1
Cancelled / inactive
3
GSTINStateStatusRegistered on
36AAACE0581D2Z2TelanganaActive10 May 2018

To see the full GST registrations and return filing status of Essen Plastics Private Limited, buy the company report.

Recent activity

Essen Plastics Private Limited has 6 board changes on record since 2018: 4 appointments and 2 cessations. The latest: Sanjay Kumar Nayer ceased to be Managing Director on 20 May 2019.

Charges
A charge with Standard Chartered Bank of Rs. 1,700.00 Lakh registered on 28 Dec 2018 with Charge ID 100226569 was modified on 04 Feb 2025.
AGM
Essen Plastics Private Limited last Annual general meeting of members was held on 30 Sep 2024 as per latest MCA records.
Filing
Essen Plastics Private Limited has filed its annual Financial statements for the year ended 31 Mar 2024 with Roc Hyderabad.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 26.64 Lakh with Charge ID 100703339 was registered on 31 Mar 2023.
Ceased
Sanjay Kumar Nayer ceased to be Managing Director.
Charges
A charge with Standard Chartered Bank amounted to Rs. 1,700.00 Lakh with Charge ID 100226569 was registered on 28 Dec 2018.
Ceased
Nandini Nayer ceased to be Director.
Appointed
Bhaskar Rao Maddipati was appointed as Director.
Appointed
Ratan Kumar Maddipati was appointed as Director.
Appointed
Suseela Maddipati was appointed as Director.
Appointed
Vineeth Kumar Maddipati was appointed as Director.
Charges
A charge registered on 12 May 1997 via Charge ID 90034120 with Bank Of India was fully satisfied on 24 May 2016.

26 earlier events are in the company report.

Frequently asked questions

Essen Plastics is an active private limited company based in Hyderabad, Telangana, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 03 February 1988 (38+ years old) and is registered under CIN U74899TG1988PTC130860.

Essen Plastics has 4 current directors:

The latest financial statements of Essen Plastics on record with the MCA are for the year ended 31 March 2024. Its last annual general meeting was held on 30 September 2024. Year-wise statements from 2015 are in the company report.

The GSTIN of Essen Plastics is 36AAACE0581D2Z2, registered in Telangana. The company has 4 GST registrations in all, of which 1 is active and 3 are cancelled or inactive.

The CIN (Corporate Identification Number) of Essen Plastics is U74899TG1988PTC130860. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.

Essen Plastics was incorporated on 03 February 1988, making it 38+ years old. It is registered with the Registrar of Companies, Hyderabad.

Sanjay Kumar Nayer ceased to be Managing Director on 20 May 2019. Nandini Nayer ceased to be Director on 22 Aug 2018. Bhaskar Rao Maddipati was appointed as Director on 06 Mar 2018. Essen Plastics has 6 board changes on record in total.

Yes, Essen Plastics is registered as a small enterprise under Udyam registration (number: UDYAM-TS-20-0028181).

The registered office of Essen Plastics is at Plot No.13 Phase – IV Ida Jeedemetla, Hyderabad, Telangana, India – 500055.

Essen Plastics operates in the manufacturing industry, in the plastic-based products segment.