G3 Fabrication and Engineering Private Limited
About G3 Fabrication and Engineering Private Limited
Data last updated:
G3 Fabrication and Engineering Private Limited is a private limited company based in Surat, Gujarat, India. It operates in the metal foundry and fabrication services segment of the engineering sector. It was incorporated on 27 October 2009 and has been in existence for over 17 years.
The company is registered with the Registrar of Companies (ROC), Ahmedabad, under CIN U28900GJ2009PTC058444. The company has 2 GST registrations on record, none of which is active.
The company has an authorised share capital of ₹1.55 Cr and a paid-up capital of ₹1.45 Cr. It is led by directors Sureshbhai Lallubhai Kotadia and Mukeshkumar Lallubhai Kotadiya.
Its last annual general meeting (AGM) was held on 30 September 2018, and its latest financial statements are for the year ended 31 March 2018. The registered office is at Plot No : A – 41 G.I.D.C Ichhapore Near Sub Station Hazira, Surat, Gujarat, India – 394270.
As per the financials filed for FY 2018, the company reported a revenue of ₹61,927, a decline of 57% compared to the previous year. For the same year it recorded a net loss of ₹1.79 Cr and EBITDA of -₹7.72 Lakh. Revenue has declined at a compounded annual rate (CAGR) of 86% over three years.
As per MCA filings, the company has satisfied charges of ₹19.5 Cr on record. The company has 7 deals on record (5 funding rounds, 2 secondary share transfers), with disclosed funding of ₹6.21 Cr; the latest was in September 2014. Its 10 peer companies in the Engineering industry (Foundry and Fabrication) are compared by revenue, 5 larger and 5 smaller; the largest is M and T Engineers Private Limited with revenue of ₹69,991.
The current compliance status is marked as compliant by the Registrar of Companies.
Company details
Contact details
G3 Fabrication and Engineering Private Limited's registered office is in Surat, Gujarat. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressPlot No : A – 41 G.I.D.C Ichhapore Near Sub Station Hazira, Surat, Gujarat, India – 394270
- IndustryEngineering, Metal Foundry & Fabrication Services
To see the full contact details of G3 Fabrication and Engineering Private Limited, buy the company report.
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
Financials of G3 Fabrication and Engineering Private Limited
FY 2018 filings availableG3 Fabrication and Engineering Private Limited reported revenue of ₹61,927 (down 57% YoY) for FY 2018.
Compounded Annual Growth Rate (CAGR)
Revenue has declined at a compounded annual rate (CAGR) of 86% over three years, including a 57% fall in the latest year. EBITDA rose 86% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2017-18 | FY 2016-17 | FY 2015-16 | FY 2014-15 |
|---|---|---|---|---|
| Profit and Loss Statement | ||||
| Revenue from Operations | ||||
| Other Income | ||||
| Total Revenue | ₹61,927 | |||
| Cost of Materials Consumed | ||||
| Employee Benefit Expense | ||||
| Finance Costs | ||||
| Depreciation and Amortisation | ||||
| Other Expenses | ||||
| Total Expenses | ||||
| EBITDA | -₹7.72 Lakh | |||
| Profit Before Tax | ||||
| Tax Expense | ||||
| Net Profit (PAT) | -₹1.79 Cr | |||
| Balance Sheet | ||||
| Share Capital | ||||
| Reserves and Surplus | ||||
| Net Worth (Total Equity) | ||||
| Long-term Borrowings | ||||
| Short-term Borrowings | ||||
| Trade Payables | ||||
| Total Liabilities | ||||
| Fixed Assets | ||||
| Investments | ||||
| Inventories | ||||
| Trade Receivables | ||||
| Cash and Bank Balance | ||||
| Total Assets | ||||
Financial Ratios
| Metrics | FY 2017-18 | FY 2016-17 | FY 2015-16 | FY 2014-15 |
|---|---|---|---|---|
| Profitability | ||||
| EBITDA Margin | ||||
| Net Profit Margin | ||||
| Return on Equity (ROE) | ||||
| Return on Capital Employed (ROCE) | ||||
| Return on Assets (ROA) | ||||
| Liquidity and Debt | ||||
| Current Ratio | ||||
| Quick Ratio | ||||
| Debt-to-Equity Ratio | ||||
| Interest Coverage Ratio | ||||
| Efficiency and Growth | ||||
| Asset Turnover | ||||
| Receivable Days | ||||
| Payable Days | ||||
| Inventory Days | ||||
| Revenue Growth | ||||
| Net Profit Growth | ||||
To see the full financial statements and ratios of G3 Fabrication and Engineering Private Limited, buy the company report.
Board of directors of G3 Fabrication and Engineering Private Limited
G3 Fabrication and Engineering has 2 current directors and 4 former directors. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Mukeshkumar Lallubhai Kotadiya | Additional Director | 07 Sep 2020 | 6 Years 2 Months | Current |
| Sureshbhai Lallubhai Kotadia | Director | 30 Apr 2010 | 16 Years 6 Months | Current |
Peer comparison
G3 Fabrication and Engineering Private Limited is compared with the 10 companies closest to it by revenue in the Engineering industry (Foundry and Fabrication), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| M and T Engineers Private Limited | ₹69,991 (FY 2025) | -45.0% | New Delhi, Delhi, India | |||
| Mechvision Solutions Private Limited | ₹68,510 (FY 2025) | Pune, Maharashtra, India | ||||
| Mesco Construction Private Limited | ₹67,233 (FY 2025) | 523.0% | Patna, Bihar, India | |||
| Goel Fabricators Private Limited | ₹65,410 (FY 2024) | -4.0% | Gamharia, Jharkhand, India | |||
| Geosteel Metaliks Private Limited | ₹61,929 (FY 2024) | -60.0% | New Delhi, Delhi, India | |||
| G3 Fabrication and Engineering Private Limitedthis company | ₹61,927 (FY 2018) | -₹1.79 Cr | -57.0% | Surat, Gujarat, India | ||
| Claysys Prefab Private Limited | ₹61,506 (FY 2025) | Kunnathunad, Kerala, India | ||||
| Rohan Steel Structural Private Limited | ₹60,000 (FY 2025) | New Delhi, Delhi, India | ||||
| Shrachi Monofilament & Fabrics Private Limited | ₹59,845 (FY 2024) | 15.0% | Kolkata, West Bengal, India | |||
| Metfin Electrochem Private Limited | ₹57,638 (FY 2018) | -92.0% | Nashik, Maharashtra, India | |||
| C S Engineering India Private Limited | ₹55,873 (FY 2025) | 5.0% | Nagpur, Maharashtra, India |
To see the full peer comparison of G3 Fabrication and Engineering Private Limited, buy the company report.
Auditor
G3 Fabrication and Engineering Private Limited is audited by A G K R AND CO for the financial year 2018.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| A G K R AND CO | FY 2018 | 004740C |
Shareholding
The shareholding of G3 Fabrication and Engineering Private Limited is on record for 4 financial years, the latest being FY 2018, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2018 | FY 2017 | FY 2016 | FY 2015 |
|---|---|---|---|---|
| Promoters | ||||
| Domestic institutional investors (DII) | ||||
| Foreign institutional investors (FII) | ||||
| Public | ||||
| Others |
To see the full shareholding pattern of G3 Fabrication and Engineering Private Limited, buy the company report.
Charges & borrowings
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 24 Mar 2011 | 10275664 | State Bank of India | ₹9.75 Cr | Satisfied | |
| 30 Nov 2010 | 10253701 | State Bank of India | ₹9.75 Cr | Satisfied |
To see the full charge records of G3 Fabrication and Engineering Private Limited, buy the company report.
Total charge records: 2 View all charges
Deals & funding
G3 Fabrication and Engineering Private Limited has 7 deals on record (5 funding rounds, 2 secondary share transfers), with disclosed funding of ₹6.21 Cr; the latest was in September 2014.
Deals on record (5 of 7)
| When | Deal | Amount | Parties |
|---|---|---|---|
| Sep 2014 | Funding round | ₹1.85 Cr | Investors: 3 individuals |
| Mar 2012 | Funding round | ₹1.46 Cr | Investors: 2 individuals |
| Mar 2012 | Secondary share transfer | Undisclosed | Buyer: 2 individuals Seller: 2 individuals |
| Mar 2012 | Funding round | ₹1.28 Cr | Investors: an individual |
| Mar 2012 | Funding round | ₹31.6 Lakh | Investors: 2 individuals |
To see the full deal history of G3 Fabrication and Engineering Private Limited, buy the company report.
Deal records are compiled from filings and public sources; amounts are shown only where the source reported them.
Legal cases
No court or tribunal cases involving G3 Fabrication and Engineering Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for G3 Fabrication and Engineering Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
G3 Fabrication and Engineering has 2 GST registrations on record, and all of them have been cancelled or are inactive. Only active GST numbers are listed on this page.
To see the full GST registrations and return filing status of G3 Fabrication and Engineering Private Limited, buy the company report.
Recent activity
G3 Fabrication and Engineering Private Limited has 6 board changes on record since 2010: 2 appointments and 4 cessations. The latest: Mukeshkumar Lallubhai Kotadiya was appointed as Additional Director on 07 Sep 2020.
3 earlier events are in the company report.
Frequently asked questions
G3 Fabrication and Engineering is an active private limited company based in Surat, Gujarat, India. The company works in metal foundry and fabrication services, within the engineering industry. It was incorporated on 27 October 2009 (17+ years old) and is registered under CIN U28900GJ2009PTC058444.
G3 Fabrication and Engineering has 2 current directors:
- Mukeshkumar Lallubhai Kotadiya - Additional Director
- Sureshbhai Lallubhai Kotadia - Director
The latest financial statements of G3 Fabrication and Engineering on record with the MCA are for the year ended 31 March 2018. Its last annual general meeting was held on 30 September 2018. Year-wise statements from 2015 are in the company report.
No. G3 Fabrication and Engineering has 2 GST registrations on record and all of them are cancelled or inactive.
The CIN (Corporate Identification Number) of G3 Fabrication and Engineering is U28900GJ2009PTC058444. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
G3 Fabrication and Engineering was incorporated on 27 October 2009, making it 17+ years old. It is registered with the Registrar of Companies, Ahmedabad.
G3 Fabrication and Engineering has 7 deals on record (5 funding rounds, 2 secondary share transfers), with disclosed funding of ₹6.21 Cr; the latest was in September 2014.
The peers of G3 Fabrication and Engineering by revenue are M and T Engineers Private Limited, Mechvision Solutions Private Limited, Mesco Construction Private Limited, Goel Fabricators Private Limited, Geosteel Metaliks Private Limited and 5 more, all in the Engineering industry (Foundry and Fabrication).
Mukeshkumar Lallubhai Kotadiya was appointed as Additional Director on 07 Sep 2020. Raju Thoppil Mathai ceased to be Director on 07 Sep 2020. Sureshkumar Balkrushna Bhatt ceased to be Managing Director on 07 Sep 2020. G3 Fabrication and Engineering has 6 board changes on record in total.
The registered office of G3 Fabrication and Engineering is at Plot No : A – 41 G.I.D.C Ichhapore Near Sub Station Hazira, Surat, Gujarat, India – 394270.
G3 Fabrication and Engineering operates in the engineering industry, in the metal foundry and fabrication services segment.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
