Good Luck Moulding Private Limited
About Good Luck Moulding Private Limited
Data last updated:
Good Luck Moulding Private Limited was a private limited company based in New Delhi, Delhi, India. The company has been struck off by the Registrar of Companies, typically due to non-filing of annual returns or failure to commence business. It is no longer operational and cannot enter into any legal contracts or agreements. It operated in the fabricated metal products segment of the plastics and polymers sector. It was incorporated on 15 November 2012.
The company was registered with the Registrar of Companies (ROC), Delhi, under CIN U25190DL2012PTC244877. The company has 1 GST registration on record, which is no longer active.
The company had an authorised share capital of ₹1 Lakh and a paid-up capital of ₹1 Lakh. It was led by directors Ranjeet Kumar and Niraj Kumar.
Its last annual general meeting (AGM) was held on 29 September 2018, and its latest financial statements are for the year ended 31 March 2018. The registered office was at 23C Packet 12 Lig Dda Flat Jasola Vihar, New Delhi, Delhi, India – 110025.
As per the financials filed for FY 2018, the company reported a revenue of ₹1.97 Lakh, reflecting significant growth compared to the previous year. For the same year it recorded a net profit of ₹8,250 (net margin 4.2%) and EBITDA of ₹11,150 (EBITDA margin 5.7%). Revenue has declined at a compounded annual rate (CAGR) of 6% over three years.
Company details
Contact details
Good Luck Moulding Private Limited's registered office is in New Delhi, Delhi. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered Address23C Packet 12 Lig Dda Flat Jasola Vihar, New Delhi, Delhi, India – 110025
- IndustryPlastics, Fabricated Metal Products, Plastic Products, Rubber Products, Non-Metallic Mineral Products
To see the full contact details of Good Luck Moulding Private Limited, buy the company report.
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
Business activity
The main business activity of Good Luck Moulding is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Good Luck Moulding Private Limited, buy the company report.
Financials of Good Luck Moulding Private Limited
FY 2018 filings availableGood Luck Moulding Private Limited reported revenue of ₹1.97 Lakh (up 338% YoY) for FY 2018.
Compounded Annual Growth Rate (CAGR)
Revenue rose 338% in the latest year, though over three years it has declined at a compounded annual rate (CAGR) of 6%. EBITDA fell 43% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2017-18 | FY 2016-17 | FY 2015-16 | FY 2014-15 |
|---|---|---|---|---|
| Profit and Loss Statement | ||||
| Revenue from Operations | ||||
| Other Income | ||||
| Total Revenue | ||||
| Cost of Materials Consumed | ||||
| Employee Benefit Expense | ||||
| Finance Costs | ||||
| Depreciation and Amortisation | ||||
| Other Expenses | ||||
| Total Expenses | ||||
| EBITDA | ₹11,150 | |||
| Profit Before Tax | ||||
| Tax Expense | ||||
| Net Profit (PAT) | ₹8,250 | |||
| Balance Sheet | ||||
| Share Capital | ||||
| Reserves and Surplus | ||||
| Net Worth (Total Equity) | ||||
| Long-term Borrowings | ||||
| Short-term Borrowings | ||||
| Trade Payables | ||||
| Total Liabilities | ||||
| Fixed Assets | ||||
| Investments | ||||
| Inventories | ||||
| Trade Receivables | ||||
| Cash and Bank Balance | ||||
| Total Assets | ||||
Financial Ratios
| Metrics | FY 2017-18 | FY 2016-17 | FY 2015-16 | FY 2014-15 |
|---|---|---|---|---|
| Profitability | ||||
| EBITDA Margin | 5.7% | |||
| Net Profit Margin | 4.2% | |||
| Return on Equity (ROE) | ||||
| Return on Capital Employed (ROCE) | ||||
| Return on Assets (ROA) | ||||
| Liquidity and Debt | ||||
| Current Ratio | ||||
| Quick Ratio | ||||
| Debt-to-Equity Ratio | ||||
| Interest Coverage Ratio | ||||
| Efficiency and Growth | ||||
| Asset Turnover | ||||
| Receivable Days | ||||
| Payable Days | ||||
| Inventory Days | ||||
| Revenue Growth | ||||
| Net Profit Growth | ||||
To see the full financial statements and ratios of Good Luck Moulding Private Limited, buy the company report.
Board of directors of Good Luck Moulding Private Limited
Good Luck Moulding has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Ranjeet Kumar | Director | 15 Nov 2012 | 13 Years 11 Months | As last reported |
| Niraj Kumar Also directs: Sunsar Logistics Private Limited | Director | 15 Nov 2012 | 13 Years 11 Months | As last reported |
Peer comparison
Good Luck Moulding Private Limited is compared with the 10 companies closest to it by revenue in the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Vishakha Mouldings Private Limited | ₹2.08 Lakh (FY 2025) | -99.0% | Ahmedabad, Gujarat, India | |||
| Shellios Technolabs Private Limited | ₹2.04 Lakh (FY 2024) | -75.0% | Delhi, India | |||
| Rukmani Stones Private Limited | ₹2.02 Lakh (FY 2025) | -5.0% | Kota, Rajasthan, India | |||
| Bangur Cement Limited | ₹2.01 Lakh (FY 2025) | 5.0% | Jaipur, Rajasthan, India | |||
| Indoplast Products India Private Limited | ₹2 Lakh (FY 2025) | 16.0% | New Delhi, Delhi, India | |||
| Good Luck Moulding Private Limitedthis company | ₹1.97 Lakh (FY 2018) | ₹8,250 | 4.2% | 338.0% | New Delhi, Delhi, India | |
| Itamax Ceramic Private Limited | ₹1.95 Lakh (FY 2025) | -99.0% | Bela Rangpar, Gujarat, India | |||
| Alshifa Construction Private Limited | ₹1.95 Lakh (FY 2025) | -97.0% | Delhi, India | |||
| Dr Packaging Private Limited | ₹1.92 Lakh (FY 2023) | New Delhi, Delhi, India | ||||
| Tarsen Polyfab Private Limited | ₹1.92 Lakh (FY 2021) | -98.0% | New Delhi, Delhi, India | |||
| Preto Tech Private Limited | ₹1.91 Lakh (FY 2023) | -96.0% | Madurai, Tamil Nadu, India |
To see the full peer comparison of Good Luck Moulding Private Limited, buy the company report.
Auditor
Good Luck Moulding Private Limited is audited by SATYENDRA THAKUR & ASSOCIATES for the financial year 2017.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| SATYENDRA THAKUR & ASSOCIATES | FY 2017 | 407736 |
Shareholding
The shareholding of Good Luck Moulding Private Limited is on record for 3 financial years, the latest being FY 2017, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2017 | FY 2016 | FY 2015 |
|---|---|---|---|
| Promoters | |||
| Domestic institutional investors (DII) | |||
| Foreign institutional investors (FII) | |||
| Public | |||
| Others |
To see the full shareholding pattern of Good Luck Moulding Private Limited, buy the company report.
Legal cases
No court or tribunal cases involving Good Luck Moulding Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Good Luck Moulding Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
Good Luck Moulding has 1 GST registration on record, and it has been cancelled or is inactive. Only active GST numbers are listed on this page.
To see the full GST registrations and return filing status of Good Luck Moulding Private Limited, buy the company report.
Recent activity
Good Luck Moulding Private Limited has 2 board changes on record since 2012: 2 appointments. The latest: Niraj Kumar was appointed as Director on 15 Nov 2012.
Frequently asked questions
Good Luck Moulding has a status of "Struck Off" as per MCA records. This means the company has been officially removed from the Register of Companies, typically due to non-filing of annual returns or failure to commence business within one year of incorporation. A struck-off company cannot enter into any legal contracts or agreements, and any dealings with such an entity carry significant legal and financial risk.
Good Luck Moulding was a private limited company based in New Delhi, Delhi, India. The company worked in fabricated metal products, within the plastics industry. It was incorporated on 15 November 2012 and is registered under CIN U25190DL2012PTC244877. The company has been struck off by the Registrar of Companies and is no longer operational.
Good Luck Moulding had 2 directors:
- Ranjeet Kumar - Director
- Niraj Kumar - Director
The CIN (Corporate Identification Number) of Good Luck Moulding is U25190DL2012PTC244877. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
The registered office of Good Luck Moulding is at 23C Packet 12 Lig Dda Flat Jasola Vihar, New Delhi, Delhi, India – 110025.
Good Luck Moulding was incorporated on 15 November 2012. It is registered with the Registrar of Companies, Delhi.
The latest financial statements of Good Luck Moulding on record with the MCA are for the year ended 31 March 2018. Its last annual general meeting was held on 29 September 2018. Year-wise statements from 2015 are in the company report.
No. Good Luck Moulding has 1 GST registration on record and it is cancelled or inactive.
Good Luck Moulding operated in the plastics industry, in the fabricated metal products segment. It worked in this industry before it was struck off.
The peers of Good Luck Moulding by revenue are Vishakha Mouldings Private Limited, Shellios Technolabs Private Limited, Rukmani Stones Private Limited, Bangur Cement Limited, Indoplast Products India Private Limited and 5 more, all in the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Niraj Kumar was appointed as Director on 15 Nov 2012. Ranjeet Kumar was appointed as Director on 15 Nov 2012.