MSME (Udyam registered) Ministry of MSME
- Category
- Medium (2024-25)
- Udyam number
- UDYAM-KR-03-0109386
Hi-Tech Blow Moulders Private Limited
Hi-Tech Blow Moulders Private Limited - manufacturing in Bangalore, Karnataka, India. FY 2026 financials & compliance.
Revenue · FY 2025
₹47.04 Cr
▼ 20% YoY
Net profit · FY 2025
₹1.87 Cr
Net margin 4%
EBITDA · FY 2025
₹3.35 Cr
EBITDA margin 7.1%
Authorised capital
₹50 Lakh
Registered with MCA
Paid-up capital
₹29.93 Lakh
Issued & subscribed
Open charges
₹13 Cr
Satisfied ₹54.7 Cr
Company age
32 yrs
Est. 1994
Directors on board
2
As per MCA filings
About Hi-Tech Blow Moulders Private Limited
Data last updated:
Hi-Tech Blow Moulders Private Limited is a private limited company based in Bangalore, Karnataka, India. It operates in the rubber-based products segment of the manufacturing sector. It was incorporated on 03 March 1994 and has been in existence for over 32 years.
The company is registered with the Registrar of Companies (ROC), Bangalore, under CIN U29246KA1994PTC015306. Its GSTIN is 29AAACH4260Q1Z4 (Karnataka).
The company has an authorised share capital of ₹50 Lakh and a paid-up capital of ₹29.93 Lakh. It is led by directors Sandeep Goutham Sethiya (Managing Director) and Saroj Sethiya.
Its last annual general meeting (AGM) was held on 30 September 2024, and its latest financial statements are for the year ended 31 March 2024. The registered office is at Sy No.75 Solur Village Anekal Taluk Bangalore., Karnataka, India.
As per the financials filed for FY 2025, the company reported a revenue of ₹47.04 Cr, a decline of 20% compared to the previous year. For the same year it recorded a net profit of ₹1.87 Cr (net margin 4%) and EBITDA of ₹3.35 Cr (EBITDA margin 7.1%). Revenue has grown at a compounded annual rate (CAGR) of 2% over three years and 7% over five years.
As per MCA filings, the company has open charges of ₹13 Cr and satisfied charges of ₹54.7 Cr on record. Court records list 2 cases involving the company, including 1 filed by the company and 1 filed against it; 1 case is pending.
Hi-Tech Blow Moulders Private Limited is registered as a medium enterprise under the Udyam registration framework (Reg. No. UDYAM-KR-03-0109386). The current compliance status is marked as compliant by the Registrar of Companies.
Company details
CIN U29246KA1994PTC015306
Registration Number 015306
Incorporation Date 03 March 1994
ROC Bangalore
Listing Status Unlisted
Company Status Active
Compliance Status Active Compliant
MSME Classification Medium
Udyam Registration UDYAM-KR-03-0109386
Recognitions & Rankings of Hi-Tech Blow Moulders
Contact details
Hi-Tech Blow Moulders Private Limited's registered office is in Bangalore, Karnataka. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressSy No.75 Solur Village Anekal Taluk Bangalore., Karnataka, India
- IndustryManufacturing, Rubber-Based Products, Plastic-Based Products
To see the full contact details of Hi-Tech Blow Moulders Private Limited, buy the company report.
Comprehensive company report
Hi-Tech Blow Moulders Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Hi-Tech Blow Moulders is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Hi-Tech Blow Moulders Private Limited, buy the company report.
Financials of Hi-Tech Blow Moulders Private Limited
FY 2024 filings availableHi-Tech Blow Moulders Private Limited reported revenue of ₹47.04 Cr (down 20% YoY) for FY 2025.
Revenue · FY 2025
₹47.04 Cr ▼ 20%
Net profit · FY 2025
₹1.87 Cr margin 4%
EBITDA · FY 2025
₹3.35 Cr margin 7.1%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▼ 20%
3 years · compounded
▲ 2%
5 years · compounded
▲ 7%
EBITDA CAGR growth
1 year
▼ 34%
3 years · compounded
▲ 3%
5 years · compounded
▲ 20%
Revenue fell 20% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 7%. EBITDA fell 34% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹3.35 Cr | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹1.87 Cr | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 7.1% | ||||
| Net Profit Margin | 4% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Hi-Tech Blow Moulders Private Limited, buy the company report.
Board of directors of Hi-Tech Blow Moulders Private Limited
Hi-Tech Blow Moulders has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Sandeep Goutham Sethiya Also directs: Deccan Pickles Private Limited | Managing Director | 03 Mar 1994 | 32 Years 8 Months | Current |
| Saroj Sethiya | Director | 29 Jun 2007 | 19 Years 4 Months | Current |
Peer comparison
Hi-Tech Blow Moulders Private Limited is compared with the 7 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| PDM Extrusions Private Limited | ₹47.33 Cr (FY 2024) | 23.0% | Delhi, India | |||
| Shah Homeware Private Limited | ₹47.33 Cr (FY 2025) | 16.0% | Kolkata, West Bengal, India | |||
| Plast Alloys (India) Limited | ₹47.33 Cr (FY 2024) | 9.0% | Delhi, India | |||
| Hi-Tech Blow Moulders Private Limitedthis company | ₹47.04 Cr (FY 2025) | ₹1.87 Cr | 4% | -20.0% | Bangalore, Karnataka, India | |
| Centauri Polyfilm Private Limited | ₹46.98 Cr (FY 2024) | 0.0% | Mumbai, Maharashtra, India | |||
| Tirumala Roto Lam Private Limited | ₹46.93 Cr (FY 2025) | 3.0% | Hyderabad, Telangana, India | |||
| Auxo Industries Private Limited | ₹46.76 Cr (FY 2024) | 162.0% | Bhagwanpur, Uttarakhand, India | |||
| Premium Plast Limited | ₹46.71 Cr (FY 2024) | 6.0% | Vasai, Maharashtra, India |
To see the full peer comparison of Hi-Tech Blow Moulders Private Limited, buy the company report.
Auditor
Hi-Tech Blow Moulders Private Limited is audited by Nityananda & Co for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| Nityananda & Co | FY 2023 | 012595S |
Shareholding
The shareholding of Hi-Tech Blow Moulders Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2022 | FY 2021 | FY 2020 | FY 2019 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Hi-Tech Blow Moulders Private Limited, buy the company report.
Charges & borrowings
Open charges
₹13 Cr
Satisfied charges
₹54.7 Cr
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 13 Nov 2018 | 100220717 | Hdfc Bank Limited | ₹13 Cr | Open | |
| 17 Oct 2011 | 10320357 | Tamilnad Mercantile Bank Limited | ₹6 Cr | Satisfied | |
| 29 Sep 2010 | 10252307 | Kotak Mahindra Bank Limited | ₹18.5 Cr | Satisfied | |
| 04 Dec 2007 | 10082842 | Indian Bank | ₹8 Cr | Satisfied | |
| 24 Dec 2004 | 80037058 | Standard Chartered Bank | ₹4.5 Cr | Satisfied |
To see the full charge records of Hi-Tech Blow Moulders Private Limited, buy the company report.
Total charge records: 17 View all charges
Legal cases
Hi-Tech Blow Moulders Private Limited has 2 court cases on record: 1 filed by Hi-Tech Blow Moulders, 1 filed against it. 1 case is pending and 1 is disposed.
Total cases
2
Filed by the company
1
Filed against the company
1
Pending
1
Disposed
1
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 2 | 1 | 1 |
Cases on record (2 of 2)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, BENGALURU, Karnataka | Execution petition | Filed against the company by M S West Coast Polymers Pvt Ltd | Disposed |
| District court, RAMANAGARA, Karnataka | Arbitration matter | Filed by the company against The Special Land Acquisition Officer and Competent Authority | Pending |
To see the full case history of Hi-Tech Blow Moulders Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
MSME payment delays
Hi-Tech Blow Moulders Private Limited has 6 MSME Form 1 returns on record between 2019 and 2023, listing 26 overdue payments to 11 micro and small suppliers. Companies must report dues to micro and small suppliers that stay unpaid for more than 45 days in a half-yearly MSME Form 1 return.
Suppliers with reported dues (5 of 11)
| Supplier | Amount due | Due since | Reported on |
|---|---|---|---|
| an individual supplier | |||
| Saimaa.In LLP | |||
| an individual supplier | |||
| an individual supplier | |||
| an individual supplier |
To see the full MSME payment records of Hi-Tech Blow Moulders Private Limited, buy the company report.
Individuals and sole proprietors among the suppliers are not named.
GST
Hi-Tech Blow Moulders has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 29AAACH4260Q1Z4 | Karnataka | Active | 01 Jul 2017 |
To see the full GST registrations and return filing status of Hi-Tech Blow Moulders Private Limited, buy the company report.
Recent activity
Hi-Tech Blow Moulders Private Limited has 3 board changes on record since 1994: 2 appointments and 1 cessation. The latest: Sidharth Sethiya ceased to be Additional Director on 02 Nov 2011.
AGM
Hi-Tech Blow Moulders Private Limited last Annual general meeting of members was held on 30 Sep 2024 as per latest MCA records.
Filing
Hi-Tech Blow Moulders Private Limited has filed its annual Financial statements for the year ended 31 Mar 2024 with Roc Bangalore.
Charges
A charge registered on 24 Dec 2004 via Charge ID 90199785 with Standard Chartered Bank was fully satisfied on 23 Sep 2019.
Charges
A charge registered on 24 Dec 2004 via Charge ID 90200979 with Standard Chartered Bank was fully satisfied on 23 Sep 2019.
Charges
A charge registered on 29 Sep 2010 via Charge ID 10252307 with Kotak Mahindra Bank Limited was fully satisfied on 17 May 2019.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 1,300.00 Lakh with Charge ID 100220717 was registered on 13 Nov 2018.
Charges
A charge registered on 15 May 1995 via Charge ID 90196854 with Small Industries Development Bank Of India was fully satisfied on 28 Sep 2015.
Charges
A charge registered on 15 May 1995 via Charge ID 90198814 with Small Industries Development Bank Of India was fully satisfied on 28 Sep 2015.
Charges
A charge registered on 18 Mar 2000 via Charge ID 90199318 with State Bank Of India was fully satisfied on 10 Aug 2015.
Charges
A charge registered on 10 Aug 1999 via Charge ID 90196353 with State Bank Of India was fully satisfied on 10 Aug 2015.
Charges
A charge registered on 10 Aug 1999 via Charge ID 90201171 with State Bank Of India was fully satisfied on 10 Aug 2015.
Charges
A charge registered on 07 May 1999 via Charge ID 90199215 with State Bank Of India was fully satisfied on 10 Aug 2015.
29 earlier events are in the company report.
Frequently asked questions
Hi-Tech Blow Moulders is an active private limited company based in Bangalore, Karnataka, India. The company works in rubber-based products, within the manufacturing industry. It was incorporated on 03 March 1994 (32+ years old) and is registered under CIN U29246KA1994PTC015306.
Hi-Tech Blow Moulders has 2 current directors:
- Sandeep Goutham Sethiya - Managing Director
- Saroj Sethiya - Director
The latest financial statements of Hi-Tech Blow Moulders on record with the MCA are for the year ended 31 March 2024. Its last annual general meeting was held on 30 September 2024. Year-wise statements from 2015 are in the company report.
The GSTIN of Hi-Tech Blow Moulders is 29AAACH4260Q1Z4, registered in Karnataka.
The CIN (Corporate Identification Number) of Hi-Tech Blow Moulders is U29246KA1994PTC015306. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Hi-Tech Blow Moulders has 2 court cases on record: 1 filed by the company and 1 filed against it. 1 is pending.
Hi-Tech Blow Moulders was incorporated on 03 March 1994, making it 32+ years old. It is registered with the Registrar of Companies, Bangalore.
The peers of Hi-Tech Blow Moulders by revenue are PDM Extrusions Private Limited, Shah Homeware Private Limited, Plast Alloys (India) Limited, Centauri Polyfilm Private Limited, Tirumala Roto Lam Private Limited and 2 more, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Sidharth Sethiya ceased to be Additional Director on 02 Nov 2011. Saroj Sethiya was appointed as Director on 29 Jun 2007. Sandeep Goutham Sethiya was appointed as Managing Director on 03 Mar 1994.
Yes, Hi-Tech Blow Moulders is registered as a medium enterprise under Udyam registration (number: UDYAM-KR-03-0109386).
Hi-Tech Blow Moulders has 6 MSME Form 1 returns on record between 2019 and 2023, listing 26 overdue payments to 11 micro and small suppliers. The latest return was filed on 29 Dec 2023.
The registered office of Hi-Tech Blow Moulders is at Sy No.75 Solur Village Anekal Taluk Bangalore., Karnataka, India.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
Swiggy Limited Listed company · 92 pages
BharatPe (Resilient Innovations Pvt Ltd) Unlisted company · 78 pages