MSME (Udyam registered) Ministry of MSME
- Category
- Small (2024-25)
- Udyam number
- UDYAM-GJ-20-0017900
Inshape Precision Component Private Limited - machinery and equipment in Kotda Sanghani, Gujarat, India. FY 2026 financials & compliance.
Revenue · FY 2025
₹5.7 Cr
▼ 8% YoY
Net profit · FY 2025
₹10.24 Lakh
Net margin 1.8%
EBITDA · FY 2025
₹88.21 Lakh
EBITDA margin 15.5%
Authorised capital
₹75 Lakh
Registered with MCA
Paid-up capital
₹75 Lakh
Issued & subscribed
Open charges
₹7.39 Cr
Secured borrowings
Company age
7 yrs
Est. 2019
Directors on board
7
As per MCA filings
About Inshape Precision Component Private Limited
Data last updated:
Inshape Precision Component Private Limited is a private limited company based in Kotda Sanghani, Gujarat, India. It operates in the industrial tools and components segment of the machinery and industrial equipment sector. It was incorporated on 22 January 2019 and has been in existence for over 7 years.
The company is registered with the Registrar of Companies (ROC), Ahmedabad, under CIN U74999GJ2019PTC106208. Its GSTIN is 24AAFCI1444N1ZI (Gujarat). The company holds 2 GST registrations, all of them active.
The company has an authorised share capital of ₹75 Lakh and a paid-up capital of ₹75 Lakh. It is led by directors including Jaykumar Anilbhai Vanparia and Jayaben Vallabhbhai Domadia.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Kotda Sanghani, Gujarat.
As per the financials filed for FY 2025, the company reported a revenue of ₹5.7 Cr, a decline of 8% compared to the previous year. For the same year it recorded a net profit of ₹10.24 Lakh (net margin 1.8%) and EBITDA of ₹88.21 Lakh (EBITDA margin 15.5%). Revenue has grown at a compounded annual rate (CAGR) of 23% over three years and 295% over five years.
As per MCA filings, the company has open charges of ₹7.39 Cr on record.
Inshape Precision Component Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-GJ-20-0017900). The current compliance status is marked as compliant by the Registrar of Companies. For more details, the company can be reached via its website ipcpl.co.in.
Company details
CIN U74999GJ2019PTC106208
Registration Number 106208
Incorporation Date 22 January 2019
ROC Ahmedabad
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-GJ-20-0017900
Key People
Hiren Vallabhbhai Domadia Ceo Jaykumar Anilbhai Vanparia Director Jayaben Vallabhbhai Domadia Director Recognitions & Rankings of Inshape Precision Component
Contact details
Inshape Precision Component Private Limited's registered office is in Kotda Sanghani, Gujarat. Its website is ipcpl.co.in. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Website
- Registered AddressSurvey No. 149 Plot No. 2 Sidc Road, Near Dhvani Industrial Area, Kotda Sanghani, Gujarat, India – 360024
- IndustryMachinery and Equipment, Industrial Tools & Components
To see the full contact details of Inshape Precision Component Private Limited, buy the company report.
Comprehensive company report
Inshape Precision Component Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Inshape Precision Component is manufacturing. In detail, this covers metal and metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C7 | Metal and metal products |
To see the full business activity and turnover split of Inshape Precision Component Private Limited, buy the company report.
Financials of Inshape Precision Component Private Limited
FY 2025 filings availableInshape Precision Component Private Limited reported revenue of ₹5.7 Cr (down 8% YoY) for FY 2025.
Revenue · FY 2025
₹5.7 Cr ▼ 8%
Net profit · FY 2025
₹10.24 Lakh margin 1.8%
EBITDA · FY 2025
₹88.21 Lakh margin 15.5%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▼ 8%
3 years · compounded
▲ 23%
5 years · compounded
▲ 295%
EBITDA CAGR growth
1 year
▼ 10%
3 years · compounded
▼ 6%
5 years · compounded
▲ 166%
Revenue fell 8% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 295%. EBITDA fell 10% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹88.21 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹10.24 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 15.5% | ||||
| Net Profit Margin | 1.8% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Inshape Precision Component Private Limited, buy the company report.
Board of directors and KMP of Inshape Precision Component Private Limited
Inshape Precision Component Private Limited currently reports 6 directors and 1 key managerial person. 1 former director has served the organization.
Current Directors and KMP
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Jaykumar Anilbhai Vanparia | Director | 30 Mar 2024 | 2 Years 6 Months | Current |
| Hiren Vallabhbhai Domadia Also directs: Archone Corporation LLP, Inshape Technocast Private Limited | Ceo | 21 Mar 2023 | 3 Years 7 Months | Current |
| Jayaben Vallabhbhai Domadia Also directs: Archone Corporation LLP | Director | 11 Jul 2019 | 7 Years 3 Months | Current |
| Baiju Dineshbhai Sabhaya Also directs: Archone Corporation LLP, Inshape Technocast Private Limited | Director | 22 Jan 2019 | 7 Years 9 Months | Current |
| Pravinkumar Kurjibhai Sorathiya | Director | 01 Mar 2019 | 7 Years 7 Months | Current |
| Haresh Khimjibhai Barsiya Also directs: Intechflow Valve LLP | Director | 01 Mar 2019 | 7 Years 7 Months | Current |
Showing 6 of 7 current directors and KMP. View all directors and KMP
Peer comparison
Inshape Precision Component Private Limited is compared with the 4 companies closest to it by revenue in the Machinery and Equipment industry (Tools and Components), with the same principal business activity (metal and metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Txco Sealing Products Private Limited | ₹5.73 Cr (FY 2025) | -10.0% | Hyderabad, Telangana, India | |||
| Indu Die Blocks Private Limited | ₹5.73 Cr (FY 2025) | 52.0% | Mumbai, Maharashtra, India | |||
| Sidhartha Tools Private Limited | ₹5.7 Cr (FY 2025) | 1.0% | Manesar, Haryana, India | |||
| Inshape Precision Component Private Limitedthis company | ₹5.7 Cr (FY 2025) | ₹10.24 Lakh | 1.8% | -8.0% | Kotda Sanghani, Gujarat, India | |
| Nikopas Engineering Private Limited | ₹5.67 Cr (FY 2024) | 10.0% | Maharashtra, India |
To see the full peer comparison of Inshape Precision Component Private Limited, buy the company report.
Auditor
Inshape Precision Component Private Limited is audited by S P V P & CO. for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| S P V P & CO. | FY 2023 | 155159W |
Shareholding
The shareholding of Inshape Precision Component Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2022 | FY 2021 | FY 2020 | FY 2019 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Inshape Precision Component Private Limited, buy the company report.
Charges & borrowings
Open charges
₹7.39 Cr
Satisfied charges
None
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 10 Nov 2025 | 101191049 | Axis Bank Limited | ₹1.88 Cr | Open | |
| 04 Aug 2025 | 101134173 | Hdfc Bank Limited | ₹35.22 Lakh | Open | |
| 16 Aug 2024 | 100961530 | Hdfc Bank Limited | ₹7.26 Lakh | Open | |
| 05 Aug 2022 | 100599502 | Sidbi | ₹52.49 Lakh | Open | |
| 03 Jun 2022 | 100577507 | Sidbi | ₹63.78 Lakh | Open |
To see the full charge records of Inshape Precision Component Private Limited, buy the company report.
Total charge records: 8 View all charges
Legal cases
No court or tribunal cases involving Inshape Precision Component Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Inshape Precision Component Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
Inshape Precision Component has 2 GST registrations: 2 active.
Total GSTINs
2
Active
2
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 24AAFCI1444N1ZI | Gujarat | Active | 26 Feb 2019 |
| 24AAFCI1444N1DR | Gujarat | Active | 27 Dec 2024 |
To see the full GST registrations and return filing status of Inshape Precision Component Private Limited, buy the company report.
Recent activity
Inshape Precision Component Private Limited has 8 board changes on record since 2019: 7 appointments and 1 cessation. The latest: Anilkumar Laxmanbhai Vanparia ceased to be Director on 26 Apr 2024.
Charges
A charge with Axis Bank Limited amounted to Rs. 188.00 Lakh with Charge ID 101191049 was registered on 10 Nov 2025.
AGM
Inshape Precision Component Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 35.22 Lakh with Charge ID 101134173 was registered on 04 Aug 2025.
Filing
Inshape Precision Component Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Ahmedabad.
Charges
A charge with Hdfc Bank Limited of Rs. 330.00 Lakh registered on 28 Jun 2019 with Charge ID 100275695 was modified on 16 Dec 2024.
Charges
A charge with Hdfc Bank Limited amounted to Rs. 7.26 Lakh with Charge ID 100961530 was registered on 16 Aug 2024.
Ceased
Anilkumar Laxmanbhai Vanparia ceased to be Director.
Appointed
Jaykumar Anilbhai Vanparia was appointed as Director.
Appointed
Hiren Vallabhbhai Domadia was appointed as CEO.
Charges
A charge with Sidbi amounted to Rs. 52.49 Lakh with Charge ID 100599502 was registered on 05 Aug 2022.
Charges
A charge with Sidbi amounted to Rs. 63.78 Lakh with Charge ID 100577507 was registered on 03 Jun 2022.
Charges
A charge with Others amounted to Rs. 30.46 Lakh with Charge ID 100482645 was registered on 21 Aug 2021.
8 earlier events are in the company report.
Frequently asked questions
Inshape Precision Component is an active private limited company based in Kotda Sanghani, Gujarat, India. The company works in industrial tools and components, within the machinery and equipment industry. It was incorporated on 22 January 2019 (7+ years old) and is registered under CIN U74999GJ2019PTC106208.
Inshape Precision Component has 7 current directors and KMP:
- Jaykumar Anilbhai Vanparia - Director
- Jayaben Vallabhbhai Domadia - Director
- Baiju Dineshbhai Sabhaya - Director
- Pravinkumar Kurjibhai Sorathiya - Director
- Haresh Khimjibhai Barsiya - Director
- Brijesh Pambhar Bhikhalal - Director
- Hiren Vallabhbhai Domadia - Ceo
The latest financial statements of Inshape Precision Component on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from FY 2019 are in the company report.
The GSTIN of Inshape Precision Component is 24AAFCI1444N1ZI, registered in Gujarat. The company has 2 GST registrations in all, of which 2 are active. Other active GSTINs include 24AAFCI1444N1DR (Gujarat).
The CIN (Corporate Identification Number) of Inshape Precision Component is U74999GJ2019PTC106208. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Inshape Precision Component was incorporated on 22 January 2019, making it 7+ years old. It is registered with the Registrar of Companies, Ahmedabad.
The peers of Inshape Precision Component by revenue are Txco Sealing Products Private Limited, Indu Die Blocks Private Limited, Sidhartha Tools Private Limited, Nikopas Engineering Private Limited, all in the Machinery and Equipment industry (Tools and Components), with the same principal business activity (metal and metal products).
Anilkumar Laxmanbhai Vanparia ceased to be Director on 26 Apr 2024. Jaykumar Anilbhai Vanparia was appointed as Director on 30 Mar 2024. Hiren Vallabhbhai Domadia was appointed as CEO on 21 Mar 2023. Inshape Precision Component has 8 board changes on record in total.
Yes, Inshape Precision Component is registered as a small enterprise under Udyam registration (number: UDYAM-GJ-20-0017900).
Inshape Precision Component can be reached through the website ipcpl.co.in. Its registered office is in Kotda Sanghani, Gujarat, India.
The registered office of Inshape Precision Component is at Survey No. 149 Plot No. 2 Sidc Road, Near Dhvani Industrial Area, Kotda Sanghani, Gujarat, India – 360024.