MSME (Udyam registered) Ministry of MSME
- Category
- Micro (2024-25)
- Udyam number
- UDYAM-MH-26-0051427
Micron CNC Machines Private Limited
Micron CNC Machines Private Limited - financial services in Pune, Maharashtra, India. FY 2026 financials & compliance.
Revenue · FY 2025
₹2.1 Cr
▲ 45% YoY
Net profit · FY 2025
₹50.95 Lakh
Net margin 24.3%
EBITDA · FY 2025
₹82.86 Lakh
EBITDA margin 39.5%
Authorised capital
₹20 Lakh
Registered with MCA
Paid-up capital
₹16 Lakh
Issued & subscribed
Open charges
₹15 Lakh
Satisfied ₹1 Cr
Company age
29 yrs
Est. 1997
Directors on board
3
As per MCA filings
About Micron CNC Machines Private Limited
Data last updated:
Micron CNC Machines Private Limited is a private limited company based in Pune, Maharashtra, India. It operates in the equipment leasing and financing segment of the financial services sector. It was incorporated on 12 February 1997 and has been in existence for over 29 years.
The company is registered with the Registrar of Companies (ROC), Pune, under CIN U29299MH1997PTC105820.
The company has an authorised share capital of ₹20 Lakh and a paid-up capital of ₹16 Lakh. It is led by directors including Yogini Ashwin Mody and Manoj Jayantilal Mody.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Flat No 4 Atharva Apt. S No 3078 Pl 50 Ashok Nagar Shivajinagar, Pune, Maharashtra, India – 411007.
As per the financials filed for FY 2025, the company reported a revenue of ₹2.1 Cr, a growth of 45% compared to the previous year. For the same year it recorded a net profit of ₹50.95 Lakh (net margin 24.3%) and EBITDA of ₹82.86 Lakh (EBITDA margin 39.5%). Revenue has grown at a compounded annual rate (CAGR) of 22% over three years and 19% over five years.
As per MCA filings, the company has open charges of ₹15 Lakh and satisfied charges of ₹1 Cr on record. Court records list 3 cases involving the company, including 1 filed by the company and 2 filed against it; 1 case is pending.
Micron CNC Machines Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-MH-26-0051427). The current compliance status is marked as compliant by the Registrar of Companies.
Company details
CIN U29299MH1997PTC105820
Registration Number 105820
Incorporation Date 12 February 1997
ROC Pune
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Micro
Udyam Registration UDYAM-MH-26-0051427
Key People
Yogini Ashwin Mody Director Manoj Jayantilal Mody Director Ashwin Jayantilal Mody Director Recognitions & Rankings of Micron CNC Machines
Contact details
Micron CNC Machines Private Limited's registered office is in Pune, Maharashtra. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressFlat No 4 Atharva Apt. S No 3078 Pl 50 Ashok Nagar Shivajinagar, Pune, Maharashtra, India – 411007
- IndustryFinancial Services, Equipment Leasing & Financing
To see the full contact details of Micron CNC Machines Private Limited, buy the company report.
Comprehensive company report
Micron CNC Machines Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activities of Micron CNC Machines are manufacturing and support service to organizations. In detail, this covers metal and metal products and other support services to organizations. 2 activity segments are registered with the MCA.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C7 | Metal and metal products | |
| N | Support service to Organizations | N7 | Other support services to organizations |
To see the full business activity and turnover split of Micron CNC Machines Private Limited, buy the company report.
Financials of Micron CNC Machines Private Limited
FY 2025 filings availableMicron CNC Machines Private Limited reported revenue of ₹2.1 Cr (up 45% YoY) for FY 2025.
Revenue · FY 2025
₹2.1 Cr ▲ 45%
Net profit · FY 2025
₹50.95 Lakh margin 24.3%
EBITDA · FY 2025
₹82.86 Lakh margin 39.5%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▲ 45%
3 years · compounded
▲ 22%
5 years · compounded
▲ 19%
EBITDA CAGR growth
1 year
▲ 145%
3 years · compounded
▲ 46%
5 years · compounded
▲ 31%
Revenue has grown at a compounded annual rate (CAGR) of 19% over five years, including 45% growth in the latest year. EBITDA rose 145% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹82.86 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹50.95 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 39.5% | ||||
| Net Profit Margin | 24.3% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Micron CNC Machines Private Limited, buy the company report.
Board of directors of Micron CNC Machines Private Limited
Micron CNC Machines has 3 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Yogini Ashwin Mody Also directs: Jaykamal Stockbrokers Private Limited | Director | 09 Sep 2017 | 9 Years 1 Months | Current |
| Manoj Jayantilal Mody | Director | 12 Feb 1997 | 29 Years 8 Months | Current |
| Ashwin Jayantilal Mody Also directs: Jaykamal Stockbrokers Private Limited | Director | 12 Feb 1997 | 29 Years 8 Months | Current |
Auditor
Micron CNC Machines Private Limited is audited by KAILAS R. MALPANI & CO. for the financial year 2022.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| KAILAS R. MALPANI & CO. | FY 2022 | 112303W |
Shareholding
The shareholding of Micron CNC Machines Private Limited is on record for 5 financial years, the latest being FY 2022, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2022 | FY 2021 | FY 2020 | FY 2019 | FY 2018 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Micron CNC Machines Private Limited, buy the company report.
Charges & borrowings
Open charges
₹15 Lakh
Satisfied charges
₹1 Cr
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 06 Mar 2013 | 10416302 | Bank of India | ₹15 Lakh | Satisfied | |
| 27 Aug 2011 | 10308085 | The Ahmednagar Merchant'S Cooperative Bank Limited | ₹10 Lakh | Satisfied | |
| 10 Jan 2011 | 10264110 | The Ahmednagar Merchant'S Co-Operative Bank Limited | ₹10.8 Lakh | Satisfied | |
| 12 Jan 2010 | 10199490 | The Ahmednagar Merchant'S Co-Op. Bank Ltd. | ₹9.45 Lakh | Satisfied | |
| 29 Jun 2009 | 10171495 | The Ahmednagar Merchant'S Co-Op .Bank Ltd. | ₹9.9 Lakh | Satisfied |
To see the full charge records of Micron CNC Machines Private Limited, buy the company report.
Total charge records: 9 View all charges
Legal cases
Micron CNC Machines Private Limited has 3 court cases on record: 1 filed by Micron CNC Machines, 2 filed against it. 1 case is pending and 2 are disposed.
Total cases
3
Filed by the company
1
Filed against the company
2
Pending
1
Disposed
2
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 3 | 2 | 1 |
Cases on record (3 of 3)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, Pune, Maharashtra | Civil suit | Filed against the company | Pending |
| District court, Pune, Maharashtra | Court case (Civil M.A.) | Filed against the company | Disposed |
| District court, Pune, Maharashtra | Civil suit | Filed by the company against individuals | Disposed |
To see the full case history of Micron CNC Machines Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
MSME payment delays
Micron CNC Machines Private Limited has 2 MSME Form 1 returns on record for the period ending Sep 2019, listing 13 overdue payments to 1 micro and small supplier. Companies must report dues to micro and small suppliers that stay unpaid for more than 45 days in a half-yearly MSME Form 1 return.
Suppliers with reported dues (1 of 1)
| Supplier | Amount due | Due since | Reported on |
|---|---|---|---|
| Korutech India Private Limited. |
To see the full MSME payment records of Micron CNC Machines Private Limited, buy the company report.
Individuals and sole proprietors among the suppliers are not named.
GST
No GST registration is on our record for Micron CNC Machines Private Limited; the GSTIN and return-filing check is in the company report Buy the company report.
Recent activity
Micron CNC Machines Private Limited has 4 board changes on record since 1997: 3 appointments and 1 cessation. The latest: Yogini Ashwin Mody ceased to be Additional Director on 29 Sep 2017.
AGM
Micron Cnc Machines Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Charges
A charge registered on 06 Mar 2013 via Charge ID 10416302 with Bank Of India was fully satisfied on 07 May 2025.
Filing
Micron Cnc Machines Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Pune.
Ceased
Yogini Ashwin Mody ceased to be Additional Director.
Appointed
Yogini Ashwin Mody was appointed as Director.
Charges
A charge registered on 12 Jan 2010 via Charge ID 10199490 with The Ahmednagar Merchant'S Co-Op. Bank Ltd. was fully satisfied on 23 Jan 2014.
Charges
A charge registered on 11 Jan 2004 via Charge ID 90088704 with The Ahmednagar Merchants Co-Operative Bank Ltd. was fully satisfied on 23 Jan 2014.
Charges
A charge registered on 27 Aug 2011 via Charge ID 10308085 with The Ahmednagar Merchant'S Cooperative Bank Limited was fully satisfied on 01 Sep 2013.
Charges
A charge registered on 24 Jan 2007 via Charge ID 10040696 with Bank Of India was fully satisfied on 30 May 2013.
Charges
A charge registered on 10 Jan 2011 via Charge ID 10264110 with The Ahmednagar Merchant'S Co-Operative Bank Limited was fully satisfied on 02 May 2013.
Charges
A charge with Bank Of India amounted to Rs. 15.00 Lakh with Charge ID 10416302 was registered on 06 Mar 2013.
Charges
A charge registered on 29 Jun 2009 via Charge ID 10171495 with The Ahmednagar Merchant'S Co-Op .Bank Ltd. was fully satisfied on 16 Sep 2011.
13 earlier events are in the company report.
Frequently asked questions
Micron CNC Machines is an active private limited company based in Pune, Maharashtra, India. The company works in equipment leasing and financing, within the financial services industry. It was incorporated on 12 February 1997 (29+ years old) and is registered under CIN U29299MH1997PTC105820.
Micron CNC Machines has 3 current directors:
- Yogini Ashwin Mody - Director
- Manoj Jayantilal Mody - Director
- Ashwin Jayantilal Mody - Director
The latest financial statements of Micron CNC Machines on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from 2015 are in the company report.
The CIN (Corporate Identification Number) of Micron CNC Machines is U29299MH1997PTC105820. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Micron CNC Machines has 3 court cases on record: 1 filed by the company and 2 filed against it. 1 is pending.
Micron CNC Machines was incorporated on 12 February 1997, making it 29+ years old. It is registered with the Registrar of Companies, Pune.
Yogini Ashwin Mody ceased to be Additional Director on 29 Sep 2017. Yogini Ashwin Mody was appointed as Director on 09 Sep 2017. Ashwin Jayantilal Mody was appointed as Director on 12 Feb 1997. Micron CNC Machines has 4 board changes on record in total.
Yes, Micron CNC Machines is registered as a micro enterprise under Udyam registration (number: UDYAM-MH-26-0051427).
Micron CNC Machines has 2 MSME Form 1 returns on record for the period ending Sep 2019, listing 13 overdue payments to 1 micro and small supplier. The latest return was filed on 24 Oct 2019.
The registered office of Micron CNC Machines is at Flat No 4 Atharva Apt. S No 3078 Pl 50 Ashok Nagar Shivajinagar, Pune, Maharashtra, India – 411007.
Micron CNC Machines operates in the financial services industry, in the equipment leasing and financing segment.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
Swiggy Limited Listed company · 92 pages
BharatPe (Resilient Innovations Pvt Ltd) Unlisted company · 78 pages