MSME (Udyam registered) Ministry of MSME
- Category
- Small (2022-23)
- Udyam number
- UDYAM-RJ-02-0006006
Rapid-Tech Moulding Private Limited - manufacturing in Bhiwadi, Rajasthan, India. FY 2026 financials & compliance.
Revenue · FY 2021
₹10.57 Cr
▼ 1% YoY
Net profit · FY 2021
₹1 Cr
Net margin 9.5%
EBITDA · FY 2021
₹2.26 Cr
EBITDA margin 21.3%
Authorised capital
₹1.5 Cr
Registered with MCA
Paid-up capital
₹1.5 Cr
Issued & subscribed
Open charges
₹9.44 Cr
Satisfied ₹5.18 Cr
Company age
11 yrs
Est. 2015
Employees · EPFO
4
Provident fund records
About Rapid-Tech Moulding Private Limited
Data last updated:
Rapid-Tech Moulding Private Limited is a private limited company based in Bhiwadi, Rajasthan, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 24 April 2015 and has been in existence for over 11 years.
The company is registered with the Registrar of Companies (ROC), Jaipur, under CIN U37100RJ2015PTC047424. Its GSTIN is 08AAHCR2872F2Z7 (Rajasthan). The company holds 2 GST registrations, of which 1 is active.
The company has an authorised share capital of ₹1.5 Cr and a paid-up capital of ₹1.5 Cr. It is led by directors Satpal and Lalita.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at G – 1 – 562 RIICO Ind Area Khushkhera Bhiwadi, Rajasthan, India – 301019.
As per the financials filed for FY 2021, the company reported a revenue of ₹10.57 Cr, a decline of 1% compared to the previous year. For the same year it recorded a net profit of ₹1 Cr (net margin 9.5%) and EBITDA of ₹2.26 Cr (EBITDA margin 21.3%). Revenue has grown at a compounded annual rate (CAGR) of 7% over three years and 43% over five years.
The company has about 4 employees on its provident fund (EPFO) records.
As per MCA filings, the company has open charges of ₹9.44 Cr and satisfied charges of ₹5.18 Cr on record. Court records list 35 cases involving the company, including 7 filed by the company and 28 filed against it; 13 cases are pending.
Rapid-Tech Moulding Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-RJ-02-0006006). The current compliance status is marked as compliant by the Registrar of Companies. For more details, the company can be reached via its website rapid-tech.co.in.
Company details
CIN U37100RJ2015PTC047424
Registration Number 047424
Incorporation Date 24 April 2015
ROC Jaipur
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-RJ-02-0006006
Key People
Satpal Director Lalita Additional Director Recognitions & Rankings of Rapid-Tech Moulding
Contact details
Rapid-Tech Moulding Private Limited's registered office is in Bhiwadi, Rajasthan. Its website is rapid-tech.co.in. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Website
- Registered AddressG – 1 – 562 RIICO Ind Area Khushkhera Bhiwadi, Rajasthan, India – 301019
- IndustryManufacturing, Plastic-Based Products
To see the full contact details of Rapid-Tech Moulding Private Limited, buy the company report.
Comprehensive company report
Rapid-Tech Moulding Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Rapid-Tech Moulding is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Rapid-Tech Moulding Private Limited, buy the company report.
Financials of Rapid-Tech Moulding Private Limited
FY 2025 filings availableRapid-Tech Moulding Private Limited reported revenue of ₹10.57 Cr (down 1% YoY) for FY 2021.
Revenue · FY 2021
₹10.57 Cr ▼ 1%
Net profit · FY 2021
₹1 Cr margin 9.5%
EBITDA · FY 2021
₹2.26 Cr margin 21.3%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▼ 1%
3 years · compounded
▼ 7%
5 years · compounded
▲ 43%
EBITDA CAGR growth
1 year
▼ 6%
3 years · compounded
▲ 1%
5 years · compounded
▲ 130%
Revenue fell 1% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 43%. EBITDA fell 6% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2020-21 | FY 2019-20 | FY 2018-19 | FY 2017-18 | FY 2016-17 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | ₹10.57 Cr | ||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹2.26 Cr | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹1 Cr | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2020-21 | FY 2019-20 | FY 2018-19 | FY 2017-18 | FY 2016-17 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 21.3% | ||||
| Net Profit Margin | 9.5% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Rapid-Tech Moulding Private Limited, buy the company report.
Board of directors of Rapid-Tech Moulding Private Limited
Rapid-Tech Moulding has 2 current directors and 5 former directors. Current directors are listed first, with their designation and appointment date.
Peer comparison
Rapid-Tech Moulding Private Limited is compared with the 8 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Turbo Bell Moulds Private Limited | ₹10.64 Cr (FY 2025) | 68.0% | Noida, Uttar Pradesh, India | |||
| Arihant Vacuum Forming Private Limited | ₹10.63 Cr (FY 2025) | 15.0% | Ahmedabad, Gujarat, India | |||
| Navkar Techplast Private Limited | ₹10.62 Cr (FY 2025) | 9.0% | Ahmedabad, Gujarat, India | |||
| Rapid-Tech Moulding Private Limitedthis company | ₹10.57 Cr (FY 2021) | ₹1 Cr | 9.5% | -1.0% | 4 | Bhiwadi, Rajasthan, India |
| Kamakshi Plastics Private Limited | ₹10.56 Cr (FY 2025) | -4.0% | Mumbai, Maharashtra, India | |||
| Zee Insulated Wires Private Limited | ₹10.55 Cr (FY 2025) | 37.0% | Masoori, Uttar Pradesh, India | |||
| Chekkeny Composites Private Limited | ₹10.53 Cr (FY 2025) | -9.0% | Bengaluru, Karnataka, India | |||
| Kanchan Plastics Private Limited | ₹10.53 Cr (FY 2024) | -3.0% | Cuttack, Odisha, India | |||
| Bhulku Industries Private Limited | ₹10.51 Cr (FY 2025) | 1.0% | Mumbai, Maharashtra, India |
To see the full peer comparison of Rapid-Tech Moulding Private Limited, buy the company report.
Auditor
Rapid-Tech Moulding Private Limited is audited by PUSHKAR AND ASSOCIATES for the financial year 2021.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| PUSHKAR AND ASSOCIATES | FY 2021 | 017678S |
Shareholding
The shareholding of Rapid-Tech Moulding Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2021 | FY 2019 | FY 2018 | FY 2017 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Rapid-Tech Moulding Private Limited, buy the company report.
Charges & borrowings
Open charges
₹9.44 Cr
Satisfied charges
₹5.18 Cr
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 06 Jan 2022 | 100528720 | Others | ₹45.45 Lakh | Open | |
| 19 Oct 2021 | 100496939 | Others | ₹41.24 Lakh | Open | |
| 01 Nov 2018 | 100224013 | Hdfc Bank Limited | ₹7.25 Cr | Open | |
| 08 Aug 2016 | 100069775 | Others | ₹1.32 Cr | Open | |
| 29 May 2019 | 100268262 | Others | ₹72 Lakh | Satisfied |
To see the full charge records of Rapid-Tech Moulding Private Limited, buy the company report.
Total charge records: 10 View all charges
Legal cases
Rapid-Tech Moulding Private Limited has 35 court cases on record: 7 filed by Rapid-Tech Moulding, 28 filed against it. 13 cases are pending and 22 are disposed.
Total cases
35
Filed by the company
7
Filed against the company
28
Pending
13
Disposed
22
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 28 | 28 | 13 |
| High courts | 7 | 0 | 0 |
Cases on record (5 of 35)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, Gurugram, Haryana | Cheque dishonour complaint | Filed against the company by M/S Indusind Bank Ltd | Pending |
| District court, Calcutta, West Bengal | Civil suit | Filed against the company by Mercedes-Benz Financial Services India Pvt. Ltd. | Pending |
| District court, Gurugram, Haryana | Cheque dishonour complaint | Filed against the company by M/S Autotech Sirmax India Pvt Ltd | Pending |
| District court, East, Delhi | Court case (OMP (I)(COMM.)) | Filed against the company by Electronica Finance Ltd | Disposed |
| District court, Shahdara, Delhi | Court case (OMP (I) (COMM)) | Filed against the company by M/S Electronica Finance Ltd. | Disposed |
To see the full case history of Rapid-Tech Moulding Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Rapid-Tech Moulding Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
Employees & EPFO
Rapid-Tech Moulding Private Limited has a workforce of 4 employees on its EPFO records as of Apr 05, 2024, across 1 active EPFO establishment.
Employee count
4
Active EPFO establishments
1
Employee growth
33.33%
GST
Rapid-Tech Moulding has 2 GST registrations: 1 active and 1 cancelled or inactive.
Total GSTINs
2
Active
1
Cancelled / inactive
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 08AAHCR2872F2Z7 | Rajasthan | Active | 01 Jul 2017 |
To see the full GST registrations and return filing status of Rapid-Tech Moulding Private Limited, buy the company report.
Recent activity
Rapid-Tech Moulding Private Limited has 7 board changes on record since 2016: 2 appointments and 5 cessations. The latest: Jayant Kumar Sahoo ceased to be Additional Director on 26 Feb 2024.
AGM
Rapid-Tech Moulding Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Filing
Rapid-Tech Moulding Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Jaipur.
Ceased
Jayant Kumar Sahoo ceased to be Additional Director.
Appointed
Lalita was appointed as Additional Director.
Ceased
Lalita ceased to be Director.
Charges
A charge with Others amounted to Rs. 0.45 Cr with Charge ID 100528720 was registered on 06 Jan 2022.
Charges
A charge with Others amounted to Rs. 0.41 Cr with Charge ID 100496939 was registered on 19 Oct 2021.
Charges
A charge registered on 20 Jan 2017 via Charge ID 100073159 with Others was fully satisfied on 20 Sep 2021.
Charges
A charge registered on 29 May 2019 via Charge ID 100268262 with Others was fully satisfied on 16 Sep 2021.
Charges
A charge with Hdfc Bank Limited of Rs. 7.25 Cr registered on 01 Nov 2018 with Charge ID 100224013 was modified on 10 Jun 2020.
Charges
A charge with Others amounted to Rs. 0.72 Cr with Charge ID 100268262 was registered on 29 May 2019.
Charges
A charge registered on 13 Jul 2017 via Charge ID 100112332 with Karnataka Bank Ltd. was fully satisfied on 14 Nov 2018.
16 earlier events are in the company report.
Frequently asked questions
Rapid-Tech Moulding is an active private limited company based in Bhiwadi, Rajasthan, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 24 April 2015 (11+ years old) and is registered under CIN U37100RJ2015PTC047424.
The latest financial statements of Rapid-Tech Moulding on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from FY 2016 are in the company report.
The GSTIN of Rapid-Tech Moulding is 08AAHCR2872F2Z7, registered in Rajasthan. The company has 2 GST registrations in all, of which 1 is active and 1 is cancelled or inactive.
The CIN (Corporate Identification Number) of Rapid-Tech Moulding is U37100RJ2015PTC047424. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Rapid-Tech Moulding has 35 court cases on record: 7 filed by the company and 28 filed against it. 13 are pending. Most are in the district courts.
Rapid-Tech Moulding was incorporated on 24 April 2015, making it 11+ years old. It is registered with the Registrar of Companies, Jaipur.
The peers of Rapid-Tech Moulding by revenue are Turbo Bell Moulds Private Limited, Arihant Vacuum Forming Private Limited, Navkar Techplast Private Limited, Kamakshi Plastics Private Limited, Zee Insulated Wires Private Limited and 3 more, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Jayant Kumar Sahoo ceased to be Additional Director on 26 Feb 2024. Lalita was appointed as Additional Director on 26 Feb 2024. Lalita ceased to be Director on 20 Sep 2022. Rapid-Tech Moulding has 7 board changes on record in total.
Yes, Rapid-Tech Moulding is registered as a small enterprise under Udyam registration (number: UDYAM-RJ-02-0006006).
Rapid-Tech Moulding can be reached through the website rapid-tech.co.in. Its registered office is in Bhiwadi, Rajasthan, India.