Muraj Plast Private Limited - manufacturing in Delhi, India. FY 2026 financials & compliance.
CIN U25202DL2005PTC133904 Incorporated 11 March 2005 ROC Delhi HQ Delhi, India
Active Private Limited Company manufacturing
Data last updated
Revenue · FY 2025
₹37.96 Cr
▲ 12% YoY
Net profit · FY 2025
₹33.02 Lakh
Net margin 0.9%
EBITDA · FY 2025
₹1.84 Cr
EBITDA margin 4.8%
Authorised capital
₹10 Lakh
Registered with MCA
Paid-up capital
₹9.5 Lakh
Issued & subscribed
Open charges
₹19.35 Cr
Satisfied ₹3.13 Cr
Company age
21 yrs
Est. 2005
Employees · EPFO
20
Provident fund records

About Muraj Plast Private Limited

Data last updated:

Muraj Plast Private Limited is a private limited company based in Delhi, India. It operates in the pipe and tubes segment of the manufacturing sector. It was incorporated on 11 March 2005 and has been in existence for over 21 years.

The company is registered with the Registrar of Companies (ROC), Delhi, under CIN U25202DL2005PTC133904. Its GSTIN is 09AAECM2582L1Z2 (Uttar Pradesh). The company holds 3 GST registrations, of which 1 is active.

The company has an authorised share capital of ₹10 Lakh and a paid-up capital of ₹9.5 Lakh. It is led by directors including Mukesh Singla and Saksham Singla.

Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2024. The registered office is at House No. 32 22nd Floor Blk – C Rohit Kunj Pitampura, Delhi, India – 110034.

As per the financials filed for FY 2025, the company reported a revenue of ₹37.96 Cr, a growth of 12% compared to the previous year. For the same year it recorded a net profit of ₹33.02 Lakh (net margin 0.9%) and EBITDA of ₹1.84 Cr (EBITDA margin 4.8%). Revenue has grown at a compounded annual rate (CAGR) of 4% over three years and 7% over five years.

The company has about 20 employees on its provident fund (EPFO) records.

As per MCA filings, the company has open charges of ₹19.35 Cr and satisfied charges of ₹3.13 Cr on record. Court records list 9 cases involving the company, including 2 filed by the company and 7 filed against it; 1 case is pending.

The current compliance status is marked as compliant by the Registrar of Companies. For more details, the company can be reached via its website murajppl.com.

Company Details of Muraj Plast Private Limited
CIN U25202DL2005PTC133904
Registration Number 133904
Incorporation Date 11 March 2005
ROC Delhi
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2024
Compliance Status Active Compliant
Contact Details
  • Email
    Locked
  • Telephone
    Locked
  • Social Media
    Locked
  • Registered Address
    House No. 32 22nd Floor Blk – C Rohit Kunj Pitampura, Delhi, India – 110034
  • Industry
    Manufacturing, Pipe & Tubes, Fittings & Components
Comprehensive company report
Muraj Plast Private Limited - one report that includes everything
  • Company details, directors and signatories
  • Historical financials and ratios
  • Shareholding pattern and group structure
  • Charges with holder and property details
  • Legal cases, compliance and MCA filings
  • One PDF report, delivered after checkout
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included

Unlock the full Muraj Plast Private Limited report

Financials, compliance, directors, charges, ownership and filings for Muraj Plast Private Limited in one report.

Financials from 2015 Directors & ownership Charges & compliance

Business Activity of Muraj Plast Private Limited

The main business activity of Muraj Plast is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.

Main Activity Group CodeDescription of Main ActivityBusiness Activity CodeDescription of Business ActivityTurnover Percentage
CManufacturingC8Plastic products, non-metallic mineral products, rubber products, fabricated metal productsLocked
Premium access

Business activity turnover details

Turnover share and past changes in activity are in the company report.

  • Turnover contribution
  • Historical classifications
  • Filing-level activity changes

Verified entity values are shown only after access is granted.

Financials of Muraj Plast Private Limited FY 2024 filings available

Muraj Plast Private Limited reported revenue of ₹37.96 Cr (up 12% YoY) for FY 2025.

Revenue · FY 2025
₹37.96 Cr ▲ 12%
Net profit · FY 2025
₹33.02 Lakh margin 0.9%
EBITDA · FY 2025
₹1.84 Cr margin 4.8%

Compounded Annual Growth Rate (CAGR) of Muraj Plast Private Limited

Revenue CAGR growth
1 year
▲ 12%
3 years · compounded
▼ 4%
5 years · compounded
▲ 7%
EBITDA CAGR growth
1 year
▲ 25%
3 years · compounded
▲ 7%
5 years · compounded
▲ 16%

Revenue has grown at a compounded annual rate (CAGR) of 7% over five years, including 12% growth in the latest year. EBITDA rose 25% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.

Financial Statement Summary of Muraj Plast Private Limited

MetricsFY 2024-25FY 2023-24FY 2022-23FY 2021-22FY 2020-21
Profit and Loss Statement
Revenue from Operations••••••••••••••••••••
Other Income••••••••••••••••••••
Total Revenue••••••••••••••••••••
Cost of Materials Consumed••••••••••••••••••••
Employee Benefit Expense••••••••••••••••••••
Finance Costs••••••••••••••••••••
Depreciation and Amortisation••••••••••••••••••••
Other Expenses••••••••••••••••••••
Total Expenses••••••••••••••••••••
EBITDA₹1.84 Cr••••••••••••••••
Profit Before Tax••••••••••••••••••••
Tax Expense••••••••••••••••••••
Net Profit (PAT)₹33.02 Lakh••••••••••••••••
Balance Sheet
Share Capital••••••••••••••••••••
Reserves and Surplus••••••••••••••••••••
Net Worth (Total Equity)••••••••••••••••••••
Long-term Borrowings••••••••••••••••••••
Short-term Borrowings••••••••••••••••••••
Trade Payables••••••••••••••••••••
Total Liabilities••••••••••••••••••••
Fixed Assets••••••••••••••••••••
Investments••••••••••••••••••••
Inventories••••••••••••••••••••
Trade Receivables••••••••••••••••••••
Cash and Bank Balance••••••••••••••••••••
Total Assets••••••••••••••••••••

Financial Ratios of Muraj Plast Private Limited

MetricsFY 2024-25FY 2023-24FY 2022-23FY 2021-22FY 2020-21
Profitability
EBITDA Margin4.8%••••••••••••••••
Net Profit Margin0.9%••••••••••••••••
Return on Equity (ROE)••••••••••••••••••••
Return on Capital Employed (ROCE)••••••••••••••••••••
Return on Assets (ROA)••••••••••••••••••••
Liquidity and Debt
Current Ratio••••••••••••••••••••
Quick Ratio••••••••••••••••••••
Debt-to-Equity Ratio••••••••••••••••••••
Interest Coverage Ratio••••••••••••••••••••
Efficiency and Growth
Asset Turnover••••••••••••••••••••
Receivable Days••••••••••••••••••••
Payable Days••••••••••••••••••••
Inventory Days••••••••••••••••••••
Revenue Growth••••••••••••••••••••
Net Profit Growth••••••••••••••••••••

Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Muraj Plast are in the company report.

Premium access

Financial statements from 2015

Earlier years and trend charts are in the company report.

  • Income statements
  • Balance sheets
  • Cash-flow statements
  • Ratios and benchmarks

Verified entity values are shown only after access is granted.

Peer Comparison of Muraj Plast Private Limited

Muraj Plast Private Limited is compared with the companies closest to it by revenue in the Manufacturing industry (Fittings, Pipes). Net profit, margin and employee counts of each company are in the company report.

CompanyRevenueNet profitMarginGrowth (1 yr)EmployeesLocation
Eau Bathing Solutions Private Limited₹38.5 Cr (FY 2025)••••••••-18.0%••••Gurgaon, Haryana, India
Green Manufacturing Co Limited₹38.44 Cr (FY 2025)••••••••32.0%••••Punjab, India
Green Polytubes Private Limited₹38.37 Cr (FY 2024)••••••••-9.0%••••Patna, Bihar, India
Bentlay Fittings Limited₹38.28 Cr (FY 2025)••••••••-65.0%••••Ahmedabad, Gujarat, India
Tulsi Extrusions Limited Listed₹37.99 Cr (FY 2025)••••••••-31.0%••••Jalgaon, Maharashtra, India
Muraj Plast Private Limited this company₹37.96 Cr (FY 2025)••••••••12.0%••••Delhi, India
Pragati Coatings Private Limited₹37.95 Cr (FY 2025)••••••••-21.0%••••Gurugram, Haryana, India
Ratnabhumi Steeltech Private Limited₹37.94 Cr (FY 2025)••••••••19.0%••••Ahmedabad, Gujarat, India
Aligarh Tubes and Shutter Private Limited₹37.91 Cr (FY 2025)••••••••12.0%••••Patna, Bihar, India
Crystal Sanitary Fittings Private Limited₹37.65 Cr (FY 2025)••••••••-3.0%••••Chandigarh, India
Ozone Metallics Private Limited₹37.52 Cr (FY 2018)••••••••-18.0%••••New Delhi, Delhi, India

Peers are the five companies nearest above and the five nearest below Muraj Plast by revenue in the Manufacturing industry (Fittings, Pipes), from the latest filed financials of each company. Net profit, margin and employee counts of each peer are in the company report.

Auditor Details of Muraj Plast Private Limited

Muraj Plast Private Limited is audited by ASHOKGARG for the financial year 2023.

NameStatusAppointment DateCessation Date
ASHOKGARGLockedLockedLocked
Premium access

Complete auditor history

Appointment and cessation dates and past auditor changes are in the company report.

  • Appointment status
  • Appointment dates
  • Cessation dates
  • Auditor changes

Verified entity values are shown only after access is granted.

Board of Directors of Muraj Plast Private Limited

Muraj Plast has 3 directors on record. No former directors are listed.

Current Directors
NameDesignationAppointment DateTenureStatus
Mukesh SinglaDirector11 Mar 200521 Years 7 MonthsCurrent
Saksham SinglaDirector06 Mar 201313 Years 7 MonthsCurrent
Komal SinglaDirector08 Sep 200521 Years 1 MonthsCurrent

Ownership and Shareholding of Muraj Plast Private Limited

Premium access

Shareholding and ownership data

Promoter, institutional, public and beneficial ownership figures are in the company report.

  • Ownership categories
  • Historical changes
  • Group structure
  • FII and DII holdings

Verified entity values are shown only after access is granted.

Charges & Borrowings of Muraj Plast Private Limited

Open charges
₹19.35 Cr
Satisfied charges
₹3.13 Cr
Breakdown by lending institutions
Others₹12.63 Cr
Bank of India₹6.72 Cr
Latest charge details
DateLenderAmountStatus
11 Mar 2024Bank of India₹6.72 CrOpen
23 Dec 2017Others₹12.63 CrOpen
07 May 2010Andhra Bank₹1.93 CrSatisfied
11 Mar 2008Andhra Bank₹1.2 CrSatisfied

Total charge records: 4 View all charges

Employees and EPFO Compliance at Muraj Plast Private Limited

Muraj Plast Private Limited has a workforce of 20 employees as of Apr 09, 2024.

Employee count
20
Active EPFO establishments
1
Employee growth
5.26%
Premium access

Employee and EPFO history

Monthly headcount, contribution history and filing status are in the company report.

  • Monthly headcount
  • PF contributions
  • ECR filing status
  • Establishment history

Verified entity values are shown only after access is granted.

Recent Activity on Muraj Plast Private Limited

Muraj Plast Private Limited has 3 board changes on record since 2005: 3 appointments. The latest: Saksham Singla was appointed as Director on 06 Mar 2013.

AGM
Muraj Plast Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Charges
A charge with Others of Rs. 1,263.21 Lakh registered on 23 Dec 2017 with Charge ID 100161272 was modified on 09 Jul 2025.
Filing
Muraj Plast Private Limited has filed its annual Financial statements for the year ended 31 Mar 2024 with Roc Delhi.
Charges
A charge with Bank Of India amounted to Rs. 672.00 Lakh with Charge ID 100912431 was registered on 11 Mar 2024.
Charges
A charge registered on 07 May 2010 via Charge ID 10219333 with Andhra Bank was fully satisfied on 15 Feb 2018.
Charges
A charge registered on 11 Mar 2008 via Charge ID 10108712 with Andhra Bank was fully satisfied on 15 Feb 2018.
Charges
A charge with Others amounted to Rs. 1,263.21 Lakh with Charge ID 100161272 was registered on 23 Dec 2017.
Charges
A charge with Andhra Bank of Rs. 193.00 Lakh registered on 07 May 2010 with Charge ID 10219333 was modified on 11 Dec 2015.
Charges
A charge with Andhra Bank of Rs. 120.00 Lakh registered on 11 Mar 2008 with Charge ID 10108712 was modified on 19 Feb 2014.
Appointed
Saksham Singla was appointed as Director.
Charges
A charge with Andhra Bank amounted to Rs. 193.00 Lakh with Charge ID 10219333 was registered on 07 May 2010.
Charges
A charge with Andhra Bank amounted to Rs. 120.00 Lakh with Charge ID 10108712 was registered on 11 Mar 2008.

3 earlier events are listed in the company report.

Credit Ratings, Litigation & Regulatory Alerts for Muraj Plast Private Limited

Premium access

Credit ratings, litigation, and regulatory alerts

Credit ratings, court records and regulatory alerts are in the company report.

  • Rating history
  • Court and tribunal cases
  • Regulatory alerts
  • Director-linked violations

Verified entity values are shown only after access is granted.

MSME Payment Delays by Muraj Plast Private Limited

Premium access

MSME payment history

Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.

  • Outstanding amounts
  • Delay periods and reasons
  • MSME-1 filing history
  • Vendor payment signals

Verified entity values are shown only after access is granted.

Subsidiaries & Group Companies of Muraj Plast Private Limited

Premium access

Corporate group structure

Parent, subsidiary, associate and joint venture records with holdings are in the company report.

  • Parent company
  • Subsidiaries and ownership
  • Associates and joint ventures
  • Entity investments

Verified entity values are shown only after access is granted.

GST Compliance of Muraj Plast Private Limited

Muraj Plast has 3 GST registrations: 1 active and 2 cancelled or inactive.

Total GSTINs
3
Active
1
Cancelled / inactive
2
GSTINStateStatusRegistered on
09AAECM2582L1Z2Uttar PradeshActive01 Jul 2017
Premium access

GST registrations and filing compliance

State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.

  • GSTIN registrations
  • State-wise filing status
  • HSN and SAC details
  • Tax jurisdiction records

Verified entity values are shown only after access is granted.

MCA Filings & Documents of Muraj Plast Private Limited

Premium access

MCA filings and documents

Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.

  • Incorporation documents
  • Annual returns and statements
  • Charge filings
  • Complete filing index

Verified entity values are shown only after access is granted.

Frequently Asked Questions about Muraj Plast Private Limited

Muraj Plast is an active private limited company based in Delhi, India. The company works in pipe and tubes, within the manufacturing industry. It was incorporated on 11 March 2005 (21+ years old) and is registered under CIN U25202DL2005PTC133904.

Muraj Plast reported revenue of ₹37.96 Cr for FY 2025 (up 12% YoY).

Muraj Plast has 3 current directors:

Muraj Plast reported a net profit of ₹33.02 Lakh (net margin 0.9%) and EBITDA of ₹1.84 Cr (EBITDA margin 4.8%) for FY 2025, as per its filed financial statements.

The compounded annual growth rate (CAGR) of the revenue of Muraj Plast is -4% over three years and 7% over five years. In the latest year (FY 2025) revenue rose 12%. CAGR is the steady yearly rate that links the first and the last year.

The GSTIN of Muraj Plast is 09AAECM2582L1Z2, registered in Uttar Pradesh. The company has 3 GST registrations in all, of which 1 is active and 2 are cancelled or inactive.

The CIN (Corporate Identification Number) of Muraj Plast is U25202DL2005PTC133904. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.

Muraj Plast has 9 court cases on record: 2 filed by the company and 7 filed against it. 1 is pending.

Muraj Plast was incorporated on 11 March 2005, making it 21+ years old. It is registered with the Registrar of Companies, Delhi.

The peers of Muraj Plast by revenue are Eau Bathing Solutions Private Limited, Green Manufacturing Co Limited, Green Polytubes Private Limited, Bentlay Fittings Limited, Tulsi Extrusions Limited and 5 more, all in the Manufacturing industry (Fittings, Pipes).

Saksham Singla was appointed as Director on 06 Mar 2013. Komal Singla was appointed as Director on 08 Sep 2005. Mukesh Singla was appointed as Director on 11 Mar 2005.

7M+ Indian companies. One platform.

Financials, directors, compliance, charges and shareholding - compiled from official filings and updated regularly.

Subscription plans available