National Plasto Moulding Private Limited
About National Plasto Moulding Private Limited
Data last updated:
National Plasto Moulding Private Limited is a private limited company based in Guwahati, Assam, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 13 November 2006 and has been in existence for over 20 years.
The company is registered with the Registrar of Companies (ROC), Guwahati, under CIN U25209AS2006PTC008263.
The company has an authorised share capital of ₹2.05 Cr and a paid-up capital of ₹2.04 Cr. It is led by directors Ratan Kumar Sharma and Raj Kumar Sharma.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at E.P.I.P. Complex Amingaon, Guwahati, Assam, India – 781031.
As per the financials filed for FY 2025, the company reported a revenue of ₹3.2 Lakh, a growth of 35% compared to the previous year. For the same year it recorded a net profit of ₹2.92 Lakh (net margin 91.3%) and EBITDA of ₹2.92 Lakh (EBITDA margin 91.3%). Revenue has declined at a compounded annual rate (CAGR) of 22% over three years and 10% over five years.
As per MCA filings, the company has open charges of ₹39.91 Cr on record. Court records list 3 cases involving the company, including 2 filed by the company and 1 filed against it.
The current compliance status is marked as compliant by the Registrar of Companies.
Company details
Contact details
National Plasto Moulding Private Limited's registered office is in Guwahati, Assam. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressE.P.I.P. Complex Amingaon, Guwahati, Assam, India – 781031
- IndustryManufacturing, Plastic-Based Products
To see the full contact details of National Plasto Moulding Private Limited, buy the company report.
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
Financials of National Plasto Moulding Private Limited
FY 2025 filings availableNational Plasto Moulding Private Limited reported revenue of ₹3.2 Lakh (up 35% YoY) for FY 2025.
Compounded Annual Growth Rate (CAGR)
Revenue rose 35% in the latest year, though over five years it has declined at a compounded annual rate (CAGR) of 10%. EBITDA rose 41% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹2.92 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | ₹2.92 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 91.3% | ||||
| Net Profit Margin | 91.3% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of National Plasto Moulding Private Limited, buy the company report.
Board of directors of National Plasto Moulding Private Limited
National Plasto Moulding has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Ratan Kumar Sharma | Director | 13 Nov 2006 | 20 Years 0 Months | Current |
| Raj Kumar Sharma Also directs: Mayukh Projects Private Limited, National Plasto Products Private Limited, Ganpati Tracon Private Limited and 2 more | Director | 13 Nov 2006 | 20 Years 0 Months | Current |
Peer comparison
National Plasto Moulding Private Limited is compared with the 10 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Fibro Plast Pvt Ltd | ₹3.24 Lakh (FY 2025) | 46.0% | Kochi, Kerala, India | |||
| Vapi Sonal Plastics Private Limited | ₹3.24 Lakh (FY 2025) | -93.0% | Vapi, Gujarat, India | |||
| Shubh Plastics Private Limited | ₹3.23 Lakh (FY 2025) | -50.0% | Delhi, India | |||
| Interplas India Pvt Ltd | ₹3.21 Lakh (FY 2025) | -8.0% | Kolkata, West Bengal, India | |||
| Nessai Financial Services Pvt.Ltd. | ₹3.21 Lakh (FY 2025) | 53.0% | Kolkata, West Bengal, India | |||
| National Plasto Moulding Private Limitedthis company | ₹3.2 Lakh (FY 2025) | ₹2.92 Lakh | 91.3% | 35.0% | Guwahati, Assam, India | |
| Saitech Mouldings Private Limited | ₹3.19 Lakh (FY 2023) | Bangalore, Karnataka, India | ||||
| Silafrica India Private Limited | ₹3.19 Lakh (FY 2022) | 297.0% | Kharghar, Maharashtra, India | |||
| Sri Vijayalakshmi Poly Straps Private Limited | ₹3.13 Lakh (FY 2020) | -12.0% | Rajapalayam, Tamil Nadu, India | |||
| NGC Rubbers Private Limited | ₹3.12 Lakh (FY 2025) | -16.0% | Jaipur, Rajasthan, India | |||
| Narun Nano Cellulose Private Limited | ₹3.11 Lakh (FY 2022) | 317.0% | Hardoi, Uttar Pradesh, India |
To see the full peer comparison of National Plasto Moulding Private Limited, buy the company report.
Auditor
National Plasto Moulding Private Limited is audited by Khaitan Agarwal and Co. for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| Khaitan Agarwal and Co. | FY 2023 | 326802E |
Shareholding
The shareholding of National Plasto Moulding Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2021 | FY 2020 | FY 2019 | FY 2018 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of National Plasto Moulding Private Limited, buy the company report.
Charges & borrowings
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 15 May 2025 | 101099236 | State Bank of India | ₹9.38 Cr | Open | |
| 27 Dec 2022 | 100665871 | Idbi Bank Limited | ₹9 Cr | Open | |
| 27 Dec 2022 | 100665007 | Idbi Bank Limited | ₹1.3 Cr | Open | |
| 26 Mar 2022 | 100563179 | Idbi Bank Limited | ₹80 Lakh | Open | |
| 21 Jun 2013 | 10437262 | Others | ₹9.43 Cr | Open |
To see the full charge records of National Plasto Moulding Private Limited, buy the company report.
Total charge records: 6 View all charges
Legal cases
National Plasto Moulding Private Limited has 3 court cases on record: 2 filed by National Plasto Moulding, 1 filed against it. All cases are disposed.
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 1 | 1 | 0 |
| High courts | 1 | 0 | 0 |
| NCLT | 1 | 0 | 0 |
Cases on record (3 of 3)
| Court | Type of case | Party | Status |
|---|---|---|---|
| NCLT, Kolkata | Court case (C.A.(CAA)) | Filed by the company | Disposed |
| District court, East Khasi Hills, Meghalaya | Court case (Complaint Registration) | Filed against the company by Registrar of Companies. | Disposed |
| Calcutta High Court | Writ petition | Filed by the company against State of West Bengal & Ors | Disposed |
To see the full case history of National Plasto Moulding Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
Credit ratings & regulatory alerts
National Plasto Moulding Private Limited was last rated by Crisil on 27 Mar 2020.
| Rating agency | Rated on | Rating |
|---|---|---|
| Crisil | 27 Mar 2020 |
To see the full credit ratings and regulatory alerts of National Plasto Moulding Private Limited, buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for National Plasto Moulding Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
Group structure & subsidiaries
National Plasto Moulding has 1 associated company. This group structure data is as of FY 2023. The table lists each entity with its relationship and holding.
GST
No GST registration is on our record for National Plasto Moulding Private Limited; the GSTIN and return-filing check is in the company report Buy the company report.
Recent activity
National Plasto Moulding Private Limited has 4 board changes on record since 2006: 3 appointments and 1 cessation. The latest: Sukhram Sharma ceased to be Director on 21 Feb 2024.
2 earlier events are in the company report.
Frequently asked questions
National Plasto Moulding is an active private limited company based in Guwahati, Assam, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 13 November 2006 (20+ years old) and is registered under CIN U25209AS2006PTC008263.
National Plasto Moulding has 2 current directors:
- Ratan Kumar Sharma - Director
- Raj Kumar Sharma - Director
The latest financial statements of National Plasto Moulding on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from 2015 are in the company report.
The CIN (Corporate Identification Number) of National Plasto Moulding is U25209AS2006PTC008263. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
National Plasto Moulding has 3 court cases on record: 2 filed by the company and 1 filed against it. Most are in the district courts.
National Plasto Moulding was incorporated on 13 November 2006, making it 20+ years old. It is registered with the Registrar of Companies, Guwahati.
The peers of National Plasto Moulding by revenue are Fibro Plast Pvt Ltd, Vapi Sonal Plastics Private Limited, Shubh Plastics Private Limited, Interplas India Pvt Ltd, Nessai Financial Services Pvt.Ltd. and 5 more, all in the Manufacturing industry (Plastic Based Products).
Sukhram Sharma ceased to be Director on 21 Feb 2024. Raj Kumar Sharma was appointed as Director on 13 Nov 2006. Ratan Kumar Sharma was appointed as Director on 13 Nov 2006. National Plasto Moulding has 4 board changes on record in total.
The registered office of National Plasto Moulding is at E.P.I.P. Complex Amingaon, Guwahati, Assam, India – 781031.
National Plasto Moulding operates in the manufacturing industry, in the plastic-based products segment.
National Plasto Moulding has open charges of ₹39.91 Cr and no satisfied charges on record as per latest MCA filings.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
