About Param Machining Technologies Private Limited
Data last updated:
Param Machining Technologies Private Limited is a private limited company based in Thane, Maharashtra, India. It operates in the industrial machinery retail and distribution segment of the machinery and industrial equipment sector. It was incorporated on 02 April 2012 and has been in existence for over 14 years.
The company is registered with the Registrar of Companies (ROC), Mumbai, under CIN U74120MH2012PTC229098. Its GSTIN is 27AAGCP5777L1ZO (Maharashtra).
The company has an authorised share capital of ₹10 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors Sameer Bhaskar Kamath and Gautam Bhaskar Kamath.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at 204 2nd Floor Primus Business Park, Thane, Maharashtra.
As per the financials filed for FY 2025, the company reported a revenue of ₹7.72 Cr, a growth of 12% compared to the previous year. For the same year it recorded a net profit of ₹20.69 Lakh (net margin 2.7%) and EBITDA of ₹43.98 Lakh (EBITDA margin 5.7%). Revenue has grown at a compounded annual rate (CAGR) of 21% over three years and 19% over five years.
As per MCA filings, the company has open charges of ₹1.76 Cr on record.
The current compliance status is marked as compliant by the Registrar of Companies. For more details, the company can be reached via its website pmtech.in.
- EmailLocked
- TelephoneLocked
- Website
- Social MediaLocked
- Registered Address204 2nd Floor Primus Business Park, Plot No A/195 Road No 16/A Wagle Industrial Estate, Thane, Maharashtra, India – 400604
- IndustryMachinery and Equipment, Industrial Machinery Retail & Distribution
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
- One PDF report, delivered after checkout
Business Activity of Param Machining Technologies Private Limited
The main business activity of Param Machining Technologies is wholesale and retail trade; repair of motor vehicles and motorcycles. In detail, this covers wholesale trade, except of motor vehicles and motorcycles.
| Main Activity Group Code | Description of Main Activity | Business Activity Code | Description of Business Activity | Turnover Percentage |
|---|---|---|---|---|
| G | Wholesale and retail trade; repair of motor vehicles and motorcycles | 46 | Wholesale trade, except of motor vehicles and motorcycles | Locked |
Business activity turnover details
Turnover share and past changes in activity are in the company report.
- Turnover contribution
- Historical classifications
- Filing-level activity changes
Verified entity values are shown only after access is granted.
Auditor Details of Param Machining Technologies Private Limited
Param Machining Technologies Private Limited is audited by HEENA HIRAL RAJA & CO for the financial year 2020.
| Name | Status | Appointment Date | Cessation Date |
|---|---|---|---|
| HEENA HIRAL RAJA & CO | Locked | Locked | Locked |
Complete auditor history
Appointment and cessation dates and past auditor changes are in the company report.
- Appointment status
- Appointment dates
- Cessation dates
- Auditor changes
Verified entity values are shown only after access is granted.
Board of Directors of Param Machining Technologies Private Limited
Param Machining Technologies has 2 current directors and 2 former directors. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Sameer Bhaskar Kamath | Director | 02 Apr 2012 | 14 Years 6 Months | Current |
| Gautam Bhaskar Kamath | Director | 02 Apr 2012 | 14 Years 6 Months | Current |
Financials of Param Machining Technologies Private Limited FY 2025 filings available
Param Machining Technologies Private Limited reported revenue of ₹7.72 Cr (up 12% YoY) for FY 2025.
Compounded Annual Growth Rate (CAGR) of Param Machining Technologies Private Limited
Revenue has grown at a compounded annual rate (CAGR) of 19% over five years, including 12% growth in the latest year. EBITDA rose 73% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary of Param Machining Technologies Private Limited
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | •••• | •••• | •••• | •••• | •••• |
| Other Income | •••• | •••• | •••• | •••• | •••• |
| Total Revenue | •••• | •••• | •••• | •••• | •••• |
| Cost of Materials Consumed | •••• | •••• | •••• | •••• | •••• |
| Employee Benefit Expense | •••• | •••• | •••• | •••• | •••• |
| Finance Costs | •••• | •••• | •••• | •••• | •••• |
| Depreciation and Amortisation | •••• | •••• | •••• | •••• | •••• |
| Other Expenses | •••• | •••• | •••• | •••• | •••• |
| Total Expenses | •••• | •••• | •••• | •••• | •••• |
| EBITDA | ₹43.98 Lakh | •••• | •••• | •••• | •••• |
| Profit Before Tax | •••• | •••• | •••• | •••• | •••• |
| Tax Expense | •••• | •••• | •••• | •••• | •••• |
| Net Profit (PAT) | ₹20.69 Lakh | •••• | •••• | •••• | •••• |
| Balance Sheet | |||||
| Share Capital | •••• | •••• | •••• | •••• | •••• |
| Reserves and Surplus | •••• | •••• | •••• | •••• | •••• |
| Net Worth (Total Equity) | •••• | •••• | •••• | •••• | •••• |
| Long-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Short-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Trade Payables | •••• | •••• | •••• | •••• | •••• |
| Total Liabilities | •••• | •••• | •••• | •••• | •••• |
| Fixed Assets | •••• | •••• | •••• | •••• | •••• |
| Investments | •••• | •••• | •••• | •••• | •••• |
| Inventories | •••• | •••• | •••• | •••• | •••• |
| Trade Receivables | •••• | •••• | •••• | •••• | •••• |
| Cash and Bank Balance | •••• | •••• | •••• | •••• | •••• |
| Total Assets | •••• | •••• | •••• | •••• | •••• |
Financial Ratios of Param Machining Technologies Private Limited
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 5.7% | •••• | •••• | •••• | •••• |
| Net Profit Margin | 2.7% | •••• | •••• | •••• | •••• |
| Return on Equity (ROE) | •••• | •••• | •••• | •••• | •••• |
| Return on Capital Employed (ROCE) | •••• | •••• | •••• | •••• | •••• |
| Return on Assets (ROA) | •••• | •••• | •••• | •••• | •••• |
| Liquidity and Debt | |||||
| Current Ratio | •••• | •••• | •••• | •••• | •••• |
| Quick Ratio | •••• | •••• | •••• | •••• | •••• |
| Debt-to-Equity Ratio | •••• | •••• | •••• | •••• | •••• |
| Interest Coverage Ratio | •••• | •••• | •••• | •••• | •••• |
| Efficiency and Growth | |||||
| Asset Turnover | •••• | •••• | •••• | •••• | •••• |
| Receivable Days | •••• | •••• | •••• | •••• | •••• |
| Payable Days | •••• | •••• | •••• | •••• | •••• |
| Inventory Days | •••• | •••• | •••• | •••• | •••• |
| Revenue Growth | •••• | •••• | •••• | •••• | •••• |
| Net Profit Growth | •••• | •••• | •••• | •••• | •••• |
Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Param Machining Technologies are in the company report.
Financial statements from 2015
Earlier years and trend charts are in the company report.
- Income statements
- Balance sheets
- Cash-flow statements
- Ratios and benchmarks
Verified entity values are shown only after access is granted.
Ownership and Shareholding of Param Machining Technologies Private Limited
Shareholding and ownership data
Promoter, institutional, public and beneficial ownership figures are in the company report.
- Ownership categories
- Historical changes
- Group structure
- FII and DII holdings
Verified entity values are shown only after access is granted.
Charges & Borrowings of Param Machining Technologies Private Limited
| Date | Lender | Amount | Status |
|---|---|---|---|
| 08 Nov 2024 | Others | ₹10 Lakh | Open |
| 04 Jan 2024 | Others | ₹1.5 Cr | Open |
| 19 Jan 2019 | Others | ₹10 Lakh | Open |
| 12 Apr 2018 | Others | ₹5.65 Lakh | Open |
Total charge records: 4 View all charges
Employees and EPFO Compliance at Param Machining Technologies Private Limited
Employment history and EPFO contributions of people linked to Param Machining Technologies.
Employee and EPFO history
Monthly headcount, contribution history and filing status are in the company report.
- Monthly headcount
- PF contributions
- ECR filing status
- Establishment history
Verified entity values are shown only after access is granted.
GST Compliance of Param Machining Technologies Private Limited
Param Machining Technologies has 1 GST registration: 1 active.
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 27AAGCP5777L1ZO | Maharashtra | Active | 01 Jul 2017 |
GST registrations and filing compliance
State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.
- GSTIN registrations
- State-wise filing status
- HSN and SAC details
- Tax jurisdiction records
Verified entity values are shown only after access is granted.
Credit Ratings, Litigation & Regulatory Alerts for Param Machining Technologies Private Limited
Credit ratings, litigation, and regulatory alerts
Credit ratings, court records and regulatory alerts are in the company report.
- Rating history
- Court and tribunal cases
- Regulatory alerts
- Director-linked violations
Verified entity values are shown only after access is granted.
MSME Payment Delays by Param Machining Technologies Private Limited
MSME payment history
Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.
- Outstanding amounts
- Delay periods and reasons
- MSME-1 filing history
- Vendor payment signals
Verified entity values are shown only after access is granted.
Subsidiaries & Group Companies of Param Machining Technologies Private Limited
Corporate group structure
Parent, subsidiary, associate and joint venture records with holdings are in the company report.
- Parent company
- Subsidiaries and ownership
- Associates and joint ventures
- Entity investments
Verified entity values are shown only after access is granted.
MCA Filings & Documents of Param Machining Technologies Private Limited
MCA filings and documents
Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.
- Incorporation documents
- Annual returns and statements
- Charge filings
- Complete filing index
Verified entity values are shown only after access is granted.
Recent Activity on Param Machining Technologies Private Limited
Frequently Asked Questions about Param Machining Technologies Private Limited
Param Machining Technologies is an active private limited company based in Thane, Maharashtra, India. The company works in industrial machinery retail and distribution, within the machinery and equipment industry. It was incorporated on 02 April 2012 (14+ years old) and is registered under CIN U74120MH2012PTC229098.
Param Machining Technologies reported revenue of ₹7.72 Cr for FY 2025 (up 12% YoY).
Param Machining Technologies has 2 current directors:
- Sameer Bhaskar Kamath - Director
- Gautam Bhaskar Kamath - Director
Param Machining Technologies reported a net profit of ₹20.69 Lakh (net margin 2.7%) and EBITDA of ₹43.98 Lakh (EBITDA margin 5.7%) for FY 2025, as per its filed financial statements.
The compounded annual growth rate (CAGR) of the revenue of Param Machining Technologies is 21% over three years and 19% over five years. In the latest year (FY 2025) revenue rose 12%. CAGR is the steady yearly rate that links the first and the last year.
The GSTIN of Param Machining Technologies is 27AAGCP5777L1ZO, registered in Maharashtra.
The CIN (Corporate Identification Number) of Param Machining Technologies is U74120MH2012PTC229098. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Param Machining Technologies was incorporated on 02 April 2012, making it 14+ years old. It is registered with the Registrar of Companies, Mumbai.
Param Machining Technologies can be reached through the website pmtech.in. Its registered office is in Thane, Maharashtra, India.