MSME (Udyam registered) Ministry of MSME
- Category
- Small (2024-25)
- Udyam number
- UDYAM-KR-03-0154948
Plasto Moulders Private Limited
Plasto Moulders Private Limited - manufacturing in Bangalore, Karnataka, India. FY 2026 financials & compliance.
Revenue · FY 2024
₹1.51 Cr
▼ 38% YoY
Net loss · FY 2024
₹81.98 Lakh
Net margin -54.4%
EBITDA · FY 2024
-₹29.63 Lakh
EBITDA margin -19.6%
Authorised capital
₹75 Lakh
Registered with MCA
Paid-up capital
₹75 Lakh
Issued & subscribed
Open charges
₹3 Cr
Satisfied ₹1.88 Cr
Company age
14 yrs
Est. 2012
Directors on board
2
As per MCA filings
About Plasto Moulders Private Limited
Data last updated:
Plasto Moulders Private Limited is a private limited company based in Bangalore, Karnataka, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 12 April 2012 and has been in existence for over 14 years.
The company is registered with the Registrar of Companies (ROC), Bangalore, under CIN U25209KA2012PTC063516. Its GSTIN is 29AAGCP5538D1ZA (Karnataka).
The company has an authorised share capital of ₹75 Lakh and a paid-up capital of ₹75 Lakh. It is led by directors Mohamed Ashfaq and Ashfaq Jabeen.
Its last annual general meeting (AGM) was held on 30 September 2024, and its latest financial statements are for the year ended 31 March 2024. The registered office is at Shed No. A – 51 Kssidc Industrial Estate Kumbalgodu, Bangalore, Karnataka, India – 560074.
As per the financials filed for FY 2024, the company reported a revenue of ₹1.51 Cr, a decline of 38% compared to the previous year. For the same year it recorded a net loss of ₹81.98 Lakh (net margin -54.4%) and EBITDA of -₹29.63 Lakh (EBITDA margin -19.6%). Revenue has grown at a compounded annual rate (CAGR) of 27% over three years and 7% over five years.
As per MCA filings, the company has open charges of ₹3 Cr and satisfied charges of ₹1.88 Cr on record. Court records list 1 case involving the company, including 1 filed by the company. The company has 1 deal on record (1 rights issue); the latest was in May 2020. Its 7 peer companies in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products) are compared by revenue, 3 larger and 4 smaller; the largest is Softex Polymer Products Private Limited with revenue of ₹1.53 Cr.
Plasto Moulders Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-KR-03-0154948). The current compliance status is marked as compliant by the Registrar of Companies.
Company details
CIN U25209KA2012PTC063516
Registration Number 063516
Incorporation Date 12 April 2012
ROC Bangalore
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2024
Date of Balance Sheet 31 March 2024
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-KR-03-0154948
Key People
Mohamed Ashfaq Director Ashfaq Jabeen Director Recognitions & Rankings of Plasto Moulders
Contact details
Plasto Moulders Private Limited's registered office is in Bangalore, Karnataka. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressShed No. A – 51 Kssidc Industrial Estate Kumbalgodu, Bangalore, Karnataka, India – 560074
- IndustryManufacturing, Plastic-Based Products
To see the full contact details of Plasto Moulders Private Limited, buy the company report.
Comprehensive company report
Plasto Moulders Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Plasto Moulders is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Plasto Moulders Private Limited, buy the company report.
Financials of Plasto Moulders Private Limited
FY 2024 filings availablePlasto Moulders Private Limited reported revenue of ₹1.51 Cr (down 38% YoY) for FY 2024.
Revenue · FY 2024
₹1.51 Cr ▼ 38%
Net loss · FY 2024
₹81.98 Lakh margin -54.4%
EBITDA · FY 2024
-₹29.63 Lakh margin -19.6%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▼ 38%
3 years · compounded
▼ 27%
5 years · compounded
▲ 7%
EBITDA CAGR growth
1 year
▼ 155%
3 years · compounded
▼ 130%
5 years · compounded
▼ 29%
Revenue fell 38% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 7%. EBITDA fell 155% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | -₹29.63 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | -₹81.98 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | -19.6% | ||||
| Net Profit Margin | -54.4% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Plasto Moulders Private Limited, buy the company report.
Board of directors of Plasto Moulders Private Limited
Plasto Moulders has 2 directors on record. No former directors are listed.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Mohamed Ashfaq Also directs: Bio-Plasto Manufacturing Private Limited | Director | 12 Apr 2012 | 14 Years 6 Months | Current |
| Ashfaq Jabeen Also directs: Bio-Plasto Manufacturing Private Limited | Director | 12 Apr 2012 | 14 Years 6 Months | Current |
Peer comparison
Plasto Moulders Private Limited is compared with the 7 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Softex Polymer Products Private Limited | ₹1.53 Cr (FY 2025) | -10.0% | Kolkata, West Bengal, India | |||
| Satyanand Plastics Private Limited | ₹1.52 Cr (FY 2025) | -22.0% | Mumbai, Maharashtra, India | |||
| Sando Rubber Private Limited | ₹1.52 Cr (FY 2025) | 37.0% | Chandrakona, West Bengal, India | |||
| Plasto Moulders Private Limitedthis company | ₹1.51 Cr (FY 2024) | -₹81.98 Lakh | -54.4% | -38.0% | Bangalore, Karnataka, India | |
| VDS Plastics Pvt. Ltd. | ₹1.5 Cr (FY 2020) | 4.0% | Delhi, India | |||
| Miltech Industries Private Limited | ₹1.5 Cr (FY 2022) | -87.0% | Nagpur, Maharashtra, India | |||
| Kam Plastics Private Limited | ₹1.5 Cr (FY 2024) | -64.0% | Nagpur, Maharashtra, India | |||
| Samundra Green Valley Private Limited | ₹1.5 Cr (FY 2023) | -12.0% | Langha Road, Uttarakhand, India |
To see the full peer comparison of Plasto Moulders Private Limited, buy the company report.
Auditor
Plasto Moulders Private Limited is audited by SANTHAPPA & CO. for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| SANTHAPPA & CO. | FY 2023 | 003613S |
Shareholding
The shareholding of Plasto Moulders Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2022 | FY 2021 | FY 2019 | FY 2018 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Plasto Moulders Private Limited, buy the company report.
Charges & borrowings
Open charges
₹3 Cr
Satisfied charges
₹1.88 Cr
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 21 May 2020 | 100338544 | State Bank of India | ₹3 Cr | Open | |
| 20 Aug 2013 | 10447883 | State Bank of India | ₹1.88 Cr | Satisfied |
To see the full charge records of Plasto Moulders Private Limited, buy the company report.
Total charge records: 2 View all charges
Deals & funding
Plasto Moulders Private Limited has 1 deal on record (1 rights issue); the latest was in May 2020.
Total deals
1
Rights issue
1
Deals on record (1 of 1)
| When | Deal | Amount | Parties |
|---|---|---|---|
| May 2020 | Rights issue | ₹50 Lakh | Investors: 2 individuals |
Deal records are compiled from filings and public sources; amounts are shown only where the source reported them.
Legal cases
Plasto Moulders Private Limited has 1 court case on record: 1 filed by Plasto Moulders. All case is disposed.
Total cases
1
Filed by the company
1
Disposed
1
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| High courts | 1 | 0 | 0 |
Cases on record (1 of 1)
| Court | Type of case | Party | Status |
|---|---|---|---|
| Patna High Court | Court case (CWJC) | Filed by the company against The State of Bihar | Disposed |
To see the full case history of Plasto Moulders Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Plasto Moulders Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
Employees & EPFO
Plasto Moulders Private Limited has 1 active EPFO establishment as of Mar 31, 2024.
Active EPFO establishments
1
GST
Plasto Moulders has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 29AAGCP5538D1ZA | Karnataka | Active | 01 Jul 2017 |
To see the full GST registrations and return filing status of Plasto Moulders Private Limited, buy the company report.
Recent activity
Plasto Moulders Private Limited has 2 board changes on record since 2012: 2 appointments. The latest: Ashfaq Jabeen was appointed as Director on 12 Apr 2012.
AGM
Plasto Moulders Private Limited last Annual general meeting of members was held on 30 Sep 2024 as per latest MCA records.
Filing
Plasto Moulders Private Limited has filed its annual Financial statements for the year ended 31 Mar 2024 with Roc Bangalore.
Charges
A charge with State Bank Of India amounted to Rs. 300.00 Lakh with Charge ID 100338544 was registered on 21 May 2020.
Charges
A charge registered on 20 Aug 2013 via Charge ID 10447883 with State Bank Of India was fully satisfied on 13 May 2020.
Charges
A charge with State Bank Of India amounted to Rs. 188.00 Lakh with Charge ID 10447883 was registered on 20 Aug 2013.
Appointed
Ashfaq Jabeen was appointed as Director.
Appointed
Mohamed Ashfaq was appointed as Director.
Incorporation
12 Apr 2012
Plasto Moulders Private Limited was registered on 12 Apr 2012 with Roc Bangalore & aged 14 years 6 months as per MCA records.
Frequently asked questions
Plasto Moulders is an active private limited company based in Bangalore, Karnataka, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 12 April 2012 (14+ years old) and is registered under CIN U25209KA2012PTC063516.
Plasto Moulders has 2 current directors:
- Mohamed Ashfaq - Director
- Ashfaq Jabeen - Director
The latest financial statements of Plasto Moulders on record with the MCA are for the year ended 31 March 2024. Its last annual general meeting was held on 30 September 2024. Year-wise statements from 2015 are in the company report.
The GSTIN of Plasto Moulders is 29AAGCP5538D1ZA, registered in Karnataka.
The CIN (Corporate Identification Number) of Plasto Moulders is U25209KA2012PTC063516. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Plasto Moulders has 1 court case on record: 1 filed by the company.
Plasto Moulders was incorporated on 12 April 2012, making it 14+ years old. It is registered with the Registrar of Companies, Bangalore.
Plasto Moulders has 1 deal on record (1 rights issue); the latest was in May 2020.
The peers of Plasto Moulders by revenue are Softex Polymer Products Private Limited, Satyanand Plastics Private Limited, Sando Rubber Private Limited, VDS Plastics Pvt. Ltd, Miltech Industries Private Limited and 2 more, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Ashfaq Jabeen was appointed as Director on 12 Apr 2012. Mohamed Ashfaq was appointed as Director on 12 Apr 2012.
Yes, Plasto Moulders is registered as a small enterprise under Udyam registration (number: UDYAM-KR-03-0154948).
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
Swiggy Limited Listed company · 92 pages
BharatPe (Resilient Innovations Pvt Ltd) Unlisted company · 78 pages