Precision Moulds and Dies Private Limited

Precision Moulds and Dies Private Limited - manufacturing in New Delhi, Delhi, India. FY 2026 financials & compliance.
CIN U29295DL1997PTC086005 Incorporated 20 March 1997 ROC Delhi HQ New Delhi, Delhi, India
Active Private Limited Company manufacturing
Revenue · FY 2024
₹52.74 Cr
▼ 11% YoY
Net profit · FY 2024
₹78.66 Lakh
Net margin 1.5%
EBITDA · FY 2024
₹3.05 Cr
EBITDA margin 5.8%
Authorised capital
₹10 Lakh
Registered with MCA
Paid-up capital
₹10 Lakh
Issued & subscribed
Open charges
₹32.63 Cr
Satisfied ₹11.18 Cr
Company age
29 yrs
Est. 1997
Employees · EPFO
31
Provident fund records

About Precision Moulds and Dies Private Limited

Data last updated:

Precision Moulds and Dies Private Limited is a private limited company based in New Delhi, Delhi, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 20 March 1997 and has been in existence for over 29 years.

The company is registered with the Registrar of Companies (ROC), Delhi, under CIN U29295DL1997PTC086005. Its GSTIN is 07AACCP5134F2ZN (Delhi). The company holds 11 GST registrations, of which 8 are active.

The company has an authorised share capital of ₹10 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors Guljit Singh Kochhar (Managing Director) and Arjun Kochhar Singh (Whole-Time Director).

Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at 129 Jorbagh, New Delhi, Delhi, India – 110003.

As per the financials filed for FY 2024, the company reported a revenue of ₹52.74 Cr, a decline of 11% compared to the previous year. For the same year it recorded a net profit of ₹78.66 Lakh (net margin 1.5%) and EBITDA of ₹3.05 Cr (EBITDA margin 5.8%). Revenue has grown at a compounded annual rate (CAGR) of 11% over three years and 5% over five years.

The company has about 31 employees on its provident fund (EPFO) records.

As per MCA filings, the company has open charges of ₹32.63 Cr and satisfied charges of ₹11.18 Cr on record. Court records list 34 cases involving the company, including 33 filed by the company and 1 filed against it; 6 cases are pending. The company has 1 deal on record (1 secondary share transfer); the latest was in July 2018. Its 4 peer companies in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products) are compared by revenue, 2 larger and 2 smaller; the largest is Kaveri Plasto Containers Private Limited with revenue of ₹53.06 Cr.

The current compliance status is marked as compliant by the Registrar of Companies. For more details, the company can be reached via its website pmd-india.com.

Company details

CIN U29295DL1997PTC086005
Registration Number 086005
Incorporation Date 20 March 1997
ROC Delhi
Listing Status Unlisted
Company Status Active
Compliance Status Active Compliant

Contact details

Precision Moulds and Dies Private Limited's registered office is in New Delhi, Delhi. Its website is pmd-india.com. Its e-mail address and telephone number are in the company report.

  • Email
  • Telephone
  • Registered Address
    129 Jorbagh, New Delhi, Delhi, India – 110003
  • Industry
    Manufacturing, Plastic-Based Products

To see the full contact details of Precision Moulds and Dies Private Limited, buy the company report.

Comprehensive company report
Precision Moulds and Dies Private Limited - one report that includes everything
  • Company details, directors and signatories
  • Historical financials and ratios
  • Shareholding pattern and group structure
  • Charges with holder and property details
  • Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included

Business activity

The main business activity of Precision Moulds and Dies is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.

Main activity group codeMain activityBusiness activity codeBusiness activityShare of turnover
CManufacturingC8Plastic products, non-metallic mineral products, rubber products, fabricated metal products

To see the full business activity and turnover split of Precision Moulds and Dies Private Limited, buy the company report.

Financials of Precision Moulds and Dies Private Limited

FY 2025 filings available

Precision Moulds and Dies Private Limited reported revenue of ₹52.74 Cr (down 11% YoY) for FY 2024.

Revenue · FY 2024
₹52.74 Cr ▼ 11%
Net profit · FY 2024
₹78.66 Lakh margin 1.5%
EBITDA · FY 2024
₹3.05 Cr margin 5.8%

Compounded Annual Growth Rate (CAGR)

Revenue CAGR growth
1 year
▼ 11%
3 years · compounded
▲ 11%
5 years · compounded
▲ 5%
EBITDA CAGR growth
1 year
▼ 10%
3 years · compounded
▼ 3%

Revenue fell 11% in the latest year, but over five years it has grown at a compounded annual rate (CAGR) of 5%. EBITDA fell 10% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.

Financial Statement Summary

MetricsFY 2023-24FY 2022-23FY 2021-22FY 2020-21FY 2019-20
Profit and Loss Statement
Revenue from Operations
Other Income
Total Revenue₹52.74 Cr
Cost of Materials Consumed
Employee Benefit Expense
Finance Costs
Depreciation and Amortisation
Other Expenses
Total Expenses
EBITDA₹3.05 Cr
Profit Before Tax
Tax Expense
Net Profit (PAT)₹78.66 Lakh
Balance Sheet
Share Capital
Reserves and Surplus
Net Worth (Total Equity)
Long-term Borrowings
Short-term Borrowings
Trade Payables
Total Liabilities
Fixed Assets
Investments
Inventories
Trade Receivables
Cash and Bank Balance
Total Assets

Financial Ratios

MetricsFY 2023-24FY 2022-23FY 2021-22FY 2020-21FY 2019-20
Profitability
EBITDA Margin5.8%
Net Profit Margin1.5%
Return on Equity (ROE)
Return on Capital Employed (ROCE)
Return on Assets (ROA)
Liquidity and Debt
Current Ratio
Quick Ratio
Debt-to-Equity Ratio
Interest Coverage Ratio
Efficiency and Growth
Asset Turnover
Receivable Days
Payable Days
Inventory Days
Revenue Growth
Net Profit Growth

To see the full financial statements and ratios of Precision Moulds and Dies Private Limited, buy the company report.

Board of directors of Precision Moulds and Dies Private Limited

Precision Moulds and Dies has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.

Current Directors
NameDesignationAppointment DateTenureStatus
Guljit Singh KochharManaging Director20 Mar 199729 Years 7 MonthsCurrent
Arjun Kochhar SinghWhole-Time Director30 Jun 20188 Years 4 MonthsCurrent

Peer comparison

Precision Moulds and Dies Private Limited is compared with the 4 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.

CompanyRevenueNet profitMarginGrowth (1 yr)EmployeesLocation
Kaveri Plasto Containers Private Limited₹53.06 Cr (FY 2025)-10.0%Bengaluru, Karnataka, India
Ramanand Polyfab Private Limited₹52.98 Cr (FY 2025)29.0%Kadi, Gujarat, India
Precision Moulds and Dies Private Limitedthis company₹52.74 Cr (FY 2024)₹78.66 Lakh1.5%-11.0%New Delhi, Delhi, India
Tulsiratan Plastics Pvt Ltd₹52.67 Cr (FY 2025)-7.0%Nagpur, Maharashtra, India
Energyspin Private Limited₹52.45 Cr (FY 2025)-1.0%Rajapalayam, Tamil Nadu, India

To see the full peer comparison of Precision Moulds and Dies Private Limited, buy the company report.

Auditor

Precision Moulds and Dies Private Limited is audited by Mehra & Sistani for the financial year 2024.

Auditor firmFinancial yearFirm registration number
Mehra & SistaniFY 2024000409N

Shareholding

The shareholding of Precision Moulds and Dies Private Limited is on record for 4 financial years, the latest being FY 2024, split between promoters, domestic institutions, foreign institutions, public shareholders and others.

Shareholder categoryFY 2024FY 2023FY 2017FY 2016
Promoters
Domestic institutional investors (DII)
Foreign institutional investors (FII)
Public
Others

To see the full shareholding pattern of Precision Moulds and Dies Private Limited, buy the company report.

Charges & borrowings

Open charges
₹32.63 Cr
Satisfied charges
₹11.18 Cr
Breakdown by lending institutions
Axis Bank Limited₹28.64 Cr
Sidbi₹3.33 Cr
Others₹0.60 Cr
Hdfc Bank Limited₹0.07 Cr
Latest charge details
DateCharge IDLenderAmountStatusModified or satisfied on
01 Apr 2026101334610Sidbi₹50 LakhOpen
14 Jan 2026101232355Sidbi₹1.08 CrOpen
19 Dec 2024101042768Others₹60 LakhOpen
20 Sep 2024100975905Sidbi₹1.74 CrOpen
10 Jun 2024100968279Axis Bank Limited₹14.7 LakhOpen

To see the full charge records of Precision Moulds and Dies Private Limited, buy the company report.

Total charge records: 10 View all charges

Deals & funding

Precision Moulds and Dies Private Limited has 1 deal on record (1 secondary share transfer); the latest was in July 2018.

Total deals
1
Secondary share transfer
1

Deals on record (1 of 1)

WhenDealAmountParties
Jul 2018Secondary share transferUndisclosedBuyer: 2 individuals
Seller: an individual

Deal records are compiled from filings and public sources; amounts are shown only where the source reported them.

MSME payment delays

No delayed payments to MSME suppliers are on our record for Precision Moulds and Dies Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.

GST

Precision Moulds and Dies has 11 GST registrations: 8 active and 3 cancelled or inactive. The first 4 active GSTINs are listed below.

Total GSTINs
11
Active
8
Cancelled / inactive
3
GSTINStateStatusRegistered on
07AACCP5134F2ZNDelhiActive09 Mar 2025
02AACCP5134F1ZYHimachal PradeshActive01 Jul 2017
09AACCP5134F1ZKUttar PradeshActive01 Jul 2017
06AACCP5134F1ZQHaryanaActive31 Jan 2023

To see the full GST registrations and return filing status of Precision Moulds and Dies Private Limited, buy the company report.

Recent activity

Precision Moulds and Dies Private Limited has 3 board changes on record since 1997: 2 appointments and 1 cessation. The latest: Manjit Kochhar ceased to be Director on 11 Jul 2018.

Charges
A charge with Axis Bank Limited of Rs. 2,849.00 Lakh registered on 07 Jun 2024 with Charge ID 100933054 was modified on 17 Apr 2026.
Charges
A charge with Sidbi amounted to Rs. 50.00 Lakh with Charge ID 101334610 was registered on 01 Apr 2026.
Charges
A charge registered on 27 May 2021 via Charge ID 100458308 with Hdfc Bank Limited was fully satisfied on 28 Mar 2026.
Charges
A charge registered on 28 Sep 2020 via Charge ID 100372309 with Sidbi was fully satisfied on 19 Mar 2026.
Charges
A charge with Sidbi amounted to Rs. 108.44 Lakh with Charge ID 101232355 was registered on 14 Jan 2026.
Charges
A charge registered on 14 Jan 2010 via Charge ID 10196057 with District Industries Center was fully satisfied on 17 Oct 2025.
AGM
Precision Moulds And Dies Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Filing
Precision Moulds And Dies Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Delhi I.
Charges
A charge with Others amounted to Rs. 60.00 Lakh with Charge ID 101042768 was registered on 19 Dec 2024.
Charges
A charge with Sidbi amounted to Rs. 174.41 Lakh with Charge ID 100975905 was registered on 20 Sep 2024.
Charges
A charge with Axis Bank Limited amounted to Rs. 14.70 Lakh with Charge ID 100968279 was registered on 10 Jun 2024.
Charges
A charge with Axis Bank Limited amounted to Rs. 2,849.00 Lakh with Charge ID 100933054 was registered on 07 Jun 2024.

8 earlier events are in the company report.

Frequently asked questions

Precision Moulds and Dies is an active private limited company based in New Delhi, Delhi, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 20 March 1997 (29+ years old) and is registered under CIN U29295DL1997PTC086005.

Precision Moulds and Dies has 2 current directors:

The latest financial statements of Precision Moulds and Dies on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from 2015 are in the company report.

The GSTIN of Precision Moulds and Dies is 07AACCP5134F2ZN, registered in Delhi. The company has 11 GST registrations in all, of which 8 are active and 3 are cancelled or inactive. Other active GSTINs include 02AACCP5134F1ZY (Himachal Pradesh), 09AACCP5134F1ZK (Uttar Pradesh), 06AACCP5134F1ZQ (Haryana).

The CIN (Corporate Identification Number) of Precision Moulds and Dies is U29295DL1997PTC086005. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.

Precision Moulds and Dies has 34 court cases on record: 33 filed by the company and 1 filed against it. 6 are pending. Most are in the district courts.

Precision Moulds and Dies was incorporated on 20 March 1997, making it 29+ years old. It is registered with the Registrar of Companies, Delhi.

Precision Moulds and Dies has 1 deal on record (1 secondary share transfer); the latest was in July 2018.

The peers of Precision Moulds and Dies by revenue are Kaveri Plasto Containers Private Limited, Ramanand Polyfab Private Limited, Tulsiratan Plastics Pvt Ltd, Energyspin Private Limited, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).

Manjit Kochhar ceased to be Director on 11 Jul 2018. Arjun Kochhar Singh was appointed as Whole-Time Director on 30 Jun 2018. Guljit Singh Kochhar was appointed as Managing Director on 20 Mar 1997.

Precision Moulds and Dies can be reached through the website pmd-india.com. Its registered office is in New Delhi, Delhi, India.