MSME (Udyam registered) Ministry of MSME
- Category
- Small (2023-24)
- Udyam number
- UDYAM-UP-28-0031828
Samwon Precision Mould Mfg (India) Private Limited - manufacturing in New Delhi, Delhi, India. FY 2026 financials & compliance.
Revenue · FY 2025
₹33.45 Lakh
▼ 86% YoY
Net loss · FY 2025
₹5.77 Cr
Latest filing
EBITDA · FY 2025
-₹4.27 Cr
Latest filing
Authorised capital
₹15.8 Cr
Registered with MCA
Paid-up capital
₹15.71 Cr
Issued & subscribed
Satisfied charges
₹5 Cr
No open charges
Company age
22 yrs
Est. 2004
Directors on board
3
As per MCA filings
About Samwon Precision Mould Mfg (India) Private Limited
Data last updated:
Samwon Precision Mould Mfg (India) Private Limited is a private limited company based in New Delhi, Delhi, India, a subsidiary of Samwon Precision Mould Mfg. Co. Ltd., Korea. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 29 January 2004 and has been in existence for over 22 years.
The company is registered with the Registrar of Companies (ROC), Delhi, under CIN U25209DL2004PTC124357. Its GSTIN is 09AAHCS8926K1ZN (Uttar Pradesh). The company holds 2 GST registrations, of which 1 is active.
The company has an authorised share capital of ₹15.8 Cr and a paid-up capital of ₹15.71 Cr. It is led by directors including Yong Sub Song and Kum Sook Choi.
Its last annual general meeting (AGM) was held on 30 September 2024, and its latest financial statements are for the year ended 31 March 2024. The registered office is at C – 114 Shop / Office No. 4 First Floor Fateh Nagar Jail Road, New Delhi, Delhi, India – 110018.
As per the financials filed for FY 2025, the company reported a revenue of ₹33.45 Lakh, a decline of 86% compared to the previous year. For the same year it recorded a net loss of ₹5.77 Cr and EBITDA of -₹4.27 Cr. Revenue has declined at a compounded annual rate (CAGR) of 67% over three years and 52% over five years.
As per MCA filings, the company has satisfied charges of ₹5 Cr on record. Court records list 3 cases involving the company, including 3 filed against it.
Samwon Precision Mould Mfg (India) Private Limited is registered as a small enterprise under the Udyam registration framework (Reg. No. UDYAM-UP-28-0031828). The current compliance status is marked as compliant by the Registrar of Companies. For more details, the company can be reached via its website samwonmold.com.
Company details
CIN U25209DL2004PTC124357
Registration Number 124357
Incorporation Date 29 January 2004
ROC Delhi
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2024
Date of Balance Sheet 31 March 2024
Parent Company Samwon Precision Mould Mfg. Co. Ltd., Korea
Compliance Status Active Compliant
MSME Classification Small
Udyam Registration UDYAM-UP-28-0031828
Recognitions & Rankings of Samwon Precision Mould Mfg (India)
Contact details
Samwon Precision Mould Mfg (India) Private Limited's registered office is in New Delhi, Delhi. Its website is samwonmold.com. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Website
- Registered AddressC – 114 Shop / Office No. 4 First Floor Fateh Nagar Jail Road, New Delhi, Delhi, India – 110018
- IndustryManufacturing, Plastic-Based Products
To see the full contact details of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Comprehensive company report
Samwon Precision Mould Mfg (India) Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Samwon Precision Mould Mfg (India) is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C8 | Plastic products, non-metallic mineral products, rubber products, fabricated metal products |
To see the full business activity and turnover split of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Financials of Samwon Precision Mould Mfg (India) Private Limited
FY 2024 filings availableSamwon Precision Mould Mfg (India) Private Limited reported revenue of ₹33.45 Lakh (down 86% YoY) for FY 2025.
Revenue · FY 2025
₹33.45 Lakh ▼ 86%
Net loss · FY 2025
₹5.77 Cr
EBITDA · FY 2025
-₹4.27 Cr
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▼ 86%
3 years · compounded
▼ 67%
5 years · compounded
▼ 52%
EBITDA CAGR growth
1 year
▼ 361%
3 years · compounded
▼ 55%
5 years · compounded
▼ 29%
Revenue has declined at a compounded annual rate (CAGR) of 52% over five years, including a 86% fall in the latest year. EBITDA fell 361% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | -₹4.27 Cr | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | -₹5.77 Cr | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2024-25 | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | |||||
| Net Profit Margin | |||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Board of directors of Samwon Precision Mould Mfg (India) Private Limited
Samwon Precision Mould Mfg (India) has 3 current directors and 8 former directors. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Yong Sub Song Also directs: Samwon Mould India Private Limited | Director | 29 Jan 2004 | 22 Years 8 Months | Current |
| Kum Sook Choi | Director | 29 Jan 2004 | 22 Years 8 Months | Current |
| Sunki Jeong | Director | 11 Apr 2024 | 2 Years 6 Months | Current |
Peer comparison
Samwon Precision Mould Mfg (India) Private Limited is compared with the 5 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| Samwon Precision Mould Mfg (India) Private Limitedthis company | ₹33.45 Lakh (FY 2025) | -₹5.77 Cr | -86.0% | New Delhi, Delhi, India | ||
| Doer International Trading & Manufacturing Private Limited | ₹33.44 Lakh (FY 2019) | Chennai, Tamil Nadu, India | ||||
| Konnect Kaps Trade Link Private Limited | ₹33.38 Lakh (FY 2024) | Vadodara, Gujarat, India | ||||
| Wiz Plast Private Limited | ₹33.33 Lakh (FY 2025) | -96.0% | Bangalore, Karnataka, India | |||
| Dee Bee Polymers Pvt Ltd | ₹33.33 Lakh (FY 2025) | 21.0% | Kolkata, West Bengal, India | |||
| Eshan Ecodrive Private Limited | ₹32.72 Lakh (FY 2025) | 376.0% | Chandigarh, India |
To see the full peer comparison of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Auditor
Samwon Precision Mould Mfg (India) Private Limited is audited by VA Mehta & Co for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| VA Mehta & Co | FY 2023 | 022691N |
Shareholding
The shareholding of Samwon Precision Mould Mfg (India) Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2021 | FY 2020 | FY 2019 | FY 2018 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Charges & borrowings
Open charges
None
Satisfied charges
₹5 Cr
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 16 May 2023 | 100727050 | Industrial Bank of Korea | ₹5 Cr | Satisfied |
To see the full charge records of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Total charge records: 1 View all charges
Legal cases
Samwon Precision Mould Mfg (India) Private Limited has 3 court cases on record: 3 filed against it. All cases are disposed.
Total cases
3
Filed against the company
3
Disposed
3
Cases by court
| Court | Cases | Against the company | Pending |
|---|---|---|---|
| District courts | 2 | 2 | 0 |
| High courts | 1 | 1 | 0 |
Cases on record (2 of 3)
| Court | Type of case | Party | Status |
|---|---|---|---|
| District court, New Delhi, Delhi | Criminal case | Filed against the company by Bhansali Engineering Polymers Ltd. | Disposed |
| High Court of Delhi | Tax appeal | Filed against the company by Principal Commissioner of Income Tax - 8 | Disposed |
To see the full case history of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Case records are compiled from court listings and may lag the court's own records. A case filed against a company is not a finding against it.
MSME payment delays
Samwon Precision Mould Mfg (India) Private Limited has 3 MSME Form 1 returns on record between 2021 and 2022, listing 56 overdue payments to 7 micro and small suppliers. Companies must report dues to micro and small suppliers that stay unpaid for more than 45 days in a half-yearly MSME Form 1 return.
Suppliers with reported dues (5 of 7)
| Supplier | Amount due | Due since | Reported on |
|---|---|---|---|
| an individual supplier | |||
| Robust Aerotech Private Limited | |||
| Albatross Finechem Private Limited | |||
| an individual supplier | |||
| an individual supplier |
To see the full MSME payment records of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Individuals and sole proprietors among the suppliers are not named.
GST
Samwon Precision Mould Mfg (India) has 2 GST registrations: 1 active and 1 cancelled or inactive.
Total GSTINs
2
Active
1
Cancelled / inactive
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 09AAHCS8926K1ZN | Uttar Pradesh | Active | 01 Jul 2017 |
To see the full GST registrations and return filing status of Samwon Precision Mould Mfg (India) Private Limited, buy the company report.
Recent activity
Samwon Precision Mould Mfg (India) Private Limited has 11 board changes on record since 2004: 4 appointments and 7 cessations. The latest: Bhawna Saunkhiya ceased to be Company Secretary on 09 Jun 2025.
Ceased
Bhawna Saunkhiya ceased to be Company Secretary.
Charges
A charge registered on 16 May 2023 via Charge ID 100727050 with Industrial Bank Of Korea was fully satisfied on 05 Dec 2024.
AGM
Samwon Precision Mould Mfg (India) Private Limited last Annual general meeting of members was held on 30 Sep 2024 as per latest MCA records.
Ceased
Sunki Jeong ceased to be Additional Director.
Ceased
Heedong Lee ceased to be Additional Director.
Appointed
Sunki Jeong was appointed as Director.
Filing
Samwon Precision Mould Mfg (India) Private Limited has filed its annual Financial statements for the year ended 31 Mar 2024 with Roc Delhi.
Charges
A charge with Industrial Bank Of Korea of Rs. 5.00 Cr registered on 16 May 2023 with Charge ID 100727050 was modified on 22 Feb 2024.
Charges
A charge with Industrial Bank Of Korea amounted to Rs. 5.00 Cr with Charge ID 100727050 was registered on 16 May 2023.
Ceased
Boo Han Kim ceased to be Additional Director.
Ceased
Geun Yeop Lee ceased to be Additional Director.
Appointed
Heedong Lee was appointed as Additional Director.
5 earlier events are in the company report.
Frequently asked questions
Samwon Precision Mould Mfg (India) is an active private limited company based in New Delhi, Delhi, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 29 January 2004 (22+ years old) and is registered under CIN U25209DL2004PTC124357.
Samwon Precision Mould Mfg (India) has 3 current directors:
- Yong Sub Song - Director
- Kum Sook Choi - Director
- Sunki Jeong - Director
The latest financial statements of Samwon Precision Mould Mfg (India) on record with the MCA are for the year ended 31 March 2024. Its last annual general meeting was held on 30 September 2024. Year-wise statements from 2015 are in the company report.
The GSTIN of Samwon Precision Mould Mfg (India) is 09AAHCS8926K1ZN, registered in Uttar Pradesh. The company has 2 GST registrations in all, of which 1 is active and 1 is cancelled or inactive.
The CIN (Corporate Identification Number) of Samwon Precision Mould Mfg (India) is U25209DL2004PTC124357. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Samwon Precision Mould Mfg (India) has 3 court cases on record: 3 filed against it. Most are in the district courts.
Samwon Precision Mould Mfg (India) was incorporated on 29 January 2004, making it 22+ years old. It is registered with the Registrar of Companies, Delhi.
The peers of Samwon Precision Mould Mfg (India) by revenue are Doer International Trading & Manufacturing Private Limited, Konnect Kaps Trade Link Private Limited, Wiz Plast Private Limited, Dee Bee Polymers Pvt Ltd, Eshan Ecodrive Private Limited, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).
Bhawna Saunkhiya ceased to be Company Secretary on 09 Jun 2025. Sunki Jeong ceased to be Additional Director on 29 Sep 2024. Heedong Lee ceased to be Additional Director on 27 Apr 2024. Samwon Precision Mould Mfg (India) has 11 board changes on record in total.
Yes, Samwon Precision Mould Mfg (India) is registered as a small enterprise under Udyam registration (number: UDYAM-UP-28-0031828).
Samwon Precision Mould Mfg (India) has 3 MSME Form 1 returns on record between 2021 and 2022, listing 56 overdue payments to 7 micro and small suppliers. The latest return was filed on 30 Apr 2022.
Samwon Precision Mould Mfg (India) can be reached through the website samwonmold.com. Its registered office is in New Delhi, Delhi, India.