MSME (Udyam registered) Ministry of MSME
- Category
- Micro (2024-25)
- Udyam number
- UDYAM-MH-17-0021635
Sandy Plastmould Private Limited
Sandy Plastmould Private Limited - manufacturing in Thane, Maharashtra, India. FY 2026 financials & compliance.
Revenue · FY 2023
₹3.02 Cr
▲ 38% YoY
Net profit · FY 2023
₹2.3 Lakh
Net margin 0.8%
EBITDA · FY 2023
₹11.79 Lakh
EBITDA margin 3.9%
Authorised capital
₹5 Lakh
Registered with MCA
Paid-up capital
₹3 Lakh
Issued & subscribed
Open charges
₹79.5 Lakh
Secured borrowings
Company age
21 yrs
Est. 2005
Directors on board
2
As per MCA filings
About Sandy Plastmould Private Limited
Data last updated:
Sandy Plastmould Private Limited is a private limited company based in Thane, Maharashtra, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 08 June 2005 and has been in existence for over 21 years.
The company is registered with the Registrar of Companies (ROC), Mumbai, under CIN U25200MH2005PTC153864. Its GSTIN is 27AAJCS0423K1ZB (Maharashtra).
The company has an authorised share capital of ₹5 Lakh and a paid-up capital of ₹3 Lakh. It is led by directors Sunil Narayan Thadathil and Sandeep Narayan Thadathil.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at 31 Shankar Ind Estatenavghar Vasai (E), Thane, Maharashtra, India – 401210.
As per the financials filed for FY 2023, the company reported a revenue of ₹3.02 Cr, a growth of 38% compared to the previous year. For the same year it recorded a net profit of ₹2.3 Lakh (net margin 0.8%) and EBITDA of ₹11.79 Lakh (EBITDA margin 3.9%). Revenue has grown at a compounded annual rate (CAGR) of 16% over three years and 24% over five years.
As per MCA filings, the company has open charges of ₹79.5 Lakh on record.
Sandy Plastmould Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-MH-17-0021635). The current compliance status is marked as compliant by the Registrar of Companies.
Company Details of Sandy Plastmould Private Limited
CIN U25200MH2005PTC153864
Registration Number 153864
Incorporation Date 08 June 2005
ROC Mumbai
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Micro
Udyam Registration UDYAM-MH-17-0021635
Recognitions & Rankings of Sandy Plastmould
Contact Details
- EmailLocked
- TelephoneLocked
- WebsiteLocked
- Social MediaLocked
- Registered Address31 Shankar Ind Estatenavghar Vasai (E), Thane, Maharashtra, India – 401210
- IndustryManufacturing, Plastic-Based Products
Comprehensive company report
Sandy Plastmould Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
- One PDF report, delivered after checkout
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business Activity of Sandy Plastmould Private Limited
The main business activity of Sandy Plastmould is manufacturing. In detail, this covers manufacture of rubber and plastics products.
| Main Activity Group Code | Description of Main Activity | Business Activity Code | Description of Business Activity | Turnover Percentage |
|---|---|---|---|---|
| C | Manufacturing | 22 | Manufacture of rubber and plastics products | Locked |
Premium access
Business activity turnover details
Turnover share and past changes in activity are in the company report.
- Turnover contribution
- Historical classifications
- Filing-level activity changes
Verified entity values are shown only after access is granted.
Financials of Sandy Plastmould Private Limited FY 2025 filings available
Sandy Plastmould Private Limited reported revenue of ₹3.02 Cr (up 38% YoY) for FY 2023.
Revenue · FY 2023
₹3.02 Cr ▲ 38%
Net profit · FY 2023
₹2.3 Lakh margin 0.8%
EBITDA · FY 2023
₹11.79 Lakh margin 3.9%
Compounded Annual Growth Rate (CAGR) of Sandy Plastmould Private Limited
Revenue CAGR growth
1 year
▲ 38%
3 years · compounded
▲ 16%
5 years · compounded
▲ 24%
EBITDA CAGR growth
1 year
▼ 21%
3 years · compounded
▼ 32%
Revenue has grown at a compounded annual rate (CAGR) of 24% over five years, including 38% growth in the latest year. EBITDA fell 21% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary of Sandy Plastmould Private Limited
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | •••• | •••• | •••• | •••• | •••• |
| Other Income | •••• | •••• | •••• | •••• | •••• |
| Total Revenue | •••• | •••• | •••• | •••• | •••• |
| Cost of Materials Consumed | •••• | •••• | •••• | •••• | •••• |
| Employee Benefit Expense | •••• | •••• | •••• | •••• | •••• |
| Finance Costs | •••• | •••• | •••• | •••• | •••• |
| Depreciation and Amortisation | •••• | •••• | •••• | •••• | •••• |
| Other Expenses | •••• | •••• | •••• | •••• | •••• |
| Total Expenses | •••• | •••• | •••• | •••• | •••• |
| EBITDA | ₹11.79 Lakh | •••• | •••• | •••• | •••• |
| Profit Before Tax | •••• | •••• | •••• | •••• | •••• |
| Tax Expense | •••• | •••• | •••• | •••• | •••• |
| Net Profit (PAT) | ₹2.3 Lakh | •••• | •••• | •••• | •••• |
| Balance Sheet | |||||
| Share Capital | •••• | •••• | •••• | •••• | •••• |
| Reserves and Surplus | •••• | •••• | •••• | •••• | •••• |
| Net Worth (Total Equity) | •••• | •••• | •••• | •••• | •••• |
| Long-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Short-term Borrowings | •••• | •••• | •••• | •••• | •••• |
| Trade Payables | •••• | •••• | •••• | •••• | •••• |
| Total Liabilities | •••• | •••• | •••• | •••• | •••• |
| Fixed Assets | •••• | •••• | •••• | •••• | •••• |
| Investments | •••• | •••• | •••• | •••• | •••• |
| Inventories | •••• | •••• | •••• | •••• | •••• |
| Trade Receivables | •••• | •••• | •••• | •••• | •••• |
| Cash and Bank Balance | •••• | •••• | •••• | •••• | •••• |
| Total Assets | •••• | •••• | •••• | •••• | •••• |
Financial Ratios of Sandy Plastmould Private Limited
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 3.9% | •••• | •••• | •••• | •••• |
| Net Profit Margin | 0.8% | •••• | •••• | •••• | •••• |
| Return on Equity (ROE) | •••• | •••• | •••• | •••• | •••• |
| Return on Capital Employed (ROCE) | •••• | •••• | •••• | •••• | •••• |
| Return on Assets (ROA) | •••• | •••• | •••• | •••• | •••• |
| Liquidity and Debt | |||||
| Current Ratio | •••• | •••• | •••• | •••• | •••• |
| Quick Ratio | •••• | •••• | •••• | •••• | •••• |
| Debt-to-Equity Ratio | •••• | •••• | •••• | •••• | •••• |
| Interest Coverage Ratio | •••• | •••• | •••• | •••• | •••• |
| Efficiency and Growth | |||||
| Asset Turnover | •••• | •••• | •••• | •••• | •••• |
| Receivable Days | •••• | •••• | •••• | •••• | •••• |
| Payable Days | •••• | •••• | •••• | •••• | •••• |
| Inventory Days | •••• | •••• | •••• | •••• | •••• |
| Revenue Growth | •••• | •••• | •••• | •••• | •••• |
| Net Profit Growth | •••• | •••• | •••• | •••• | •••• |
Paid data: the figures shown as dots are available after purchase of the company report. Figures as filed with the MCA in Form AOC-4. The full year-wise statements and ratios of Sandy Plastmould are in the company report.
Premium access
Financial statements from 2015
Earlier years and trend charts are in the company report.
- Income statements
- Balance sheets
- Cash-flow statements
- Ratios and benchmarks
Verified entity values are shown only after access is granted.
Board of Directors of Sandy Plastmould Private Limited
Sandy Plastmould has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Sunil Narayan Thadathil Also directs: Nuortho Wellness LLP | Director | 08 Jun 2005 | 21 Years 4 Months | Current |
| Sandeep Narayan Thadathil | Director | 08 Jun 2005 | 21 Years 4 Months | Current |
Peer Comparison of Sandy Plastmould Private Limited
Sandy Plastmould Private Limited is compared with the companies closest to it by revenue in the Manufacturing industry (Plastic Based Products). Net profit, margin and employee counts of each company are in the company report.
| Company | Revenue | Net profit | Margin | Growth (1 yr) | Employees | Location |
|---|---|---|---|---|---|---|
| A.V.Goel Plastic Industries Private Limited | ₹3.06 Cr (FY 2017) | •••• | •••• | •••• | Meerut, Uttar Pradesh, India | |
| Ambika Vyapar Private Limited | ₹3.04 Cr (FY 2023) | •••• | •••• | -34.0% | •••• | Chennai, Tamil Nadu, India |
| Compeng Composite Solutions (OPC) Private Limited | ₹3.04 Cr (FY 2025) | •••• | •••• | 167.0% | •••• | Pune, Maharashtra, India |
| Manjira Rubber Industries Private Limited | ₹3.03 Cr (FY 2025) | •••• | •••• | -6.0% | •••• | Hyderabad, Telangana, India |
| K.B.Poly Industries Pvt. Ltd | ₹3.03 Cr (FY 2025) | •••• | •••• | 15.0% | •••• | Cuttack, Odisha, India |
| Sandy Plastmould Private Limited this company | ₹3.02 Cr (FY 2023) | •••• | •••• | 38.0% | •••• | Thane, Maharashtra, India |
| Kross Agro Industries Private Limited | ₹3 Cr (FY 2025) | •••• | •••• | 144.0% | •••• | Gandhinagar, Gujarat, India |
| Udaya Food Factory Private Limited | ₹3 Cr (FY 2025) | •••• | •••• | 15954.0% | •••• | Manipal, Karnataka, India |
| Strahlend Polymers Private Limited | ₹2.99 Cr (FY 2024) | •••• | •••• | 417933.0% | •••• | Bawal, Haryana, India |
| Essem Polyalloys Private Limited | ₹2.98 Cr (FY 2025) | •••• | •••• | -17.0% | •••• | New Delhi, Delhi, India |
| Systrans Polymers Private Limited | ₹2.98 Cr (FY 2024) | •••• | •••• | -5.0% | •••• | New Delhi, Delhi, India |
Peers are the five companies nearest above and the five nearest below Sandy Plastmould by revenue in the Manufacturing industry (Plastic Based Products), from the latest filed financials of each company. Net profit, margin and employee counts of each peer are in the company report.
Auditor Details of Sandy Plastmould Private Limited
Sandy Plastmould Private Limited is audited by Satish Shetty & Co for the financial year 2020.
| Name | Status | Appointment Date | Cessation Date |
|---|---|---|---|
| Satish Shetty & Co | Locked | Locked | Locked |
Premium access
Complete auditor history
Appointment and cessation dates and past auditor changes are in the company report.
- Appointment status
- Appointment dates
- Cessation dates
- Auditor changes
Verified entity values are shown only after access is granted.
Ownership and Shareholding of Sandy Plastmould Private Limited
Premium access
Shareholding and ownership data
Promoter, institutional, public and beneficial ownership figures are in the company report.
- Ownership categories
- Historical changes
- Group structure
- FII and DII holdings
Verified entity values are shown only after access is granted.
Charges & Borrowings of Sandy Plastmould Private Limited
Open charges
₹79.5 Lakh
Satisfied charges
None
Breakdown by lending institutions
Latest charge details
| Date | Lender | Amount | Status |
|---|---|---|---|
| 13 Jun 2019 | Sidbi | ₹44 Lakh | Open |
| 03 May 2014 | Idbi Bank Limited | ₹7 Lakh | Open |
| 26 Aug 2005 | The United Western Bank Ltd | ₹23.5 Lakh | Open |
| 11 Aug 2005 | Idbi Limited | ₹5 Lakh | Open |
Total charge records: 4 View all charges
Employees and EPFO Compliance at Sandy Plastmould Private Limited
Employment history and EPFO contributions of people linked to Sandy Plastmould.
Premium access
Employee and EPFO history
Monthly headcount, contribution history and filing status are in the company report.
- Monthly headcount
- PF contributions
- ECR filing status
- Establishment history
Verified entity values are shown only after access is granted.
Recent Activity on Sandy Plastmould Private Limited
Sandy Plastmould Private Limited has 3 board changes on record since 2005: 2 appointments and 1 cessation. The latest: Narayan Velayudhan Thadathil ceased to be Director on 03 Sep 2023.
AGM
Sandy Plastmould Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Filing
Sandy Plastmould Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Mumbai.
Ceased
Narayan Velayudhan Thadathil ceased to be Director.
Charges
A charge with Sidbi amounted to Rs. 44.00 Lakh with Charge ID 100267959 was registered on 13 Jun 2019.
Charges
A charge with Idbi Bank Limited amounted to Rs. 7.00 Lakh with Charge ID 10496373 was registered on 03 May 2014.
Charges
A charge with Idbi Limited of Rs. 5.00 Lakh registered on 11 Aug 2005 with Charge ID 90243876 was modified on 20 Nov 2006.
Charges
A charge with The United Western Bank Ltd amounted to Rs. 23.50 Lakh with Charge ID 90243881 was registered on 26 Aug 2005.
Charges
A charge with Idbi Limited amounted to Rs. 5.00 Lakh with Charge ID 90243876 was registered on 11 Aug 2005.
Appointed
Sandeep Narayan Thadathil was appointed as Director.
Appointed
Sunil Narayan Thadathil was appointed as Director.
Incorporation
08 Jun 2005
Sandy Plastmould Private Limited was registered on 08 Jun 2005 with Roc Mumbai & aged 21 years 4 months as per MCA records.
Credit Ratings, Litigation & Regulatory Alerts for Sandy Plastmould Private Limited
Premium access
Credit ratings, litigation, and regulatory alerts
Credit ratings, court records and regulatory alerts are in the company report.
- Rating history
- Court and tribunal cases
- Regulatory alerts
- Director-linked violations
Verified entity values are shown only after access is granted.
MSME Payment Delays by Sandy Plastmould Private Limited
Premium access
MSME payment history
Amounts due to small suppliers, the reasons given and MSME-1 filings are in the company report.
- Outstanding amounts
- Delay periods and reasons
- MSME-1 filing history
- Vendor payment signals
Verified entity values are shown only after access is granted.
Subsidiaries & Group Companies of Sandy Plastmould Private Limited
Premium access
Corporate group structure
Parent, subsidiary, associate and joint venture records with holdings are in the company report.
- Parent company
- Subsidiaries and ownership
- Associates and joint ventures
- Entity investments
Verified entity values are shown only after access is granted.
GST Compliance of Sandy Plastmould Private Limited
Sandy Plastmould has 1 GST registration: 1 active.
Total GSTINs
1
Active
1
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 27AAJCS0423K1ZB | Maharashtra | Active | 01 Jul 2017 |
Premium access
GST registrations and filing compliance
State-wise GST registrations, return filing status and HSN or SAC codes are in the company report.
- GSTIN registrations
- State-wise filing status
- HSN and SAC details
- Tax jurisdiction records
Verified entity values are shown only after access is granted.
MCA Filings & Documents of Sandy Plastmould Private Limited
Premium access
MCA filings and documents
Filed forms, annual returns, financial statements and charge filings with their dates are in the company report.
- Incorporation documents
- Annual returns and statements
- Charge filings
- Complete filing index
Verified entity values are shown only after access is granted.
Frequently Asked Questions about Sandy Plastmould Private Limited
Sandy Plastmould is an active private limited company based in Thane, Maharashtra, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 08 June 2005 (21+ years old) and is registered under CIN U25200MH2005PTC153864.
Sandy Plastmould reported revenue of ₹3.02 Cr for FY 2023 (up 38% YoY).
Sandy Plastmould has 2 current directors:
- Sunil Narayan Thadathil - Director
- Sandeep Narayan Thadathil - Director
Sandy Plastmould reported a net profit of ₹2.3 Lakh (net margin 0.8%) and EBITDA of ₹11.79 Lakh (EBITDA margin 3.9%) for FY 2023, as per its filed financial statements.
The compounded annual growth rate (CAGR) of the revenue of Sandy Plastmould is 16% over three years and 24% over five years. In the latest year (FY 2023) revenue rose 38%. CAGR is the steady yearly rate that links the first and the last year.
The GSTIN of Sandy Plastmould is 27AAJCS0423K1ZB, registered in Maharashtra.
The CIN (Corporate Identification Number) of Sandy Plastmould is U25200MH2005PTC153864. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Sandy Plastmould was incorporated on 08 June 2005, making it 21+ years old. It is registered with the Registrar of Companies, Mumbai.
The peers of Sandy Plastmould by revenue are A.V.Goel Plastic Industries Private Limited, Ambika Vyapar Private Limited, Compeng Composite Solutions (OPC) Private Limited, Manjira Rubber Industries Private Limited, K.B.Poly Industries Pvt. Ltd and 5 more, all in the Manufacturing industry (Plastic Based Products).
Narayan Velayudhan Thadathil ceased to be Director on 03 Sep 2023. Sandeep Narayan Thadathil was appointed as Director on 08 Jun 2005. Sunil Narayan Thadathil was appointed as Director on 08 Jun 2005.
Yes, Sandy Plastmould is registered as a micro enterprise under Udyam registration (number: UDYAM-MH-17-0021635).