MSME (Udyam registered) Ministry of MSME
- Category
- Micro (2023-24)
- Udyam number
- UDYAM-JH-22-0004361
Techno Machino & Fabco Private Limited
Techno Machino & Fabco Private Limited - engineering in Jamshedpur, Jharkhand, India. FY 2026 financials & compliance.
Revenue · FY 2024
₹62.63 Lakh
▲ 56% YoY
Net loss · FY 2024
₹4.92 Lakh
Net margin -7.9%
EBITDA · FY 2024
₹6.03 Lakh
EBITDA margin 9.6%
Authorised capital
₹40 Lakh
Registered with MCA
Paid-up capital
₹33.75 Lakh
Issued & subscribed
Open charges
₹1.05 Cr
Satisfied ₹24.49 Lakh
Company age
30 yrs
Est. 1996
Employees · EPFO
7
Provident fund records
About Techno Machino & Fabco Private Limited
Data last updated:
Techno Machino & Fabco Private Limited is a private limited company based in Jamshedpur, Jharkhand, India. It operates in the metal foundry and fabrication services segment of the engineering sector. It was incorporated on 09 May 1996 and has been in existence for over 30 years.
The company is registered with the Registrar of Companies (ROC), Ranchi, under CIN U27100JH1996PTC007233. The company has 1 GST registration on record, which is no longer active.
The company has an authorised share capital of ₹40 Lakh and a paid-up capital of ₹33.75 Lakh. It is led by directors Rinkey Katriar and Rupesh Katriar.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Large Shed No. – 9 Phase – III Adityapur Industrial Area, Jamshedpur, Jharkhand, India – 832109.
As per the financials filed for FY 2024, the company reported a revenue of ₹62.63 Lakh, a growth of 56% compared to the previous year. For the same year it recorded a net loss of ₹4.92 Lakh (net margin -7.9%) and EBITDA of ₹6.03 Lakh (EBITDA margin 9.6%). Revenue has declined at a compounded annual rate (CAGR) of 677% over three years and 18% over five years.
The company has about 7 employees on its provident fund (EPFO) records.
As per MCA filings, the company has open charges of ₹1.05 Cr and satisfied charges of ₹24.49 Lakh on record.
Techno Machino & Fabco Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-JH-22-0004361). The current compliance status is marked as compliant by the Registrar of Companies.
Company details
CIN U27100JH1996PTC007233
Registration Number 007233
Incorporation Date 09 May 1996
ROC Ranchi
Listing Status Unlisted
Company Status Active
Date of Last AGM 30 September 2025
Date of Balance Sheet 31 March 2025
Compliance Status Active Compliant
MSME Classification Micro
Udyam Registration UDYAM-JH-22-0004361
CIN history
Techno Machino & Fabco has one previous CIN (Corporate Identification Number): U99999JH1996PTC007233. The current CIN is U27100JH1996PTC007233, which is the unique identifier assigned by the Registrar of Companies.
| CIN | Status |
|---|---|
| U27100JH1996PTC007233 | Current |
| U99999JH1996PTC007233 | Previous |
Key People
Rinkey Katriar Director Rupesh Katriar Director Recognitions & Rankings of Techno Machino & Fabco
Contact details
Techno Machino & Fabco Private Limited's registered office is in Jamshedpur, Jharkhand. Its e-mail address and telephone number are in the company report.
- Email
- Telephone
- Registered AddressLarge Shed No. – 9 Phase – III Adityapur Industrial Area, Jamshedpur, Jharkhand, India – 832109
- IndustryEngineering, Metal Foundry & Fabrication Services
To see the full contact details of Techno Machino & Fabco Private Limited, buy the company report.
Comprehensive company report
Techno Machino & Fabco Private Limited - one report that includes everything
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included
Business activity
The main business activity of Techno Machino & Fabco is manufacturing. In detail, this covers metal and metal products.
| Main activity group code | Main activity | Business activity code | Business activity | Share of turnover |
|---|---|---|---|---|
| C | Manufacturing | C7 | Metal and metal products |
To see the full business activity and turnover split of Techno Machino & Fabco Private Limited, buy the company report.
Financials of Techno Machino & Fabco Private Limited
FY 2025 filings availableTechno Machino & Fabco Private Limited reported revenue of ₹62.63 Lakh (up 56% YoY) for FY 2024.
Revenue · FY 2024
₹62.63 Lakh ▲ 56%
Net loss · FY 2024
₹4.92 Lakh margin -7.9%
EBITDA · FY 2024
₹6.03 Lakh margin 9.6%
Compounded Annual Growth Rate (CAGR)
Revenue CAGR growth
1 year
▲ 56%
3 years · compounded
▲ 677%
5 years · compounded
▼ 18%
EBITDA CAGR growth
1 year
▲ 265%
3 years · compounded
▲ 30%
5 years · compounded
▼ 28%
Revenue rose 56% in the latest year, though over five years it has declined at a compounded annual rate (CAGR) of 18%. EBITDA rose 265% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.
Financial Statement Summary
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | ₹6.03 Lakh | ||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | -₹4.92 Lakh | ||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2023-24 | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | 9.6% | ||||
| Net Profit Margin | -7.9% | ||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Techno Machino & Fabco Private Limited, buy the company report.
Board of directors of Techno Machino & Fabco Private Limited
Techno Machino & Fabco has 2 current directors and 2 former directors. Current directors are listed first, with their designation and appointment date.
Current Directors
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Rinkey Katriar | Director | 08 Nov 2011 | 14 Years 11 Months | Current |
| Rupesh Katriar | Director | 29 Aug 2019 | 7 Years 2 Months | Current |
Auditor
Techno Machino & Fabco Private Limited is audited by MANISH MURLI KEDIA & CO for the financial year 2019.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| MANISH MURLI KEDIA & CO | FY 2019 | 010637C |
Shareholding
The shareholding of Techno Machino & Fabco Private Limited is on record for 3 financial years, the latest being FY 2019, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2019 | FY 2017 | FY 2016 |
|---|---|---|---|
| Promoters | |||
| Domestic institutional investors (DII) | |||
| Foreign institutional investors (FII) | |||
| Public | |||
| Others |
To see the full shareholding pattern of Techno Machino & Fabco Private Limited, buy the company report.
Charges & borrowings
Open charges
₹1.05 Cr
Satisfied charges
₹24.49 Lakh
Breakdown by lending institutions
Latest charge details
| Date | Charge ID | Lender | Amount | Status | Modified or satisfied on |
|---|---|---|---|---|---|
| 25 Sep 2025 | 101179337 | Others | ₹30 Lakh | Open | |
| 26 Sep 2014 | 10531027 | Axis Bank Limited | ₹75 Lakh | Open | |
| 25 Jan 2002 | 90264286 | State Bank of India | ₹24.49 Lakh | Satisfied |
To see the full charge records of Techno Machino & Fabco Private Limited, buy the company report.
Total charge records: 3 View all charges
Legal cases
No court or tribunal cases involving Techno Machino & Fabco Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Techno Machino & Fabco Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
Employees & EPFO
Techno Machino & Fabco Private Limited has a workforce of 7 employees on its EPFO records as of Apr 08, 2024, across 1 active EPFO establishment.
Employee count
7
Active EPFO establishments
1
GST
Techno Machino & Fabco has 1 GST registration on record, and it has been cancelled or is inactive. Only active GST numbers are listed on this page.
Total GSTINs
1
Cancelled / inactive
1
To see the full GST registrations and return filing status of Techno Machino & Fabco Private Limited, buy the company report.
Recent activity
Techno Machino & Fabco Private Limited has 5 board changes on record since 2001: 3 appointments and 2 cessations. The latest: Murari Katriar ceased to be Director on 04 Aug 2023.
AGM
Techno Machino & Fabco Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Charges
A charge with Others amounted to Rs. 30.00 Lakh with Charge ID 101179337 was registered on 25 Sep 2025.
Filing
Techno Machino & Fabco Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Ranchi.
Ceased
Murari Katriar ceased to be Director.
Appointed
Rupesh Katriar was appointed as Director.
Ceased
Rupesh Katriar ceased to be Managing Director.
Charges
A charge with Axis Bank Limited of Rs. 75.00 Lakh registered on 26 Sep 2014 with Charge ID 10531027 was modified on 06 May 2016.
Charges
A charge registered on 25 Jan 2002 via Charge ID 90264286 with State Bank Of India was fully satisfied on 21 Oct 2014.
Charges
A charge with Axis Bank Limited amounted to Rs. 75.00 Lakh with Charge ID 10531027 was registered on 26 Sep 2014.
Charges
A charge with State Bank Of India of Rs. 24.49 Lakh registered on 25 Jan 2002 with Charge ID 90264286 was modified on 03 Feb 2012.
Appointed
Rinkey Katriar was appointed as Director.
Charges
A charge with State Bank Of India amounted to Rs. 24.49 Lakh with Charge ID 90264286 was registered on 25 Jan 2002.
2 earlier events are in the company report.
Frequently asked questions
Techno Machino & Fabco is an active private limited company based in Jamshedpur, Jharkhand, India. The company works in metal foundry and fabrication services, within the engineering industry. It was incorporated on 09 May 1996 (30+ years old) and is registered under CIN U27100JH1996PTC007233.
Techno Machino & Fabco has 2 current directors:
- Rinkey Katriar - Director
- Rupesh Katriar - Director
The latest financial statements of Techno Machino & Fabco on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from 2015 are in the company report.
No. Techno Machino & Fabco has 1 GST registration on record and it is cancelled or inactive.
The CIN (Corporate Identification Number) of Techno Machino & Fabco is U27100JH1996PTC007233. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Techno Machino & Fabco was incorporated on 09 May 1996, making it 30+ years old. It is registered with the Registrar of Companies, Ranchi.
Murari Katriar ceased to be Director on 04 Aug 2023. Rupesh Katriar was appointed as Director on 29 Aug 2019. Rupesh Katriar ceased to be Managing Director on 09 Aug 2019. Techno Machino & Fabco has 5 board changes on record in total.
Yes, Techno Machino & Fabco is registered as a micro enterprise under Udyam registration (number: UDYAM-JH-22-0004361).
The registered office of Techno Machino & Fabco is at Large Shed No. – 9 Phase – III Adityapur Industrial Area, Jamshedpur, Jharkhand, India – 832109.
Techno Machino & Fabco operates in the engineering industry, in the metal foundry and fabrication services segment.