Zenith Extrusion and Moulding Private Limited
About Zenith Extrusion and Moulding Private Limited
Data last updated:
Zenith Extrusion and Moulding Private Limited is a private limited company based in Mumbai, Maharashtra, India. It operates in the industrial maintenance and repair services segment of the engineering sector. It was incorporated on 19 January 1995 and has been in existence for over 31 years.
The company is registered with the Registrar of Companies (ROC), Mumbai, under CIN U25200MH1995PTC084784. Its GSTIN is 27AADCA8836G1ZJ (Maharashtra). The company holds 3 GST registrations, of which 1 is active.
The company has an authorised share capital of ₹25 Lakh and a paid-up capital of ₹10 Lakh. It is led by directors Abdul Salam Azam Hussain Khan and Kalpesh Tagraj Mehta.
Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Mumbai, Maharashtra.
The current compliance status is marked as compliant by the Registrar of Companies.
Company details
Contact details
Zenith Extrusion and Moulding Private Limited's registered office is in Mumbai, Maharashtra. Its e-mail address is in the company report.
- Email
- Registered Address5 Floor – 0 A2 Sarkar Residency Dr Mascarenhas Road, Near Rangwala Compound Anjirwadi, Mumbai, Maharashtra, India – 400010
- IndustryEngineering, Industrial Maintenance & Repair Services
To see the full contact details of Zenith Extrusion and Moulding Private Limited, buy the company report.
- Company details, directors and signatories
- Historical financials and ratios
- Shareholding pattern and group structure
- Charges with holder and property details
- Legal cases, compliance and MCA filings
Financials of Zenith Extrusion and Moulding Private Limited
FY 2025 filings availableFinancial Statement Summary
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profit and Loss Statement | |||||
| Revenue from Operations | |||||
| Other Income | |||||
| Total Revenue | |||||
| Cost of Materials Consumed | |||||
| Employee Benefit Expense | |||||
| Finance Costs | |||||
| Depreciation and Amortisation | |||||
| Other Expenses | |||||
| Total Expenses | |||||
| EBITDA | |||||
| Profit Before Tax | |||||
| Tax Expense | |||||
| Net Profit (PAT) | |||||
| Balance Sheet | |||||
| Share Capital | |||||
| Reserves and Surplus | |||||
| Net Worth (Total Equity) | |||||
| Long-term Borrowings | |||||
| Short-term Borrowings | |||||
| Trade Payables | |||||
| Total Liabilities | |||||
| Fixed Assets | |||||
| Investments | |||||
| Inventories | |||||
| Trade Receivables | |||||
| Cash and Bank Balance | |||||
| Total Assets | |||||
Financial Ratios
| Metrics | FY 2022-23 | FY 2021-22 | FY 2020-21 | FY 2019-20 | FY 2018-19 |
|---|---|---|---|---|---|
| Profitability | |||||
| EBITDA Margin | |||||
| Net Profit Margin | |||||
| Return on Equity (ROE) | |||||
| Return on Capital Employed (ROCE) | |||||
| Return on Assets (ROA) | |||||
| Liquidity and Debt | |||||
| Current Ratio | |||||
| Quick Ratio | |||||
| Debt-to-Equity Ratio | |||||
| Interest Coverage Ratio | |||||
| Efficiency and Growth | |||||
| Asset Turnover | |||||
| Receivable Days | |||||
| Payable Days | |||||
| Inventory Days | |||||
| Revenue Growth | |||||
| Net Profit Growth | |||||
To see the full financial statements and ratios of Zenith Extrusion and Moulding Private Limited, buy the company report.
Board of directors of Zenith Extrusion and Moulding Private Limited
Zenith Extrusion and Moulding has 2 current directors and 12 former directors. Current directors are listed first, with their designation and appointment date.
| Name | Designation | Appointment Date | Tenure | Status |
|---|---|---|---|---|
| Abdul Salam Azam Hussain Khan | Director | 21 Aug 2024 | 2 Years 2 Months | Current |
| Kalpesh Tagraj Mehta | Director | 21 Aug 2024 | 2 Years 2 Months | Current |
Auditor
Zenith Extrusion and Moulding Private Limited is audited by C P PANDEY & CO for the financial year 2023.
| Auditor firm | Financial year | Firm registration number |
|---|---|---|
| C P PANDEY & CO | FY 2023 | 148808 |
Shareholding
The shareholding of Zenith Extrusion and Moulding Private Limited is on record for 5 financial years, the latest being FY 2023, split between promoters, domestic institutions, foreign institutions, public shareholders and others.
| Shareholder category | FY 2023 | FY 2022 | FY 2021 | FY 2020 | FY 2018 |
|---|---|---|---|---|---|
| Promoters | |||||
| Domestic institutional investors (DII) | |||||
| Foreign institutional investors (FII) | |||||
| Public | |||||
| Others |
To see the full shareholding pattern of Zenith Extrusion and Moulding Private Limited, buy the company report.
Legal cases
No court or tribunal cases involving Zenith Extrusion and Moulding Private Limited are on our record; a case search with case numbers, parties and status is in the company report Buy the company report.
MSME payment delays
No delayed payments to MSME suppliers are on our record for Zenith Extrusion and Moulding Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.
GST
Zenith Extrusion and Moulding has 3 GST registrations: 1 active and 2 cancelled or inactive.
| GSTIN | State | Status | Registered on |
|---|---|---|---|
| 27AADCA8836G1ZJ | Maharashtra | Active | 05 Jun 2025 |
To see the full GST registrations and return filing status of Zenith Extrusion and Moulding Private Limited, buy the company report.
Recent activity
Zenith Extrusion and Moulding Private Limited has 26 board changes on record since 2006: 14 appointments and 12 cessations. The latest: Abdhesh Ganesh Lal Das ceased to be Director on 06 Feb 2025.
17 earlier events are in the company report.
Frequently asked questions
Zenith Extrusion and Moulding is an active private limited company based in Mumbai, Maharashtra, India. The company works in industrial maintenance and repair services, within the engineering industry. It was incorporated on 19 January 1995 (31+ years old) and is registered under CIN U25200MH1995PTC084784.
Zenith Extrusion and Moulding has 2 current directors:
- Abdul Salam Azam Hussain Khan - Director
- Kalpesh Tagraj Mehta - Director
The latest financial statements of Zenith Extrusion and Moulding on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from 2015 are in the company report.
The GSTIN of Zenith Extrusion and Moulding is 27AADCA8836G1ZJ, registered in Maharashtra. The company has 3 GST registrations in all, of which 1 is active and 2 are cancelled or inactive.
The CIN (Corporate Identification Number) of Zenith Extrusion and Moulding is U25200MH1995PTC084784. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.
Zenith Extrusion and Moulding was incorporated on 19 January 1995, making it 31+ years old. It is registered with the Registrar of Companies, Mumbai.
Abdhesh Ganesh Lal Das ceased to be Director on 06 Feb 2025. Anil Kumar Karna ceased to be Director on 06 Feb 2025. Abdul Salam Azam Hussain Khan was appointed as Director on 21 Aug 2024. Zenith Extrusion and Moulding has 26 board changes on record in total.
The registered office of Zenith Extrusion and Moulding is at 5 Floor – 0 A2 Sarkar Residency Dr Mascarenhas Road, Near Rangwala Compound Anjirwadi, Mumbai, Maharashtra, India – 400010.
Zenith Extrusion and Moulding operates in the engineering industry, in the industrial maintenance and repair services segment.
The compliance status of Zenith Extrusion and Moulding is compliant as of 25 July 2026. The company is actively filing with the Registrar of Companies.
Sample company reports
The same report you get when you buy one: financials, directors, ownership, deals, charges, legal cases, brands and filings, with the Excel workbook alongside.
