Matha Machining Solutions & Toolings Private Limited

Matha Machining Solutions & Toolings Private Limited - manufacturing in Kochi, Kerala, India. FY 2026 financials & compliance.
CIN U29249KL2018PTC056086 Incorporated 24 December 2018 ROC Ernakulam HQ Kochi, Kerala, India
Active Private Limited Company manufacturing MSME · Micro
Revenue · FY 2025
₹1.97 Cr
▲ 55% YoY
Net loss · FY 2025
₹6.64 Lakh
Net margin -3.4%
EBITDA · FY 2025
₹18.65 Lakh
EBITDA margin 9.5%
Authorised capital
₹39 Lakh
Registered with MCA
Paid-up capital
₹39 Lakh
Issued & subscribed
Open charges
₹1.34 Cr
Secured borrowings
Company age
8 yrs
Est. 2018
Directors on board
2
As per MCA filings

About Matha Machining Solutions & Toolings Private Limited

Data last updated:

Matha Machining Solutions & Toolings Private Limited is a private limited company based in Kochi, Kerala, India. It operates in the plastic-based products segment of the manufacturing sector. It was incorporated on 24 December 2018 and has been in existence for over 8 years.

The company is registered with the Registrar of Companies (ROC), Ernakulam, under CIN U29249KL2018PTC056086. Its GSTIN is 32AAMCM3188Q1ZR (Kerala).

The company has an authorised share capital of ₹39 Lakh and a paid-up capital of ₹39 Lakh. It is led by directors Johny and Binoy Kuriakose.

Its last annual general meeting (AGM) was held on 30 September 2025, and its latest financial statements are for the year ended 31 March 2025. The registered office is at Kinfra Small Industries Park B3 Sdf Nellad P.O. Muvattupuzha, Kochi, Kerala, India – 686669.

As per the financials filed for FY 2025, the company reported a revenue of ₹1.97 Cr, a growth of 55% compared to the previous year. For the same year it recorded a net loss of ₹6.64 Lakh (net margin -3.4%) and EBITDA of ₹18.65 Lakh (EBITDA margin 9.5%). Revenue has grown at a compounded annual rate (CAGR) of 31% over three years and 44% over five years.

As per MCA filings, the company has open charges of ₹1.34 Cr on record.

Matha Machining Solutions & Toolings Private Limited is registered as a micro enterprise under the Udyam registration framework (Reg. No. UDYAM-KL-02-0017112).

Company details

CIN U29249KL2018PTC056086
Registration Number 056086
Incorporation Date 24 December 2018
ROC Ernakulam
Listing Status Unlisted
Company Status Active
MSME Classification Micro
Udyam Registration UDYAM-KL-02-0017112

Recognitions & Rankings of Matha Machining Solutions & Toolings

MSME (Udyam registered) Ministry of MSME
Category
Micro (2023-24)
Udyam number
UDYAM-KL-02-0017112

Contact details

Matha Machining Solutions & Toolings Private Limited's registered office is in Kochi, Kerala. Its e-mail address and telephone number are in the company report.

  • Email
  • Telephone
  • Registered Address
    Kinfra Small Industries Park B3 Sdf Nellad P.O. Muvattupuzha, Kochi, Kerala, India – 686669
  • Industry
    Manufacturing, Plastic-Based Products

To see the full contact details of Matha Machining Solutions & Toolings Private Limited, buy the company report.

Comprehensive company report
Matha Machining Solutions & Toolings Private Limited - one report that includes everything
  • Company details, directors and signatories
  • Historical financials and ratios
  • Shareholding pattern and group structure
  • Charges with holder and property details
  • Legal cases, compliance and MCA filings
₹799 ₹999 20% off excluding 18% GST
Secure checkout · GST invoice included

Business activity

The main business activity of Matha Machining Solutions & Toolings is manufacturing. In detail, this covers plastic products, non-metallic mineral products, rubber products, fabricated metal products.

Main activity group codeMain activityBusiness activity codeBusiness activityShare of turnover
CManufacturingC8Plastic products, non-metallic mineral products, rubber products, fabricated metal products

To see the full business activity and turnover split of Matha Machining Solutions & Toolings Private Limited, buy the company report.

Financials of Matha Machining Solutions & Toolings Private Limited

FY 2025 filings available

Matha Machining Solutions & Toolings Private Limited reported revenue of ₹1.97 Cr (up 55% YoY) for FY 2025.

Revenue · FY 2025
₹1.97 Cr ▲ 55%
Net loss · FY 2025
₹6.64 Lakh margin -3.4%
EBITDA · FY 2025
₹18.65 Lakh margin 9.5%

Compounded Annual Growth Rate (CAGR)

Revenue CAGR growth
1 year
▲ 55%
3 years · compounded
▲ 31%
5 years · compounded
▲ 44%
EBITDA CAGR growth
1 year
▲ 28%
3 years · compounded
▲ 2%
5 years · compounded
▲ 39%

Revenue has grown at a compounded annual rate (CAGR) of 44% over five years, including 55% growth in the latest year. EBITDA rose 28% in the latest year. Three- and five-year figures are compounded annual growth rates (CAGR): the steady yearly rate that links the first and the last year. All are worked out from the filed statements.

Financial Statement Summary

MetricsFY 2024-25FY 2023-24FY 2022-23FY 2021-22FY 2020-21
Profit and Loss Statement
Revenue from Operations
Other Income
Total Revenue
Cost of Materials Consumed
Employee Benefit Expense
Finance Costs
Depreciation and Amortisation
Other Expenses
Total Expenses
EBITDA₹18.65 Lakh
Profit Before Tax
Tax Expense
Net Profit (PAT)-₹6.64 Lakh
Balance Sheet
Share Capital
Reserves and Surplus
Net Worth (Total Equity)
Long-term Borrowings
Short-term Borrowings
Trade Payables
Total Liabilities
Fixed Assets
Investments
Inventories
Trade Receivables
Cash and Bank Balance
Total Assets

Financial Ratios

MetricsFY 2024-25FY 2023-24FY 2022-23FY 2021-22FY 2020-21
Profitability
EBITDA Margin9.5%
Net Profit Margin-3.4%
Return on Equity (ROE)
Return on Capital Employed (ROCE)
Return on Assets (ROA)
Liquidity and Debt
Current Ratio
Quick Ratio
Debt-to-Equity Ratio
Interest Coverage Ratio
Efficiency and Growth
Asset Turnover
Receivable Days
Payable Days
Inventory Days
Revenue Growth
Net Profit Growth

To see the full financial statements and ratios of Matha Machining Solutions & Toolings Private Limited, buy the company report.

Board of directors of Matha Machining Solutions & Toolings Private Limited

Matha Machining Solutions & Toolings has 2 current directors and 1 former director. Current directors are listed first, with their designation and appointment date.

Current Directors
NameDesignationAppointment DateTenureStatus
JohnyDirector24 Dec 20187 Years 10 MonthsCurrent
Binoy KuriakoseDirector24 Dec 20187 Years 10 MonthsCurrent

Peer comparison

Matha Machining Solutions & Toolings Private Limited is compared with the 3 companies closest to it by revenue in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products), from the latest filed financials of each company.

CompanyRevenueNet profitMarginGrowth (1 yr)EmployeesLocation
Samay Polyplast Private Limited₹1.99 Cr (FY 2025)-51.0%At Bharudi, Gujarat, India
Matha Machining Solutions & Toolings Private Limitedthis company₹1.97 Cr (FY 2025)-₹6.64 Lakh-3.4%55.0%Kochi, Kerala, India
Palriwal Chemicals Private Limited₹1.97 Cr (FY 2025)-9.0%Kolkata, West Bengal, India
Exakt Poly Private Limited₹1.97 Cr (FY 2025)12.0%West Bengal, India

To see the full peer comparison of Matha Machining Solutions & Toolings Private Limited, buy the company report.

Auditor

Matha Machining Solutions & Toolings Private Limited is audited by ELIAS GEORGE & CO for the financial year 2019.

Auditor firmFinancial yearFirm registration number
ELIAS GEORGE & COFY 2019000801S

Shareholding

The shareholding of Matha Machining Solutions & Toolings Private Limited is on record for FY 2019, split between promoters, domestic institutions, public shareholders and others.

Shareholder categoryFY 2019
Promoters
Domestic institutional investors (DII)
Public
Others

To see the full shareholding pattern of Matha Machining Solutions & Toolings Private Limited, buy the company report.

Charges & borrowings

Open charges
₹1.34 Cr
Satisfied charges
None
Breakdown by lending institutions
Sidbi₹1.34 Cr
Latest charge details
DateCharge IDLenderAmountStatusModified or satisfied on
20 Sep 2024100990026Sidbi₹40 LakhOpen
11 Apr 2022100568365Sidbi₹49.91 LakhOpen
03 Dec 2020100393038Sidbi₹22.5 LakhOpen
31 Jan 2020100327170Sidbi₹22 LakhOpen

Total charge records: 4 View all charges

MSME payment delays

No delayed payments to MSME suppliers are on our record for Matha Machining Solutions & Toolings Private Limited; the supplier-wise MSME Form 1 check is in the company report Buy the company report.

GST

Matha Machining Solutions & Toolings has 1 GST registration: 1 active.

Total GSTINs
1
Active
1
GSTINStateStatusRegistered on
32AAMCM3188Q1ZRKeralaActive01 Feb 2019

To see the full GST registrations and return filing status of Matha Machining Solutions & Toolings Private Limited, buy the company report.

Recent activity

Matha Machining Solutions & Toolings Private Limited has 3 board changes on record since 2018: 2 appointments and 1 cessation. The latest: Bins Antony ceased to be Director on 14 Jan 2021.

AGM
Matha Machining Solutions & Toolings Private Limited last Annual general meeting of members was held on 30 Sep 2025 as per latest MCA records.
Filing
Matha Machining Solutions & Toolings Private Limited has filed its annual Financial statements for the year ended 31 Mar 2025 with Roc Ernakulam.
Charges
A charge with Sidbi amounted to Rs. 40.00 Lakh with Charge ID 100990026 was registered on 20 Sep 2024.
Charges
A charge with Sidbi amounted to Rs. 49.91 Lakh with Charge ID 100568365 was registered on 11 Apr 2022.
Ceased
Bins Antony ceased to be Director.
Charges
A charge with Sidbi amounted to Rs. 22.50 Lakh with Charge ID 100393038 was registered on 03 Dec 2020.
Charges
A charge with Sidbi amounted to Rs. 22.00 Lakh with Charge ID 100327170 was registered on 31 Jan 2020.
Appointed
Binoy Kuriakose was appointed as Director.
Appointed
Johny was appointed as Director.
Incorporation
24 Dec 2018
Matha Machining Solutions & Toolings Private Limited was registered on 24 Dec 2018 with Roc Ernakulam & aged 7 years 10 months as per MCA records.

Frequently asked questions

Matha Machining Solutions & Toolings is an active private limited company based in Kochi, Kerala, India. The company works in plastic-based products, within the manufacturing industry. It was incorporated on 24 December 2018 (8+ years old) and is registered under CIN U29249KL2018PTC056086.

Matha Machining Solutions & Toolings has 2 current directors:

The latest financial statements of Matha Machining Solutions & Toolings on record with the MCA are for the year ended 31 March 2025. Its last annual general meeting was held on 30 September 2025. Year-wise statements from FY 2019 are in the company report.

The GSTIN of Matha Machining Solutions & Toolings is 32AAMCM3188Q1ZR, registered in Kerala.

The CIN (Corporate Identification Number) of Matha Machining Solutions & Toolings is U29249KL2018PTC056086. It is issued by the Ministry of Corporate Affairs under the Companies Act, 2013, and uniquely identifies the company in India.

Matha Machining Solutions & Toolings was incorporated on 24 December 2018, making it 8+ years old. It is registered with the Registrar of Companies, Ernakulam.

The peers of Matha Machining Solutions & Toolings by revenue are Samay Polyplast Private Limited, Palriwal Chemicals Private Limited, Exakt Poly Private Limited, all in the Manufacturing industry (Plastic Based Products), with the same principal business activity (plastic products, non-metallic mineral products, rubber products, fabricated metal products).

Bins Antony ceased to be Director on 14 Jan 2021. Binoy Kuriakose was appointed as Director on 24 Dec 2018. Johny was appointed as Director on 24 Dec 2018.

Yes, Matha Machining Solutions & Toolings is registered as a micro enterprise under Udyam registration (number: UDYAM-KL-02-0017112).

The registered office of Matha Machining Solutions & Toolings is at Kinfra Small Industries Park B3 Sdf Nellad P.O. Muvattupuzha, Kochi, Kerala, India – 686669.

Matha Machining Solutions & Toolings operates in the manufacturing industry, in the plastic-based products segment.